Which is technique used to transmit audio signal in television broadcasts?

Which is technique used to transmit audio signal in television broadcasts?
by

1 Answer

Answer :

Frequency modulation
by

Related questions

After watching a TV episode online, I now get occasional audio ads & broadcasts on my PC. How to find and remove?

Description : After watching a TV episode online, I now get occasional audio ads & broadcasts on my PC. How to find and remove?

Last Answer : Are you still online? Try turning off your wireless or unplugging your ethernet.

How to listen from the US to BBC (UK) web audio broadcasts?

Description : How to listen from the US to BBC (UK) web audio broadcasts?

Last Answer : answer:1. Move to the UK. 2. Or if option 1 doesn’t work for you then you need to make your IP address look like you’re in the UK. soemhow

What things about NPR broadcasts bother you, other than the content?

Description : What things about NPR broadcasts bother you, other than the content?

Last Answer : So is a habit, as are rising inflections. The latter seems to be a bit epidemical. Repeating the name is a common technique to remember names. Could be mandated by the station. Sorry, ... call in in rapid succession, remembering every name on the spot is nigh on impossible. Hence the repetition.

Who broadcasts the chicago new year?(NBC, ABC, FOX)

Description : Who broadcasts the chicago new year?(NBC, ABC, FOX)

Last Answer : i think bt im nt sure the ABC

German WWII radio broadcasts translated?

Description : German WWII radio broadcasts translated?

Last Answer : You may enjoy this site.

Where will the 2016 Mr Olympia broadcasts be?

Description : Where can I watch the 2016 Mr. Olympics online or on TV? 

Last Answer : At this link you can watch Mr. Olympia online! :) 

What is the wavelength of a radio photon from an A.M. radio station that broadcasts at 1360 kilohertz?

Description : What is the wavelength of a radio photon from an A.M. radio station that broadcasts at 1360 kilohertz?

Last Answer : 300 / 1.36 = 220.588 metres (rounded to three decimalplaces).

Why are we able to hear shortwave broadcasts better than long wave broadcasts? (a) Short wave broadcasts are made by nearby radio stations (b) Short waves are unaffected by atmospheric disturbances (c) Short waves are more energetic than long waves (d) By convention, short waves are meant for long distances whereas long waves are reserved for short distances

Description : Why are we able to hear shortwave broadcasts better than long wave broadcasts? (a) Short wave broadcasts are made by nearby radio stations (b) Short waves are unaffected by atmospheric ... convention, short waves are meant for long distances whereas long waves are reserved for short distances

Last Answer : Ans:(c) Direction: In the following question, a statement of Assertion (A) is given followed by corresponding Reason (R), just below it. Read the statements carefully and mark the correct answer: (a) If both A and ... true but R is not the correct explanation of A. (c) If A is true but R is false

Why are we able to hear short wave broadcasts better than long wave broadcasts? (1) Short waves are more energetic than long waves (2) Short waves are unaffected by atmospheric disturbances (3) Short wave broadcasts are made by nearby radio stations (4) By convention, short waves are meant for long distances, whereas long waves are reserved for short distances

Description : Why are we able to hear short wave broadcasts better than long wave broadcasts? (1) Short waves are more energetic than long waves (2) Short waves are unaffected by atmospheric disturbances ... convention, short waves are meant for long distances, whereas long waves are reserved for short distances

Last Answer : (1) Short waves are more energetic than long waves Explanation: Shortwave radio is used for broadcasting of voice and music, and longdistance communication to ships and aircraft, or to remote areas ... wired communication or other radio services and that's why it is more energetic than long waves.

Most AM broadcasts employ ___ polarization while most FM broadcasts employ ___ polarization of the radio wave. A. vertical, vertical B. vertical, horizontal C. horizontal, vertical D. horizontal, horizontal

Description : Most AM broadcasts employ ___ polarization while most FM broadcasts employ ___ polarization of the radio wave. A. vertical, vertical B. vertical, horizontal C. horizontal, vertical D. horizontal, horizontal

Last Answer : B. vertical, horizontal

This is referred to as a fixed radio station that broadcasts program material from studio to transmitter by radio link. A. Aural BC intercity relay B. Aural broadcast STL C. Shortwave station D. Remote-pickup

Description : This is referred to as a fixed radio station that broadcasts program material from studio to transmitter by radio link. A. Aural BC intercity relay B. Aural broadcast STL C. Shortwave station D. Remote-pickup

Last Answer : B. Aural broadcast STL

Why are we able to hear short wave broadcasts better than long wave broadcasts ? (1) Short waves are more energetic than long waves. (2) Short waves are unaffected by atmospheric disturbances. (3) Short wave broadcasts are made by nearby radio stations. (4) By convention, short waves are meant for long distances, whereas long waves are reserved for short distances.

Description : Why are we able to hear short wave broadcasts better than long wave broadcasts ? (1) Short waves are more energetic than long waves. (2) Short waves are unaffected by atmospheric ... convention, short waves are meant for long distances, whereas long waves are reserved for short distances.

Last Answer : Short waves are more energetic than long waves.

When we transmit signal over a long distance, the intensity of the signal is reduced. What could be the solution for this problem? -Technology

Description : When we transmit signal over a long distance, the intensity of the signal is reduced. What could be the solution for this problem? -Technology

Last Answer : We can use a networking device called repeater, regenerates the feeble signal and transmit it.

When we transmit signal over a long distance, the intensity of the signal is reduced. What could be the solution for this problem? -Technology

Description : When we transmit signal over a long distance, the intensity of the signal is reduced. What could be the solution for this problem? -Technology

Last Answer : We can use a networking device called repeater, regenerates the feeble signal and transmit it.

Do they make toy RC planes that will transmit a video signal back?

Description : Do they make toy RC planes that will transmit a video signal back?

Last Answer : Yes the Vortex Extreme 3 Channel RC Airplane With Eyecam Video Camera.

Consider the following statements: 1. In a direct-to-home (DTH) system, the viewer dish antenna picks up signals from the satellite directly. 2. Cable operators receive signal from the satellite on large community dish antennas and then transmit to the viewers’ sets. Which of the above statements is/are correct? (a) Only 1 (b) Only 2 (c) Both 1 and 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. In a direct-to-home (DTH) system, the viewer dish antenna picks up signals from the satellite directly. 2. Cable operators receive signal from the satellite on large community dish antennas and ... ? (a) Only 1 (b) Only 2 (c) Both 1 and 2 (d) Neither 1 nor 2

Last Answer : Ans:(c)

A digital carrier facility used to transmit a DSI-formatted signal at 1.544. Mbps. A. T2 B. T1 C. T4 D. T3

Description : A digital carrier facility used to transmit a DSI-formatted signal at 1.544. Mbps. A. T2 B. T1 C. T4 D. T3

Last Answer : B. T1

Communication satellite are used to a) Transmit communication signal only b)Receive Communication signal only c)Receive and redirect communication signal d)Provides information of natural resources only

Description : Communication satellite are used to a) Transmit communication signal only b)Receive Communication signal only c)Receive and redirect communication signal d)Provides information of natural resources only

Last Answer : c)Receive and redirect communication signal

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Description : If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Last Answer : 28. 50.

Communication satellites are used to: (1) To transmit communication signals (2) To receive and redirect communication signals (3) To only receive communication signal (4) To provide information of national sources only

Description : Communication satellites are used to: (1) To transmit communication signals (2) To receive and redirect communication signals (3) To only receive communication signal (4) To provide information of national sources only

Last Answer : To receive and redirect communication signals

For the technically minded, can anyone explain the rationale around the urge for television manufacturers to skimp on the audio quality of their products.

Description : For the technically minded, can anyone explain the rationale around the urge for television manufacturers to skimp on the audio quality of their products.

Last Answer : I would have thought it comes down to size. CRT’s had a bigger housing so there was more space for speakers. Bigger speakers produce more sound. Flat screen TV’s have a much smaller footprint and there seems to be a race to produce thinner and thinner displays leaving much less space for speakers.

I've been offered a job as a marketing audio gain technician at a local television station. Should I accept the position?

Description : I've been offered a job as a marketing audio gain technician at a local television station. Should I accept the position?

Last Answer : Yes.

What traditional marketing technique is YouTube closest to? A. Print advertising B. Radio advertising C. Mail Advertising D. Television advertising

Description : What traditional marketing technique is YouTube closest to? A. Print advertising B. Radio advertising C. Mail Advertising D. Television advertising

Last Answer : D. Television advertising

What is the source of the audio signal ?

Description : What is the source of the audio signal ?

Last Answer : Audio signal source word 8

Is the timer signal in Jenn Air JMV8186AAB 1.9 CuFt Over-The-Range Microwave Oven, is both audio and light signal?

Description : Is the timer signal in Jenn Air JMV8186AAB 1.9 CuFt Over-The-Range Microwave Oven, is both audio and light signal?

Last Answer : The Jenn Air Over the Range Microwave oven, has audio signals for a timer.

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Description : What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Last Answer : A. Interference to adjacent channel

Which of the following is not a baseband signal modulation? A. RF carrier B. Video System C. Audio signal D. Binary coded pulses

Description : Which of the following is not a baseband signal modulation? A. RF carrier B. Video System C. Audio signal D. Binary coded pulses

Last Answer : A. RF carrier

What does a tone control circuit in a receiver do to the audio signal?

Description : What does a tone control circuit in a receiver do to the audio signal?

Last Answer : It controls the amount of bass and treble response.

What is the best way to send an HD signal from a camcorder to a television that's FAR away?

Description : What is the best way to send an HD signal from a camcorder to a television that's FAR away?

Last Answer : answer:This may sound dumb, but I’m just thinking out loud here. Why not set up an HD webcam on the pastor. Then you can have the TV in the back hooked up to a cheapie computer running whatever program (I prefer Skype) and just set it up like a chat? You can do that wirelessly.

How does a television signal differ from a standard radio waves?

Description : How does a television signal differ from a standard radio waves?

Last Answer : it operates at a much higher diffrence

A television channel is characterized by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Description : A television channel is characterized by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Last Answer : (1) frequency of transmitted signal Explanation: A television channel is a physical or virtual channel over which a television station or television network is distributed. Channel numbers represent actual frequencies used to ... .75 MHz for analog audio (FM), or 55.31 MHz for digital ATSC (8VSB).

What signal-to-noise ratio is required for satisfactory television reception? A. 10 dB B. 30 dB C. 40 dB D. 20 dB

Description : What signal-to-noise ratio is required for satisfactory television reception? A. 10 dB B. 30 dB C. 40 dB D. 20 dB

Last Answer : C. 40 dB

The signal to noise ratio that is required for a satisfactory television reception. A. 30 dB B. 40 dB C. 10 dB D. 20 dB

Description : The signal to noise ratio that is required for a satisfactory television reception. A. 30 dB B. 40 dB C. 10 dB D. 20 dB

Last Answer : B. 40 dB

An antenna that can only receive a television signal. A. Isotropic antenna B. TVRO C. Reference antenna D. Yagi antenna

Description : An antenna that can only receive a television signal. A. Isotropic antenna B. TVRO C. Reference antenna D. Yagi antenna

Last Answer : B. TVRO

The basic function of technology 'Blue tooth' is to allow a)Landline phone to mobile phone communication b)Signal transmission on mobile phones only c)Satellite television communication d)Wireless communication between equipment.

Description : The basic function of technology 'Blue tooth' is to allow a)Landline phone to mobile phone communication b)Signal transmission on mobile phones only c)Satellite television communication d)Wireless communication between equipment.

Last Answer : d)Wireless communication between equipment.

'Blue tooth' technology allows - 1) Landline phone to mobile phone communication 2) Signal transmission on mobile phones only 3) Wireless communication between equipments 4) Satellite television communication

Description : 'Blue tooth' technology allows - 1) Landline phone to mobile phone communication 2) Signal transmission on mobile phones only 3) Wireless communication between equipments 4) Satellite television communication

Last Answer : 3) Wireless communication between equipments

A television channel is characterised by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Description : A television channel is characterised by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Last Answer : frequency of transmitted signal

A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Last Answer : Answer : A

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSSC)FHSSD)TDM

Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : FHSS

Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Description : Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Last Answer : FDM

The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Description : The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Last Answer : PCM

Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Last Answer : PWM, PLM, PDM

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation