The - - - gate has one or more high inputs, produces high output

by

1 Answer

Answer :

The OR gate has one or more high inputs, produces high output

by

Related questions

In a NOR gate all inputs must be - - - to get high output

Last Answer :  In a NOR gate all inputs must be Low to get high output

A Gate is a logic circuit with one or more inputs, but only - - - output

Last Answer :  A Gate is a logic circuit with one or more inputs, but only One output

What will be found in the output if two inputs of Ex-OR gate are high ?

Description : What will be found in the output if two inputs of Ex-OR gate are high ?

Last Answer : If two inputs of Ex-OR gate are high then 0 will be found in the output .

A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

What will be the output of an X-OR gate when both inputs are HIGH?

Description : What will be the output of an X-OR gate when both inputs are HIGH?

Last Answer : Low (0)

What will be the output of a NOR gate when both inputs are HIGH?

Description : What will be the output of a NOR gate when both inputs are HIGH?

Last Answer : Low.

A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Description : A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Last Answer : . Low.

A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW? A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW?

Description : A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW?

Last Answer : HIGH.

The gate whose output is LOW, if and only if all the inputs are HIGH, is

Description : The gate whose output is LOW, if and only if all the inputs are HIGH, is

Last Answer : The gate whose output is LOW, if and only if all the inputs are HIGH, is NAND

The output of a 2-input NAND gate with high at both the inputs will be

Description : The output of a 2-input NAND gate with high at both the inputs will be • High • Low • High & low • None of the above.

Last Answer : The output of a 2-input NAND gate with high at both the inputs will be Low

The output of an AND gate with three inputs, A, B and C, is HIGH when________.

Description : The output of an AND gate with three inputs, A, B and C, is HIGH when __________. a) A=1,B=1,C=0 b) A= 0,B= 0,C= 0 ' c) A=1,B=1,C=1 d) A=1,B= 0,C= 1

Last Answer : Sahara theme port n a n d Gate if two input Array Logic 0 the output is dash

A gate in which all inputs must be low to get a high output is called

Last Answer : A gate in which all inputs must be low to get a high output is called A NOR gate.

For a NAND gate, when one or more inputs are low then the output will be

Description :  For a NAND gate, when one or more inputs are low then the output will be A) Low B) High C) Alternately high and low D) High or low depending on relative magnitude of inputs 

Last Answer :  For a NAND gate, when one or more inputs are low then the output will be High 

In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the same NOR and NAND inputs D. have output conditions that are exact opposites to the output condition for OR and AND, respectively

Description : In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the ... . have output conditions that are exact opposites to the output condition for OR and AND, respectively

Last Answer : Answer: D

. What will be the output of an X-NOR gate when both inputs are LOW?

Description : . What will be the output of an X-NOR gate when both inputs are LOW?

Last Answer : HIGH.

What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Description : What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Last Answer : AB

In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Description : In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Last Answer : All inputs must be low.

What is the output Boolean expression for a NOR gate with R and T as inputs?

Description : What is the output Boolean expression for a NOR gate with R and T as inputs?

Last Answer : (R +T)’

What is the output Boolean expression for a NAND gate with inputs A, B, and C?

Description : What is the output Boolean expression for a NAND gate with inputs A, B, and C?

Last Answer : C B A

What must be the state of the inputs to a NAND gate in order to produce a LOW output?

Description : What must be the state of the inputs to a NAND gate in order to produce a LOW output?

Last Answer : All inputs must be HIGH.

What is the Boolean expression for the output of an AND gate that has R and S as inputs?

Description : What is the Boolean expression for the output of an AND gate that has R and S as inputs?

Last Answer : f = RS.

The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Description : The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Last Answer : (b) Both are zero

The NOR gate output will be low if the two inputs are (A) 00 (B) 01 (C) 10 (D) 11

Description : The NOR gate output will be low if the two inputs are (A) 00 (B) 01 (C) 10 (D) 11

Last Answer : A

The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either (A) a NAND or an EX-OR (B) an OR or an EX-NOR (C) an AND or an EX-OR (D) a NOR or an EX-NOR

Description : The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either (A) a NAND or an EX-OR (B) an OR or an EX-NOR (C) an AND or an EX-OR (D) a NOR or an EX-NOR

Last Answer : (D) a NOR or an EX-NOR

The NAND gate output will be low if the two inputs are (A) 00 (B) 01 (C) 10 (D) 11

Description : The NAND gate output will be low if the two inputs are (A) 00 (B) 01 (C) 10 (D) 11

Last Answer : (D) 11

Output of NAND gate is 0. for three inputs when:

Description : Output of NAND gate is 0. for three inputs when:

Last Answer : Output of NAND gate is 0. for three inputs when: all the inputs are 1

The output of logic gate is '1' when all its inputs are at logic '0' The gate is

Description : The output of logic gate is '1' when all its inputs are at logic '0' The gate is (A) NAND/EX-OR (B) NOR/EX-OR (C) AND/EX-NOR (D) NOR/EX-NOR

Last Answer : The answer is (D) If we take two input A and B, and corresponding output Y then for nor gate Y = complement of (A+B)  ;for ex-nor gate Y= A.B + complement of(A.B) The above two relation showing always Y =1 for A=0,B=0.

What is the number of rows of a logical gate with three inputs ?

Description : What is the number of rows of a logical gate with three inputs ?

Last Answer : There are 8 rows of logical gates with three inputs .

How many inputs and how many outputs of NOT gate ?

Description : How many inputs and how many outputs of NOT gate ?

Last Answer : NOT Gate has one input and one output.

What is the equivalent logic gate of a two-input NAND gate with both inputs inverted?

Description : What is the equivalent logic gate of a two-input NAND gate with both inputs inverted?

Last Answer : OR gate.

In case of OR gate, no matter what the number of inputs, a

Last Answer :  In case of OR gate, no matter what the number of inputs, a 1 at any input causes the output to be at logic 1.

An OR gate has 6 inputs. The number of input words in its truth table are

Last Answer : An OR gate has 6 inputs. The number of input words in its truth table are 64.

In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Description : In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Last Answer : ANSWER: Y -- AN OR CIRCUIT

Consider the following statements (A–D) about organic farming. (A) Utilizes genetically modified crops like Bt cotton (B) Uses only naturally produced inputs like compost (C) Does not use pesticides and urea (D) Produces vegetables rich in vitamins and minerals Which of the above statements are correct? (a) B, C and D (b) C and D only (c) B and C only (d) A and B only

Description : Consider the following statements (A-D) about organic farming. (A) Utilizes genetically modified crops like Bt cotton (B) Uses only naturally produced inputs like compost (C) Does not use pesticides and urea (D) Produces vegetables ... C and D (b) C and D only (c) B and C only (d) A and B only

Last Answer : (c) B and C only

Two sinusoidal signals having the same amplitude and frequency are applied to the X and Y inputs of a CRO.

Description : Two sinusoidal signals having the same amplitude and frequency are applied to the X and Y inputs of a CRO. The observed Lissajous figure is straight line. The phase shift between the two signals would be (1) Zero (2) 90 degrees (3) Either zero or 180 degrees (4) Either 90 degrees or 270 degrees  

Last Answer : Two sinusoidal signals having the same amplitude and frequency are applied to the X and Y inputs of a CRO. The observed Lissajous figure is straight line. The phase shift between the two signals would be (1) Zero (2) 90 degrees (3) Either zero or 180 degrees (4) Either 90 degrees or 270 degrees  

_____ refers to the combination of one or more inputs to produce a particular output a. Solution b. Variable c. Process d. None of the above

Description : _____ refers to the combination of one or more inputs to produce a particular output a. Solution b. Variable c. Process d. None of the above

Last Answer : c. Process

A NAND gate is equivalent to an - - - gate followed by an inverter

Last Answer : A NAND gate is equivalent to an AND gate followed by an inverter.

can we turn off thyristor using Gate?

Last Answer : No we cannot turn off normal thyristor using Gate.

Field Programmable Gate Array (FPGA)

Description : Field Programmable Gate Array (FPGA)

Last Answer : Field Programmable Gate Array (FPGA) FPGA is field programmable gate array. FPGA are PLDs which are made from interconnected small macro cells. It is made from logic cells. Logic ... . Volatile. Large number of pins. Slow design software. Don't provide fix delay.

A line represents the different combinations of two variable inputs used in the production of a given amount of output.

Description : A line represents the different combinations of two variable inputs used in the production of a given amount of output.

Last Answer : Ans. Isoquant

If a change in all inputs leads to a proportionate change in output, it is case of - (1) Constant returns to scale (2) Diminishing returns to scale (3) Increasing returns to scale (4) Variable returns to scale

Description : If a change in all inputs leads to a proportionate change in output, it is case of - (1) Constant returns to scale (2) Diminishing returns to scale (3) Increasing returns to scale (4) Variable returns to scale

Last Answer : (1) Constant returns to scale Explanation: If output increases by that same proportional change as all inputs change then there are constant returns to scale (CRS). If output increases by less than ... by more than that proportional change in inputs, there are increasing returns to scale (IRS).

Production function explains the relationship between - (1) initial inputs and ultimate output (2) inputs and ultimate consumption (3) output and consumption (4) output and exports

Description : Production function explains the relationship between - (1) initial inputs and ultimate output (2) inputs and ultimate consumption (3) output and consumption (4) output and exports

Last Answer : (1) initial inputs and ultimate output Explanation: Production function explains the relationship between factor input and output under given technology. It explains as to for increasing the ... . Production function explains the physical relationship between input and output under given technology.

Production function expresses - (1) technological relationship between physical inputs and output (2) financial relationship between physical inputs and output (3) relationship between finance and technology (4) relationship between factors of production

Description : Production function expresses - (1) technological relationship between physical inputs and output (2) financial relationship between physical inputs and output (3) relationship between finance and technology (4) relationship between factors of production

Last Answer : (1) technological relationship between physical inputs and output Explanation: Production involves transformation of inputs into outputs. The output is a function of input. The functional relationship between ... be produced from any given quantities of various inputs during a given period of time.

Production function relates - (1) Cost to output (2) Cost to input (3) Wages to profit (4) Inputs to output

Description : Production function relates - (1) Cost to output (2) Cost to input (3) Wages to profit (4) Inputs to output

Last Answer : (4) Inputs to output Explanation: Production function specifies the output of a firm, an industry, or an entire economy for all combinations of inputs. The relationship of output to inputs is ... relates physical inputs to physical outputs, and prices and costs are not reflected in the function.

One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all inputs and test for a logic '1' at the output C. open all inputs and test for a logic '0' at the output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Description : One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all ... output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Last Answer : Answer: A

One feature of the operational amplifier is that it can have ____________. A. up to ten outputs B. binary coded decimal inputs C. several hundred amps at the output D. inverting and non-inverting inputs

Description : One feature of the operational amplifier is that it can have ____________. A. up to ten outputs B. binary coded decimal inputs C. several hundred amps at the output D. inverting and non-inverting inputs

Last Answer : Answer: D

A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0. a) True b) False c) Sometimes – it can also output intermediate values as well d) Can’t say

Description : A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0. a) True b) False c) Sometimes – it can also output intermediate values as well d) Can’t say

Last Answer : a) True

. In an Unsupervised learning ____________ a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given

Description : . In an Unsupervised learning ____________ a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given

Last Answer : b) Specific output values are not given

Correct objectives of energy audit a) Identifying the quality and cost of various energy inputs. b) Relating energy inputs and production output c) Highlighting wastage in major areas. d) All of the above.

Description : Correct objectives of energy audit a) Identifying the quality and cost of various energy inputs. b) Relating energy inputs and production output c) Highlighting wastage in major areas. d) All of the above.

Last Answer : All of the above

For an R-S FF to change output conditions, the inputs must be in what states?

Description : For an R-S FF to change output conditions, the inputs must be in what states?

Last Answer : 1 and 0, or opposite states.