The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSSC)FHSSD)TDM

The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one
carrier frequency; at the next moment, thesignal modulates another carrier frequency.
A)
FDM
B)
DSSS
C)
FHSS
D)
TDM
by

1 Answer

Answer :

FHSS
by

Related questions

Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Description : Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Last Answer : FDM

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK

Description : DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK

Last Answer : FDM; QAM

_____ isa digital multiplexing technique for combiningseveral low-ratechannels into onehigh-rate one. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isa digital multiplexing technique for combiningseveral low-ratechannels into onehigh-rate one. A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

_____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Description : Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Last Answer : WDM

Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above

Description : Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Last Answer : (a) and (c)

One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Description : One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Last Answer : A. noise is amplified with voice when an FDM system is used

An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above

Description : An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above

Last Answer : TDM-n

In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to

Description : In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to

Last Answer : greater than

In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as the amplitudeof the information signal changes, thefrequency of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Last Answer : FM

Carrier is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. the condition whentwo or more sections attempt to use the same channel at the same time D. a collection of interconnected functional units that provides a data communications service among stations attached tothe network E. None of the above

Description : Carrier is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. ... that provides a data communications service among stations attached tothe network E. None of the above

Last Answer : a continuous frequency capableof being modulated or impressed witha second signa

We candivide ____ into two different schemes: synchronousor statistical. A) FDM B) TDM C) WDM D) none of the above

Description : We candivide ____ into two different schemes: synchronousor statistical. A) FDM B) TDM C) WDM D) none of the above

Last Answer : TDM

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz

_____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

____ is designed to use thehigh bandwidthcapabilityof fiber-optic cable. A) FDM B) TDM C) WDM D) None of the above

Description : ____ is designed to use thehigh bandwidthcapabilityof fiber-optic cable. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : PM

Inan HFC network, the upstream data are modulated using the _______ modulation technique. A) QAM B) QPSK C) PCM D) ASK

Description : Inan HFC network, the upstream data are modulated using the _______ modulation technique. A) QAM B) QPSK C) PCM D) ASK

Last Answer : QPSK

Inan HFC network, the downstream data are modulated using the _______ modulation technique. A) PSK B) QAM C) PCM D) ASK

Description : Inan HFC network, the downstream data are modulated using the _______ modulation technique. A) PSK B) QAM C) PCM D) ASK

Last Answer : QAM

In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Last Answer : n

When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled

Description : When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled

Last Answer : distancea signal or bit has traveled

Which of the following is oldest multiplexing scheme? A. Frequency Division Multiplexing (FDM) B. Time Division Multiplexing (TDM) C. Code Division Multiplexing (CDM) D. Space Division Multiplexing (SDM)

Description : Which of the following is oldest multiplexing scheme? A. Frequency Division Multiplexing (FDM) B. Time Division Multiplexing (TDM) C. Code Division Multiplexing (CDM) D. Space Division Multiplexing (SDM)

Last Answer : D. Space Division Multiplexing (SDM)

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

If frequency of modulated wave is less than frequency of carrier wave, then input signal is A. negative B. positive C. zero D. infinite

Description : If frequency of modulated wave is less than frequency of carrier wave, then input signal is A. negative B. positive C. zero D. infinite

Last Answer : negative

A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz

Description : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly

Last Answer : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly 4 Ghz

Infiber optics, thesignal is_______ waves. A) light B) radio C) infrared D) very low-frequency

Description : Infiber optics, thesignal is_______ waves. A) light B) radio C) infrared D) very low-frequency

Last Answer : light

Contention is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. the condition whentwo or more stations attempt to use the same channel at the same time D. a collection of interconnected functional units that provides a data communications service among stations attached tothe network E. None of the above

Description : Contention is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. ... that provides a data communications service among stations attached tothe network E. None of the above

Last Answer : the condition whentwo or more stations attempt to use the same channel at the same time

In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated

Description : In amplitude modulation technique the unmodulated carrier is referred to as having ______. A. 100% modulation B. 0% modulation C. 50% modulated D. Over modulated

Last Answer : B. 0% modulation

The _____of a composite signal is the difference between the highest and the lowest frequencies contained in that signal. A) frequency B) period C) bandwidth D) amplitude

Description : The _____of a composite signal is the difference between the highest and the lowest frequencies contained in that signal. A) frequency B) period C) bandwidth D) amplitude

Last Answer : frequency

Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Description : Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Last Answer : C. TDM

Using_________each connected device is assigned a time slot whether or not the device has any thing to send. (A) WDM (B) FDM (C) TDM (D) STDM

Description : Using_________each connected device is assigned a time slot whether or not the device has any thing to send. (A) WDM (B) FDM (C) TDM (D) STDM

Last Answer : (C) TDM

Time synchronization is necessary in (A) FDM. (B) TDM. (C) WDM. (D) Quadrature multiplexing

Description : Time synchronization is necessary in (A) FDM. (B) TDM. (C) WDM. (D) Quadrature multiplexing

Last Answer : (B) TDM.

Compare FDM & TDM systems

Description : Compare FDM & TDM systems

Last Answer : Sr. No. FDM TDM 1 Divides the channel into the two or more frequency ranges that do not overlap. Divides and allocates certain Time periods to each channel. 2 Code word is ... Needs guard bands  Needs guard time 4 Problem of crosstalk No problem of crosstalk

What is the first symbol of a radio signal transmission having an amplitude modulated signal carrier, double side band? A. C B. B C. H D. A

Description : What is the first symbol of a radio signal transmission having an amplitude modulated signal carrier, double side band? A. C B. B C. H D. A

Last Answer : D. A

The modulated picture carrier wave includes the composite video signal as the:

Description : The modulated picture carrier wave includes the composite video signal as the:

Last Answer : Symmetric envelope of amplitude variations

In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above

Description : In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above

Last Answer : OOK

In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM

Description : In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM

Last Answer : ASK

Given an AM radio signal with abandwidth of10 KHzand the highest-frequency component at 705 KHz, what is the frequency of the carrier signal? A) 700 KHz B) 705 KHz C) 710 KHz D) Cannot bedetermined from giveninformation

Description : Given an AM radio signal with abandwidth of10 KHzand the highest-frequency component at 705 KHz, what is the frequency of the carrier signal? A) 700 KHz B) 705 KHz C) 710 KHz D) Cannot bedetermined from giveninformation

Last Answer : 700 KHz

SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Last Answer : none of the above

______ finds the value of thesignal amplitudefor eachsample; ____ finds the change from the previous sample. A) DM; PCM B) PCM; DM C) DM; CM D) none of the abov

Description : ______ finds the value of thesignal amplitudefor eachsample; ____ finds the change from the previous sample. A) DM; PCM B) PCM; DM C) DM; CM D) none of the abov

Last Answer : PCM; DM

In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : AM

How many carrier frequencies are used in QPSK? A) 2 B) 1 C) 0 D) none of the above

Description : How many carrier frequencies are used in QPSK? A) 2 B) 1 C) 0 D) none of the above

Last Answer : 2

How many carrier frequencies are used in BPSK? A) 2 B) 1 C) 0 D) none of the above

Description : How many carrier frequencies are used in BPSK? A) 2 B) 1 C) 0 D) none of the above

Last Answer : 1

How many carrier frequencies are used in BFSK? A) 2 B) 1 C) 0 D) none of the above

Description : How many carrier frequencies are used in BFSK? A) 2 B) 1 C) 0 D) none of the above

Last Answer : 2

How many carrier frequencies are used in BASK? A) 2B) 1 C) 0 D) none of the above

Description : How many carrier frequencies are used in BASK? A) 2 B) 1 C) 0 D) none of the above

Last Answer : 1

Geodimeter is based on: (A) Propagation of modulated light waves (B) Propagation of infrared radiation (C) The visible light as carrier with frequency of the order of 5 × 1014 Hz (D) High frequency radio waves

Description : Geodimeter is based on: (A) Propagation of modulated light waves (B) Propagation of infrared radiation (C) The visible light as carrier with frequency of the order of 5 × 1014 Hz (D) High frequency radio waves

Last Answer : Answer: Option A

One of the following is not among the advantages of series modulation A. No transformer B. Suppressed white noise C. Simple.D. Modulates any frequency

Description : One of the following is not among the advantages of series modulation A. No transformer B. Suppressed white noise C. Simple D. Modulates any frequency

Last Answer : B. Suppressed white noise

A 4.5-MHz signal which is equal to the difference between the picture and sound RF carrier frequencies in a 6-MHz TV channel.

Description : A 4.5-MHz signal which is equal to the difference between the picture and sound RF carrier frequencies in a 6-MHz TV channel.

Last Answer : Intercarrier frequencY