What equipment is required to set up a computer network ?

What equipment is required to set up a computer network ?
by

1 Answer

Answer :

The equipment required to set up a computer network is given below: 1. Network Interface Card ( Network Interface Card) 2. Modem ( Modem) 3. HUB 4 . Switch 5 . Router 7 . Gateway 6 . Repeater 6 . Bridge etc. _
by

Related questions

Computer software can be defined as-- 1) the computer and its associated equipment 2) the instructions that tell the computer what to do 3) computer components that act to accomplish a goal 4) an interface between the computer and the network

Description : Computer software can be defined as-- 1) the computer and its associated equipment 2) the instructions that tell the computer what to do 3) computer components that act to accomplish a goal 4) an interface between the computer and the network

Last Answer : 2) the instructions that tell the computer what to do

Computer software can be defined as-- 1 the computer and its associated equipment 2 the instructions that tell the computer what to do 3 computer components that act to accomplish a goal 4 an interface between the computer and the network

Description : Computer software can be defined as-- 1 the computer and its associated equipment 2 the instructions that tell the computer what to do 3 computer components that act to accomplish a goal 4 an interface between the computer and the network

Last Answer : 2 the instructions that tell the computer what to do

Pickup wrong definition 1) Off line - is a system peripheral equipment not controlled by CPU 2) Online - is system in which peripheral equipment is in direct contact with CPU 3) PL/I is the acronym Peripheral Listing /Index 4) Program or routine is a set sequence of instructions given to computer for problem solving

Description : Pickup wrong definition 1) Off line - is a system peripheral equipment not controlled by CPU 2) Online - is system in which peripheral equipment is in direct contact with CPU 3) PL/I is the ... /Index 4) Program or routine is a set sequence of instructions given to computer for problem solving

Last Answer : 3) PL/I is the acronym Peripheral Listing /Index

Nortel is a company into manufactures --- 1) Software 2) Processors 3) Cables 4) Network equipment

Description : Nortel is a company into manufactures --- 1) Software 2) Processors 3) Cables 4) Network equipment

Last Answer : 4) Network equipment

Which of the following is not referred to as data terminal equipment? A. Telephone set B. Printers C. Modem D. Computer

Description : Which of the following is not referred to as data terminal equipment? A. Telephone set B. Printers C. Modem D. Computer

Last Answer : C. Modem

A firewall is a network security system ______based that controls incoming and outgoing network traffic based on a set of rules: a) Hardware b) Software c) Both hardware or software d) None of These

Description : A firewall is a network security system ______based that controls incoming and outgoing network traffic based on a set of rules: a) Hardware b) Software c) Both hardware or software d) None of These

Last Answer : c) Both hardware or software

Which of the following are true about firewalls? 1) Filters network traffic 2) Can be either a hardware or software device 3) Follows a set of rules 4) All the above

Description : Which of the following are true about firewalls? 1) Filters network traffic 2) Can be either a hardware or software device 3) Follows a set of rules 4) All the above

Last Answer : 4) All the above

Which of the following are true about firewalls? 1 Filters network traffic 2 Can be either a hardware or software device 3 Follows a set of rules 4 All the above

Description : Which of the following are true about firewalls? 1 Filters network traffic 2 Can be either a hardware or software device 3 Follows a set of rules 4 All the above

Last Answer : 4 All the above

Personnel who design, program, operates and maintains computer equipment refers to A) Console-operator B) Programmer C) Peopleware D) System Analyst

Description : Personnel who design, program, operates and maintains computer equipment refers to A) Console-operator B) Programmer C) Peopleware D) System Analyst

Last Answer : Answer : C

The general term 'peripheral equipment' is used for - 1) any device that is attached to a computer system 2) large scale computer systems 3) a program collection 4) other office Equipment not associated with a desktop Computer

Description : The general term 'peripheral equipment' is used for - 1) any device that is attached to a computer system 2) large scale computer systems 3) a program collection 4) other office Equipment not associated with a desktop Computer

Last Answer : 1) any device that is attached to a computer system

What is the initial minimum paid-up equity capital required for new on-tap license to set up private bank as announced by RBI? A) Rs 5 crore B) Rs 100 crore C) Rs 500 crore D) Rs 50 crore E) Rs 200 crore

Description : What is the initial minimum paid-up equity capital required for new on-tap license to set up private bank as announced by RBI? A) Rs 5 crore B) Rs 100 crore C) Rs 500 crore D) Rs 50 crore E) Rs 200 crore

Last Answer : C) Rs 500 crore Explanation: The Reserve Bank of India released norms for on-tap permits for private sector banks and said the validity of the in-principle approval issued by the RBI will be 18 months from the date of granting in-principle approval.

What determines the future IT infrastructure requirements for new equipment and additional network capacity? a. Flexibility b. Performance c. Capacity planning d. Benchmark

Description : What determines the future IT infrastructure requirements for new equipment and additional network capacity? a. Flexibility b. Performance c. Capacity planning d. Benchmark

Last Answer : c. Capacity planning

How to Easily Set Up Table Tennis Equipment?

Description : How to Easily Set Up Table Tennis Equipment?

Last Answer : Table Tennis, also known as Ping Pong, is a popular racquet sport that is commonly played in most game rooms. Despite the similar names, Table tennis is quite different than tennis. The equipment used ... It is recommended to have a few feet of clearance space behind the table and along the sides.

What equipment do I need to set up a photography studio?

Description : What equipment do I need to set up a photography studio?

Last Answer : Lights are the next most important thing but you need more than that. Gels and backdrops are really important too.

What are the raw material machinery tools and equipment required for the production Coffee shop?

Description : What are the raw material machinery tools and equipment required for the production Coffee shop?

Last Answer : Need answer

What safety precautions are required when transporting oxygen concentrator equipment?

Description : What safety precautions are required when transporting oxygen concentrator equipment?

Last Answer : An oxygen concentrator takes oxygen from the air we all breathe and concentrates it. Unlike a tank of concentrated oxygen it has little risk of causing an explosion or a fire. In fact oxygen concentrators are the preferred system for rescue personell because there is far less danger to the operator.

What equipment is required for massage therapy training?

Description : What equipment is required for massage therapy training?

Last Answer : No, most of these classes provide them for students to practice with. You don't typically have to invest in equipment.

Cooling water is required for following equipment in ammonia absorption plant (a) condenser (b) evaporator (c) condenser and absorber (d) condenser, absorber and separator (rectifier).

Description : Cooling water is required for following equipment in ammonia absorption plant (a) condenser (b) evaporator (c) condenser and absorber (d) condenser, absorber and separator (rectifier).

Last Answer : Ans: d

Compressed air should not be used to clean motor controller equipment because ________________. A. it may force metallic particles into coil insulation B. the surrounding area may need additional cleaning C. the air blast dries out insulation quickly D. a mask and respirator would be required

Description : Compressed air should not be used to clean motor controller equipment because ________________. A. it may force metallic particles into coil insulation B. the surrounding area may need additional cleaning C. the air blast dries out insulation quickly D. a mask and respirator would be required

Last Answer : Answer: A

Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Description : Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Description : What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Last Answer : Special-purpose electronic test equipment.

Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Description : Which of the following would not be required to be checked before welding? a) The welding consumables b) The welder qualification c) Calibration of the welding equipment d) The workshop humidity

Last Answer : d) The workshop humidity

What is required for navigation in IMC? a. Radio equipment and equipment for guidance until visual point b. Anti-icing equipment c. A serviceable weather radar d. One VHF box and one HF box

Description : What is required for navigation in IMC? a. Radio equipment and equipment for guidance until visual point b. Anti-icing equipment c. A serviceable weather radar d. One VHF box and one HF box

Last Answer : a. Radio equipment and equipment for guidance until visual point

ECE Board Exam March 1996 Modems are required to connect computer to telephone lines because ___________. A. telephone company rules required them B. the telephone network bandwidth is too high C. none of the above D. the telephone network will pass direct current

Description : ECE Board Exam March 1996 Modems are required to connect computer to telephone lines because ___________. A. telephone company rules required them B. the telephone network bandwidth is too high C. none of the above D. the telephone network will pass direct current

Last Answer : D. the telephone network will pass direct current

The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

When troubleshooting electronic equipment, the FIRST step to be taken before testing the circuit voltage is to _________. A. set the meter to the lowest range B. check the voltage supply from the power source C. remove the suspected component D. check the current flow through the circuit

Description : When troubleshooting electronic equipment, the FIRST step to be taken before testing the circuit voltage is to _________. A. set the meter to the lowest range B. check the voltage supply from the power source C. remove the suspected component D. check the current flow through the circuit

Last Answer : Answer: B

An earth moving equipment costs Rs. 5,00,000 and has an estimated life of 10 years and a salvage value of Rs. 50,000. What uniform annual amount must be set aside at the end of each of the 10 years for replacement if the interest rate is 8% per annum and if the sinking fund factor at 8% per annum interest rate for 10 years is 0.069? (A) Rs. 31050 (B) Rs. 34500 (C) Rs. 37950 (D) Rs. 5000

Description : An earth moving equipment costs Rs. 5,00,000 and has an estimated life of 10 years and a salvage value of Rs. 50,000. What uniform annual amount must be set aside at the end of each of the 10 years for replacement if ... years is 0.069? (A) Rs. 31050 (B) Rs. 34500 (C) Rs. 37950 (D) Rs. 5000

Last Answer : (A) Rs. 31050

A set of Bose car speakers sold to Mazda for use in the production of an RX-7 would be an example of A)a component part. B)a specialty item. C)accessory equipment. D)raw material.

Description : A set of Bose car speakers sold to Mazda for use in the production of an RX-7 would be an example of A)a component part. B)a specialty item. C)accessory equipment. D)raw material.

Last Answer : A)a component part.

How do I set a password on a computer on my home network?

Description : How do I set a password on a computer on my home network?

Last Answer : What OS on the PC?

Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same destination can take different routes in the network c. IP ensures that a packet is discarded if it is unable to reach its destination within a given number of hops d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way