What is the source of the audio signal ?

What is the source of the audio signal ?
by

1 Answer

Answer :

Audio signal source word 8
by

Related questions

Is the timer signal in Jenn Air JMV8186AAB 1.9 CuFt Over-The-Range Microwave Oven, is both audio and light signal?

Description : Is the timer signal in Jenn Air JMV8186AAB 1.9 CuFt Over-The-Range Microwave Oven, is both audio and light signal?

Last Answer : The Jenn Air Over the Range Microwave oven, has audio signals for a timer.

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

Which is technique used to transmit audio signal in television broadcasts?

Description : Which is technique used to transmit audio signal in television broadcasts?

Last Answer : Frequency modulation

What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Description : What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Last Answer : A. Interference to adjacent channel

Which of the following is not a baseband signal modulation? A. RF carrier B. Video System C. Audio signal D. Binary coded pulses

Description : Which of the following is not a baseband signal modulation? A. RF carrier B. Video System C. Audio signal D. Binary coded pulses

Last Answer : A. RF carrier

What does a tone control circuit in a receiver do to the audio signal?

Description : What does a tone control circuit in a receiver do to the audio signal?

Last Answer : It controls the amount of bass and treble response.

Any way to directly download an audio source file when the web page is using a javascript audio player (that doesn't use filenames like "x.mp3")?

Description : Any way to directly download an audio source file when the web page is using a javascript audio player (that doesn't use filenames like "x.mp3")?

Last Answer : Could try file2hd.com to see if you can find the resource.

Can anyone recommend a source for determining over the air TV signal strength in my neighborhood?

Description : Can anyone recommend a source for determining over the air TV signal strength in my neighborhood?

Last Answer : Here

Which terminology deals with the excitation or stimulus applied to the system from an external source for the generation of an output? a. Input signal b. Output signal c. Error signal d. Feedback signal

Description : Which terminology deals with the excitation or stimulus applied to the system from an external source for the generation of an output? a. Input signal b. Output signal c. Error signal d. Feedback signal

Last Answer : Ans: A

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Description : Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Last Answer : B. channel

Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Description : Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Last Answer : A. Transmission system engineering

The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSSC)FHSSD)TDM

Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : FHSS

The ______ layer is responsible for the movementof a signal from its optical source to its optical destination. A) section B) line C) path D) photonic

Description : The ______ layer is responsible for the movementof a signal from its optical source to its optical destination. A) section B) line C) path D) photonic

Last Answer : line

An FET has a gate source bias of 2 V. The ac input signal is ± 1.2 V. The class of operation is A) A B) B C) C D) AB

Description : An FET has a gate source bias of 2 V. The ac input signal is ± 1.2 V. The class of operation is A) A B) B C) C D) AB

Last Answer : D) AB

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.

Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Description : Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Last Answer : Differential group delay t(l).

The desirable characteristics of a signal source are : -

Description : The desirable characteristics of a signal source are : - a) the frequency of the signal should be well known and stable b) the amplitude of the signal source should be controllable from very small to relatively large value c) The output signal should be free from distortion d) all the above

Last Answer : The desirable characteristics of a signal source are : - a) the frequency of the signal should be well known and stable b) the amplitude of the signal source should be controllable from very small to relatively large value c) The output signal should be free from distortion d) all the above