Description : What is the full form of 'IEEE' ? -How To ?
Last Answer : The full form of 'IEEE' is Institute of Electronics and Electrical Engineers
Description : Is Doble Testing valid on "Dry Type" transformers What is ANSI or IEEE 's opinion?
Last Answer : Refer this url to know about IEEE/ANSI
Description : IEEE stands for ___________ a) Instantaneous Electrical Engineering b) Institute of Emerging Electrical Engineers c) Institute of Emerging Electronic Engineers d) Institute of Electrical and electronics engineers
Last Answer : Answer: d Explanation: The IEEE is an organization of professionals in the field of electronics and electrical engineering. IEEE has given certain standards of its own which are followed in the field of computer science and electrical engineering
Description : What organization has published safety guidelines for the maximum limits of RF energy near the human body? A. The American National Standards Institute (ANSI). B. The Environmental Protection ... Communications Commission (FCC). D. The Institute Of Electrical and Electronics Engineers (IEEE).
Last Answer : A. The American National Standards Institute (ANSI).
Description : What is the role of IEEE in the world of computer network?
Last Answer : IEEE full form is the Institute of Electrical and electronic Engineer which is used to define and develop the standards which will be used over the network.
Description : The advantage of following the IEEE Standard for drawing up a Project Management Plan (SPMP) - see IEEE Standard 1059.1 1987 - is a) It is drawn up by representatives from major ... each organisation for a particular applicationarea, development team or technique. e) All of the above.
Last Answer : e) All of the above.
Description : The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above
Last Answer : none of the above
Description : IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2 C) 11 D) 22
Last Answer : 22
Description : IEEE 802.11b, has a datarate of _____Mbps. A) 1 B) 2 C) 5.5 D) none of the above
Last Answer : 5.5
Description : The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22
Last Answer : 1
Description : The IEEE 802.11g, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Last Answer : OFDM
Description : The IEEE 802.11b, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Last Answer : DSSS
Description : The IEEE 802.11a, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Description : The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Last Answer : either (a)or (b)
Description : . In IEEE 802.11, the addressing mechanism can include upto ______addresses. A) four B) five C) six D) none of the above
Description : In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above
Last Answer : four
Description : In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above
Last Answer : NAV
Description : In IEEE 802.11, the access method used in the PCF sublayer is ______. A) contention B) controlled C) polling D) none of the above
Last Answer : polling
Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above
Last Answer : CSMA/CA
Description : The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF
Last Answer : BSS; ESS
Description : In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11
Last Answer : 11
Description : In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11
Last Answer : 10
Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11
Last Answer : 01
Description : In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11
Last Answer : 00
Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)
Last Answer : PCF
Description : In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Last Answer : ESS-transition
Description : In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Last Answer : no-transition
Description : In IEEE 802.11, astation with ________ mobility iseither stationary (not moving) or moving only insidea BSS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Description : . In IEEE 802.11, communication between two stations in twodifferent BSSs usually occurs viatwo ________. A) BSSs B) ESSs C) APs D) none of the above
Last Answer : APs
Description : In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an infrastructurenetwork
Description : In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an ad hocarchitecture
Description : In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above
Last Answer : BSS
Description : IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2
Last Answer : IEEE 802.11
Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above
Last Answer : 1-persistent
Description : IEEE 802.1d specification, defines _________criteria for a transparent bridges. A) two B) three C) four D) none of the above
Last Answer : three
Description : Which organization has authority over interstate andinternational commerce in the communications field? A) ITU-T B) IEEE C) FCC D) ISOC
Last Answer : FCC
Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX
Last Answer : a. 1000 BASE-T
Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a
Last Answer : c. i-c, ii-a, iii-d, iv-b
Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network
Last Answer : CSMA/CD is not suitable for a high propagation delay
Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit
Last Answer : a. 1 byte
Description : Who developed standards for the OSI reference model? A. ISO B. ANSI C. IEEE D. ACM
Last Answer : A. ISO
Description : Who developed standards for the OSI reference model? a. ISO - International Standards Organization b. ANSI - American National Standards Institute c. IEEE - Institute of Electrical and Electronics Engineers d. ACM - Association for Computing Machinery
Last Answer : a. ISO - International Standards Organization
Description : Which of the following organisations looks at standard for representation of data on the internet ? 1) ISOC 2) W3C 3) IEEE 4) IETE
Last Answer : 2) W3C
Description : Which of the following organisations looks at standard for representation of data on the internet ? 1 ISOC 2 W3C 3 IEEE 4 IETE
Last Answer : 2 W3C
Description : IEEE has defined the specifications for a wireless LAN, called _______, which covers the physical and data link layers.
Last Answer : . IEEE 802.11
Description : The structure of an incident report is covered in the Standard for Software Test Documentation IEEE 829 and is called as : - a) Anomaly Report b) Defect Report c) Test Defect Report d) Test Incident Report
Last Answer : a) Anomaly Report
Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX
Last Answer : A) 1000 BASE-T
Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth A) i-b, ii-c, iii-d, iv-a B) i-c, ii-d, iii-a, iv-b C) i-c, ii-a, iii-d, iv-b D) i-b, ii-d, iii-c, iv-a
Last Answer : C) i-c, ii-a, iii-d, iv-b
Description : IEEE 830-1993 is a IEEE recommended standard for (A) Software requirement specification. (B) Software design. (C) Testing. (D) Both (A) and (B)
Last Answer : (A) Software requirement specification.