How many poles of a magnet ?

How many poles of a magnet ?
by

1 Answer

Answer :

: There are two poles of magnet 1) North pole 2) South pole.
by

Related questions

What does a magnet repel ?

Description : What does a magnet repel ?

Last Answer : Repel the homogeneous magnetic pole.

What is the material for making artificial magnet ?

Description : What is the material for making artificial magnet ?

Last Answer : Synthetic magnets are made by supplying electric current to the cast iron. That means cast iron , wire and current are needed to make artificial magnets .

What is a natural magnet ?

Description : What is a natural magnet ?

Last Answer : A magnet found in nature or in a mine is called a natural magnet. In the past, natural magnets were called loadstones

What is an artificial magnet ?

Description : What is an artificial magnet ?

Last Answer : Artificial magnets are magnets that are made in the laboratory using different magnets that are suitable for human work.

What is a permanent magnet ?

Description : What is a permanent magnet ?

Last Answer : Even if a magnet is removed from the magnetic field, the magnetism does not disappear, so a permanent magnet.

What is a temporary magnet ?

Description : What is a temporary magnet ?

Last Answer : : When a magnet is inserted into a field, it becomes a magnet .

What is the meaning of religion of magnet ?

Description : What is the meaning of religion of magnet ?

Last Answer : The poles of a magnet repel each other and the opposite poles attract each other. This is the religion of magnetism.

8. How does a solenoid behave like a magnet? Can you determine the north and south poles of a current–carrying solenoid with the help of a bar magnet? Explain. -Physics-10

Description : 8. How does a solenoid behave like a magnet? Can you determine the north and south poles of a current–carrying solenoid with the help of a bar magnet? Explain. -Physics-10

Last Answer : A solenoid is a long coil of circular loops of insulated copper wire. The magnetic field produced around the solenoid when the current is passed through it is similar to the magnetic field ... shows the arrangement of magnetic fields produced around the solenoid when current is passed through it.

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : The answer is '6'

A substance, when inserted between the poles of a magnet, is pushed out, what is it? -Do You Know?

Description : A substance, when inserted between the poles of a magnet, is pushed out, what is it? -Do You Know?

Last Answer : answer:

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : answer:

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : answer:

How many poles does a magnet have ?

Description : How many poles does a magnet have ?

Last Answer : 2 poles of magnet 1. North pole 2. South pole.

Is the attractive force of a magnet greatest at its poles?

Description : Is the attractive force of a magnet greatest at its poles?

Last Answer : Yes.

How will we find out the north pole and south pole of a bar magnet with no markings to indicate poles?

Description : How will we find out the north pole and south pole of a bar magnet with no markings to indicate poles?

Last Answer : If you roughly know where North is, tie the bar magnet to a piece of thin string so it balances horizontally and let it dangle. Once it stops spinning and waving about, one end should point North. Mark this end as with an N for north.

How can we find poles of an odd shaped magnet?

Description : How can we find poles of an odd shaped magnet?

Last Answer : What is the answer ?

How will we find out the north pole and south pole of a bar magnet with no markings to indicate poles?

Description : How will we find out the north pole and south pole of a bar magnet with no markings to indicate poles?

Last Answer : If you roughly know where North is, tie the bar magnet to a piece of thin string so it balances horizontally and let it dangle. Once it stops spinning and waving about, one end should point North. Mark this end as with an N for north.

If you are given some iron fillings and a magnet describe how you would find the poles of the magnet?

Description : If you are given some iron fillings and a magnet describe how you would find the poles of the magnet?

Last Answer : If possible cover the magnet with a sheet of paper and gentlysprinkle the iron filings over the sheet ot paper, they will stickin a pattern following the magnetic "lines of flux" which will ... . Without the paper thefilings will usually become tightly stuck to the magnet, making ithard to clean.

A substance, when inserted between the poles of a magnet, is pushed out, what is it?

Description : A substance, when inserted between the poles of a magnet, is pushed out, what is it?

Last Answer : Diamagnetic

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be?

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be?

Last Answer : 6

The dipole formation in a magnet is due to a) Interaction between the north and south poles together b) Interaction between the north pole with the air c) Interaction between the south pole with the air d) Interaction of north and south pole separately with air

Description : The dipole formation in a magnet is due to a) Interaction between the north and south poles together b) Interaction between the north pole with the air c) Interaction between the south pole with the air d) Interaction of north and south pole separately with air

Last Answer : a) Interaction between the north and south poles together

Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Description : Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Last Answer : South pole at the right, north pole at the left.

Magnetic lines of force have all but one of the following characteristics. The one that they DO NOT have is: w) they go from the South-pole to the North-pole of a magnet outside of the magnet x) they are most concentrated at the poles of a magnet y) they pass through copper z) they never cross one another

Description : Magnetic lines of force have all but one of the following characteristics. The one that they DO NOT have is: w) they go from the South-pole to the North-pole of a magnet outside of the magnet ... most concentrated at the poles of a magnet y) they pass through copper z) they never cross one another

Last Answer : ANSWER: W -- THEY GO FROM THE SOUTH-POLE TO THE NORTH-POLE OF THE M AGNET 

A permanent magnet stepper motor with 8 poles in stator and 6 poles in rotor will have a step angle of

Description : A permanent magnet stepper motor with 8 poles in stator and 6 poles in rotor will have a step angle of (a) 7.5° (b) 15° (c) 30° (d) 60°

Last Answer : d

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

What features should a switchgear have ?

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

What are the components of switch gear ?

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

What do you mean by switchgear ?

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

What is an Earth Electrode ?

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

What earthing is done in hilly areas ?

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

What should be the size of rod earthing ?

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

What does earth continuity mean ?

Description : What does earth continuity mean ?

Last Answer : The conduction wire that connects the earthing lead to the metal cover of electrical furniture, appliances, or wiring is called the earth continuity wire.

Which earthing is less expensive ?

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

What should be the size of the pipe electrode ?

Description : What should be the size of the pipe electrode ?

Last Answer : The size of the pipe electrode should be 36 mm diameter 2 to 2.75 m long galvanized iron or steel pipe.

How many types of earthing and what are they ?

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.