What are the benefits of using digital signals ?

Question

What are the benefits of using digital signals ?

asked Jan 27, 2022 by anonymous

1 Answer

Answer :

Advantages of digital system 1. The design of the circuit can be easily formulated as the calculation of signals is easy in digital systems. 2. The output in digital systems is extremely fine and noise free. 3. Different logic families or integrated circuits can be used to design a circuit in a digital system so that the circuit is smaller in size and cheaper. 4. Signal noise is less affected in the circuit of digital systems. And even if noise is affected, it is easier to detect noise as there are two recognized mice 1 and 0 . 5. Digitally a large amount of data can be stored in flash memory.

answered Jan 27, 2022 by anonymous

Related questions

What are the benefits of digital meter ?

Description : What are the benefits of digital meter ?

Last Answer : The advantages of digital meter are- 1. There is less chance of error in meter reading. 2. It takes less time to take readings. 3. Skilled people are not needed. 4. Its power consumption is low. 5. Success in creating digital instruments is almost 100%.

What are the benefits of using energy bulbs ?

Description : What are the benefits of using energy bulbs ?

Last Answer : There are several benefits to using energy saving bulbs. And they are: The light of this bulb is like the light of a tube light. In the case of ordinary tube lights , if there is a problem ... as a result of using lamps. The remaining 95 percent of the electricity is used to raise the temperature.

What is Digital Device ?

Description : What is Digital Device ?

Last Answer : Device means equipment. A device made with a digital circuit is called a digital device. Digital logic gates are built according to Boolean algebra rules. Digital circuits are made with different digital logic ... file is called a digital device. Such as- encoder , decoder , adder , register etc.

What does digital signal mean ?

Description : What does digital signal mean ?

Last Answer : A digital signal means that the signal or symbol has two defined levels.

What is meant by digital electronics ?

Description : What is meant by digital electronics ?

Last Answer : A signal or symbol that has two defined layers , no unknown state, and whose layers change step by step over time and have specific steps , is called digital electronics.

What is meant by Logic Level of Digital Signal ?

Description : What is meant by Logic Level of Digital Signal ?

Last Answer : The voltage used to indicate binary '1' and '0' is called logic level.

What are the characteristics of digital signal ?

Description : What are the characteristics of digital signal ?

Last Answer : There are two main features of digital signal. 1. This signal changes suddenly from one state to another. 2. Low and high level values are fixed.

What type of signal is used in digital electronics ?

Description : What type of signal is used in digital electronics ?

Last Answer : Digital signals are used in digital electronics , the level and value of which are determined.

What is meant by pulse rate or frequency of digital signal ?

Description : What is meant by pulse rate or frequency of digital signal ?

Last Answer : The number of vibrations per second in a signal is called Pulse rate .

What is meant by Digital Cycle Duty Cycle ?

Description : What is meant by Digital Cycle Duty Cycle ?

Last Answer : Duty Cycle = Vibration / Period X 100% . For example , if tw = T / 2 , Duty cycle = 50% .

What is digital signal ?

Description : What is digital signal ?

Last Answer : A signal whose value changes step by step over time is called a digital signal. This is often called a discrete-time signal. The value of any moment of the digital signal is at a certain step / state. Digital signals are processed through circuits like Eder , Subtractor , Multiplexer , Register etc.

What is a digital energy meter ?

Description : What is a digital energy meter ?

Last Answer : The energy meters on which the display is calculated are called digital energy meters.

What are the benefits of laptop or notebook ?

Description : What are the benefits of laptop or notebook ?

Last Answer : Laptops or notebooks have more advantages than desktops. So now it is gaining more popularity. Easy portability: Laptops or notebooks are light in weight and can be easily carried to different places. At ... touchscreens , webcams , network cards , WiFi, etc. Which gives many benefits to the users.

What is the color before using silica gel ?

Description : What is the color before using silica gel ?

Last Answer : Silica gel is brown or light in color before application.

Write using photo diode ?

Description : Write using photo diode ?

Last Answer : : Use of photo diode (a) to operate the relay circuit , ( b) to read the punch card of the computer fast , ( c) to automatically control the angle system , ( d) to determine the number ... , ( F) are used for controlling photoelectric resistors , ( g) are used for voltage and heat control systems.

What are the disadvantages of using energy bulbs ?

Description : What are the disadvantages of using energy bulbs ?

Last Answer : : For those who suffer from headaches , migraines or epilepsy, using a compact fluorescent lamp at home can cause some physical problems. If left in the light for a long time, the migraine patient ... a system to recycle damaged bulbs, such a system has not been developed in our country till date.

What is the reason for using circuit breaker in circuit ?

Description : What is the reason for using circuit breaker in circuit ?

Last Answer : Circuit breakers are used for safety.

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

What features should a switchgear have ?

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

What are the components of switch gear ?

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

What do you mean by switchgear ?

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

What is an Earth Electrode ?

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

What earthing is done in hilly areas ?

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

What should be the size of rod earthing ?

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

What does earth continuity mean ?

Description : What does earth continuity mean ?

Last Answer : The conduction wire that connects the earthing lead to the metal cover of electrical furniture, appliances, or wiring is called the earth continuity wire.

Which earthing is less expensive ?

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

What should be the size of the pipe electrode ?

Description : What should be the size of the pipe electrode ?

Last Answer : The size of the pipe electrode should be 36 mm diameter 2 to 2.75 m long galvanized iron or steel pipe.

How many types of earthing and what are they ?

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

What are the essential elements for earthing ?

Description : What are the essential elements for earthing ?

Last Answer : They are _ a) earthen continuity b) earthing lead c) earthy electrode

What is the best earthing method ?

Description : What is the best earthing method ?

Last Answer : Pipe earthing method is best. This is because it is less expensive and when the soil dries out in the dry season , regular earthing can be done by pouring water through the pipes.

What is Neutral Plan ?

Description : What is Neutral Plan ?

Last Answer : A plane at infinite distance , where the value of electric field intensity and potential V is zero , is called Neautral Plan .

On what subject does inductance in transmission line depend ?

Description : On what subject does inductance in transmission line depend ?

Last Answer : a) On the line b) Conductor spacing c) Conductor radius

What does GMD & GMR mean ?

Description : What does GMD & GMR mean ?

Last Answer : GMD = Geometrical Mean Distance GMR = Geometrical Mean Radiue.

What is the best economic pf ?

Description : What is the best economic pf ?

Last Answer : Improving the power factor means maximum annual savings , which is called the best economic power factor.