Is Doble Testing valid on "Dry Type" transformers What is ANSI or IEEE 's opinion?

Is Doble Testing valid on "Dry Type" transformers What is ANSI or IEEE 's opinion?
by

1 Answer

Answer :

Refer this url to know about IEEE/ANSI
by

Related questions

What organization has published safety guidelines for the maximum limits of RF energy near the human body? A. The American National Standards Institute (ANSI). B. The Environmental Protection Agency (EPA). C. The Federal Communications Commission (FCC). D. The Institute Of Electrical and Electronics Engineers (IEEE).

Description : What organization has published safety guidelines for the maximum limits of RF energy near the human body? A. The American National Standards Institute (ANSI). B. The Environmental Protection ... Communications Commission (FCC). D. The Institute Of Electrical and Electronics Engineers (IEEE).

Last Answer : A. The American National Standards Institute (ANSI).

Who developed standards for the OSI reference model? A. ISO B. ANSI C. IEEE D. ACM

Description : Who developed standards for the OSI reference model? A. ISO B. ANSI C. IEEE D. ACM

Last Answer : A. ISO

Who developed standards for the OSI reference model? a. ISO - International Standards Organization b. ANSI - American National Standards Institute c. IEEE - Institute of Electrical and Electronics Engineers d. ACM - Association for Computing Machinery

Description : Who developed standards for the OSI reference model? a. ISO - International Standards Organization b. ANSI - American National Standards Institute c. IEEE - Institute of Electrical and Electronics Engineers d. ACM - Association for Computing Machinery

Last Answer : a. ISO - International Standards Organization

The document standards for EDI were first developed by large business house during the 1970s and are now under the control of the following standard organisation: (A) ISO (B) ANSI (C) ITU-T (D) IEEE

Description : The document standards for EDI were first developed by large business house during the 1970s and are now under the control of the following standard organisation: (A) ISO (B) ANSI (C) ITU-T (D) IEEE

Last Answer : (B) ANSI

Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of dirt and conductive debris C. periodic testing of insulation resistance with a megger D. all of the above

Description : Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of ... debris C. periodic testing of insulation resistance with a megger D. all of the above

Last Answer : Answer: D

IEEE 830-1993 is a IEEE recommended standard for (A) Software requirement specification. (B) Software design. (C) Testing. (D) Both (A) and (B)

Description : IEEE 830-1993 is a IEEE recommended standard for (A) Software requirement specification. (B) Software design. (C) Testing. (D) Both (A) and (B)

Last Answer : (A) Software requirement specification.

In transformers, which ofthe following statements is valid?

Description : In transformers, which ofthe following statements is valid?  A) In an open circuit test, copper losses are obtained while in short circuit test, core losses are obtained B) In an open circuit test, ... drawn at zero power factor D) In an open circuit test, current is drawn at low power factor

Last Answer : In transformers, which ofthe following statements is valid?  A) In an open circuit test, copper losses are obtained while in short circuit test, core losses are obtained B) In an open circuit test, ... drawn at zero power factor D) In an open circuit test, current is drawn at low power factor

Impulse testing of transformers is done to determine the ability of:

Description :  Impulse testing of transformers is done to determine the ability of: A) bushings to withstand vibrations B) insulation to withstand transient voltages C) windings to withstand voltage fluctuations D) all of the above

Last Answer :  Impulse testing of transformers is done to determine the ability of: insulation to withstand transient voltages

Routine maintenance of dry-type transformers should include ____________. A. cleaning the windings, if accessible, with a vacuum cleaner or very low pressure air B. measuring and recording the winding temperature with an accurate mercury thermometer C. periodic cleaning of the winding insulation with an approved solvent D. making sure that the units are close to bulkheads or corners to protect them from damage

Description : Routine maintenance of dry-type transformers should include ____________. A. cleaning the windings, if accessible, with a vacuum cleaner or very low pressure air B. measuring and recording the winding ... . making sure that the units are close to bulkheads or corners to protect them from damage

Last Answer : Answer: A

Why should Dry-Type Transformers never be overloaded?

Description : Why should Dry-Type Transformers never be overloaded?

Last Answer : Overloading of a transformer results in excessive temperature. This excessive temperature causes overheating which will result in rapid deterioration of the insulation and cause complete failure of the transformer coils.

How do I change the default save for text files from ansi to utf-8?

Description : How do I change the default save for text files from ansi to utf-8?

Last Answer : answer:http://social.answers.microsoft.com/Forums/en-US/w7programs/thread/525f0ae7-121e-4eac-a6c2-cfe6b498712c 1. Right click -> New -> Text Document 2. Open New Text Document.txt ... \Software\Microsoft\Notepad Info: http://www.pc1news.com/saving-changes-to-notepad-configuration-1216.html

What is the full form of 'ANSI' ? -How To ?

Description : What is the full form of 'ANSI' ? -How To ?

Last Answer : The full form of 'ANSI' is American National Standards Institute

What is the ANSI equivalent to bs6323cfs 38k?

Description : What is the ANSI equivalent to bs6323cfs 38k?

Last Answer : Feel Free to Answer

When a key is pressed on the keyboard, which standard is used for converting the keystroke into the corresponding bits? A) ANSI B) ASCII C) EBCDIC D) ISO

Description : When a key is pressed on the keyboard, which standard is used for converting the keystroke into the corresponding bits? A) ANSI B) ASCII C) EBCDIC D) ISO

Last Answer : Answer : A

isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : SDH

ANSI stands for: a) American National Standards Institute b) Asia National Standards Institute c) Australia National Standards Institute d) None of These

Description : ANSI stands for: a) American National Standards Institute b) Asia National Standards Institute c) Australia National Standards Institute d) None of These

Last Answer : a) American National Standards Institute

When a key is pressed on the keyboard,which standard is used for converting the keystroke into the corresponding bits 1) ANSI 2) ASCII 3) EBCDIC 4) ISO

Description : When a key is pressed on the keyboard,which standard is used for converting the keystroke into the corresponding bits 1) ANSI 2) ASCII 3) EBCDIC 4) ISO

Last Answer : 1) ANSI

When a key is pressed on the keyboard,which standard is used for converting thekeystroke into the corresponding bits 1 ANSI 2 ASCII 3 EBCDIC 4 ISO

Description : When a key is pressed on the keyboard,which standard is used for converting thekeystroke into the corresponding bits 1 ANSI 2 ASCII 3 EBCDIC 4 ISO

Last Answer : 1 ANSI

_______ is a standard developed by ANSI for fiber-optic networks.

Description : _______ is a standard developed by ANSI for fiber-optic networks.

Last Answer : SONET

ANSI X.12 is a standard developed by a. American National Standard Institute b. International Standard Institute c. European Common Market d. United Nations Economic Commission for Europe

Description : ANSI X.12 is a standard developed by a. American National Standard Institute b. International Standard Institute c. European Common Market d. United Nations Economic Commission for Europe

Last Answer : a. American National Standard Institute 

Select the code, which is not correct about Venn diagram: (A) Venn diagram represents propositions as well as classes. (B) It can provide clear method of notation. (C) It can be either valid or invalid. (D) It can provide the direct method of testing the validity.

Description : Select the code, which is not correct about Venn diagram: (A) Venn diagram represents propositions as well as classes. (B) It can provide clear method of notation. (C) It can be either valid or invalid. (D) It can provide the direct method of testing the validity.

Last Answer : (C) It can be either valid or invalid. 

IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s

Description : IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s

Last Answer : C. 1 Mb/s to up to 6.75 Gb/s 

Which of the following is an indication of lack of objectivity of an auditor? a. The auditor believes that accounts receivable may not be collectible, but accepts management's opinion without an independent evaluation. b. In preparing client's tax return, the CPA encourages client to take a deduction which the CPA believes is valid, but for which there is some but not complete support. c. Both a and b above would be a violation d. Neither would be a violation

Description : Which of the following is an indication of lack of objectivity of an auditor? a. The auditor believes that accounts receivable may not be collectible, but accepts management's opinion without an independent evaluation. ... . c. Both a and b above would be a violation d. Neither would be a violation

Last Answer : The auditor believes that accounts receivable may not be collectible, but accepts management's opinion without an independent evaluation.

What to do if wet feet fall on dry place of urine ? My niece who is 02 years old. Pisses on the floor of the house. I wiped the place well with a damp cloth twice and then dried in the fan air. It didn't even smell of urine. Then after performing ablution for prayer, wet feet accidentally fall on the place of urination. In this situation I have prayed without washing my feet. Has my prayer been valid ? Was it important to wash your feet ?

Description : What to do if wet feet fall on dry place of urine ? My niece who is 02 years old. Pisses on the floor of the house. I wiped the place well with a damp cloth twice and then dried in the fan ... I have prayed without washing my feet. Has my prayer been valid ? Was it important to wash your feet ?

Last Answer : : In the case in question, your prayer is valid. Wet feet do not make your feet unclean. This is because after wiping the floor, it dries up and the effects of impurity disappear. (Musannaf Ibn Abi Shaybah 1/431 ; Nasbur Raya 1/26 ; Elaus Sunan 1/398 ; Fatawa Khaniya 1/25 ; Khulasatul Fatawa 1/42)

What is the full form of 'IEEE' ? -How To ?

Description : What is the full form of 'IEEE' ? -How To ?

Last Answer : The full form of 'IEEE' is Institute of Electronics and Electrical Engineers

What is the full form of IEEE ?

Last Answer : IEEE - Institute of Electrical and Electronics Engineers

IEEE stands for ___________ a) Instantaneous Electrical Engineering b) Institute of Emerging Electrical Engineers c) Institute of Emerging Electronic Engineers d) Institute of Electrical and electronics engineers

Description : IEEE stands for ___________ a) Instantaneous Electrical Engineering b) Institute of Emerging Electrical Engineers c) Institute of Emerging Electronic Engineers d) Institute of Electrical and electronics engineers

Last Answer : Answer: d Explanation: The IEEE is an organization of professionals in the field of electronics and electrical engineering. IEEE has given certain standards of its own which are followed in the field of computer science and electrical engineering

What is the role of IEEE in the world of computer network?

Description : What is the role of IEEE in the world of computer network?

Last Answer : IEEE full form is the Institute of Electrical and electronic Engineer which is used to define and develop the standards which will be used over the network.

The advantage of following the IEEE Standard for drawing up aProject Management Plan (SPMP) – see IEEE Standard 1059.1 1987 – is a) It is drawn up by representatives from major development organisations b) It is designed for all types of products c) It is a framework that can be used irrespective of process model or specific techniques d) It can be tailored for each organisation for a particular applicationarea, development team or technique. e) All of the above.

Description : The advantage of following the IEEE Standard for drawing up a Project Management Plan (SPMP) - see IEEE Standard 1059.1 1987 - is a) It is drawn up by representatives from major  ... each organisation for a  particular applicationarea, development team or  technique. e) All of the above.

Last Answer : e) All of the above.

The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above

Description : The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above

Last Answer : none of the above

IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2C) 11 D) 22

Description : IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2 C) 11 D) 22

Last Answer : 22

IEEE 802.11b, has a datarate of _____Mbps. A) 1 B) 2 C) 5.5 D) none of the above

Description : IEEE 802.11b, has a datarate of _____Mbps. A) 1 B) 2 C) 5.5 D) none of the above

Last Answer : 5.5

The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22

Description : The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22

Last Answer : 1

The IEEE 802.11g, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Description : The IEEE 802.11g, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Last Answer : OFDM

The IEEE 802.11b, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Description : The IEEE 802.11b, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Last Answer : DSSS

The IEEE 802.11a, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Description : The IEEE 802.11a, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Last Answer : OFDM

The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Description : The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Last Answer : either (a)or (b)

. In IEEE 802.11, the addressing mechanism can include upto ______addresses. A) four B) five C) six D) none of the above

Description : . In IEEE 802.11, the addressing mechanism can include upto ______addresses. A) four B) five C) six D) none of the above

Last Answer : none of the above

In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above

Description : In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above

Last Answer : four

In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above

Description : In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above

Last Answer : NAV

In IEEE 802.11, the access method used in the PCF sublayer is ______. A) contention B) controlled C) polling D) none of the above

Description : In IEEE 802.11, the access method used in the PCF sublayer is ______. A) contention B) controlled C) polling D) none of the above

Last Answer : polling

In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Last Answer : CSMA/CA

The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Description : The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Last Answer : BSS; ESS

In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11

Last Answer : 11

In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11

Last Answer : 10

In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11

Last Answer : 01

In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11

Last Answer : 00

In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PCF

In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Description : In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Last Answer : ESS-transition