In an R-C-L series circuit, during resonance, the impedance will be _____.

by

1 Answer

Answer :

In an R-C-L series circuit, during resonance, the impedance will be minimum.

by

Related questions

Draw series R-L-C circuit and describe resonance.

Description : Draw series R-L-C circuit and describe resonance. 

Last Answer : Series R-L-C circuit:  Explanation of Series R-L-C Resonance circuit: A series circuit containing resistance, inductance and capacitance, is said to be resonant when the circuit power ... , and as we are analyzing a series RLC circuit this resonance frequency produces a Series Resonance.

In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Description : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Last Answer : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of L or C.

In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table-1",,"Table-2"),(,(A),"If " omegagtome

Description : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table-1",,"Table-2"),(,(A),"If " omegagtome

Last Answer : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table ... are in phase"),(,,,(T),"None"):}`

State condition for resonance in R-L-C series circuit.

Description : State condition for resonance in R-L-C series circuit.

Last Answer : The condition for resonance in R-L-C series circuit. i) Inductive Reactance should be equal to capacitive reactance. That is XL = XC ii) The power factor of the circuit is Cos ɸ = 1 iii)The voltage and ... and given by I =V/R. v)Impedance of the circuit is minimum and given by Z =R.

The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Description : The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Last Answer : Answer: C

The series and parallel resonance on L-C circuit differs in that?

Description : The series and parallel resonance on L-C circuit differs in that?

Last Answer : The series and parallel resonance on L-C circuit differs in that series resistance needs a low-resistance source for sharp rise in current.

Magnitude of current at resonance in R-L-C circuit?

Description : Magnitude of current at resonance in R-L-C circuit?

Last Answer : The current will be maximum if it is a series rlc circuit.

The power factor at resonance in R-L- C parallel circuit is?

Description : The power factor at resonance in R-L- C parallel circuit is?

Last Answer : since a rlc circuit at resonance behaves like a pure resistive circuit, i.e there is no phase difference between current and voltage, hence the power factor is unity.

Draw a circuit diagram of R.C. series circuit. Draw impedance triangle and power triangle for same circuit.

Description : Draw a circuit diagram of R.C. series circuit. Draw impedance triangle and power triangle for same circuit. 

Last Answer : Draw a circuit diagram of R.C. series circuit. Draw impedance triangle and power triangle for same circuit. 

Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Description : Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Last Answer : S. No . Parameter Series Circuit Parallel Circuit 1 Resonating frequency 2 Impedance Minimum, Z = R Maximum, Z = L/CR 3 Current Maximum, I ... , I = V/(L/CR)  4 Magnification Voltage magnification takes place Current magnification takes place

Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is

Description : Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is minimum B) During parallel resonance current is magnified C) During series resonance current at resonance is maximum D) During series as well as parallel resonance, the power factor is unity

Last Answer : Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is minimum B) During parallel resonance current is magnified C) During series resonance current at resonance is maximum D) During series as well as parallel resonance, the power factor is unity

What type of impedance does the tank circuit have above resonance?

Description : What type of impedance does the tank circuit have above resonance?

Last Answer : Inductive.

In an RLC parallel circuit, the impedance at resonance is

Last Answer : In an RLC parallel circuit, the impedance at resonance is Maximum.

Write equation of resultant impedance in R-L circuit.

Description : Write equation of resultant impedance in R-L circuit. 

Last Answer : The equation of resultant impedance in R-L circuit

The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Description : The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Last Answer : Answer: C

Consider the following statements with respect to a high Q, series RLC circuit under resonance

Description : Consider the following statements with respect to a high Q, series RLC circuit under resonance 1. The voltage across R is equal to the applied voltage 2. The voltage across L and C are zero 3 ... in magnitude 4. The voltage accross L and C are maximum Which of these statements are correct?

Last Answer : Consider the following statements with respect to a high Q, series RLC circuit under resonance 1. The voltage across R is equal to the applied voltage 2. The voltage across L and C are zero 3. ... The voltage accross L and C are maximum Which of these statements are correct? 1,3 and 4

in Series LCR circuit, at resonance:

Description : in Series LCR circuit, at resonance:  (1) Current is maximum and power factor is zero (2) Current is maximum and power factor is unity (3) Current is minimum and power factor is unity (4) None of these

Last Answer : in Series LCR circuit, at resonance: Current is maximum and power factor is unity.

A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively?

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series ...

Description : A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series circuit, just after the switch is closed, is equal to (1) Zero (2) V/L (3) V/C (4) V.L/C 

Last Answer : When is a series RLC circuit is over damped

The angle of a series R-L-C circuit is leading if _________.

Last Answer : The angle of a series R-L-C circuit is leading if Xc > XL

In a R-L series circuit the power factor P.F. is _________.

Last Answer : In a R-L series circuit the power factor P.F. is Leading.

If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to

Description :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when A) ZL = R B) ZL = jXS C) ZL = R-jXS D) ZL = R+jXS 

Last Answer :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when ZL = R-jXS

Draw impedance triangle and voltage triangle for RL series circuit

Description : Draw impedance triangle and voltage triangle for RL series circuit

Last Answer : impedance triangle and voltage triangle for RL series circuit

In a series resonant circuit, the impedance of the circuit is?

Description : In a series resonant circuit, the impedance of the circuit is?

Last Answer : In a series resonant circuit, the impedance of the circuit is minimum.

What is resonance in series circuit?

Description : What is resonance in series circuit?

Last Answer : If in an AC circuit inductive reactance XL and capacitive reactance XC is equal the voltage across both will be equal and are 180° out of phase. So that each will cancel each other and the current ... resonant frequency and the resonant frequency (FR) is equal to (FR) = 1/2π√LC cycles per second.

An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

Calculate the characteristics impedance for a transmission line having L=0.5 mH/Km, C=0.08 µF and negligible R and G.

Description : Calculate the characteristics impedance for a transmission line having L=0.5 mH/Km, C=0.08 µF and negligible R and G.

Last Answer : L=0.5 mH/Km C=0.08 µF

The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Description : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Last Answer : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

When an AC voltage, of variable frequency is applied to series L-C-R circuit, the current in the cirucit is the same at 4kHz. The current in the cirui

Description : When an AC voltage, of variable frequency is applied to series L-C-R circuit, the current in the cirucit is the same at 4kHz. The current in the cirui

Last Answer : When an AC voltage, of variable frequency is applied to series L-C-R circuit, the current in the cirucit ... is maximum at (x)kHz. Find the value of x

An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and angular frequency `300rad//s`. When only the capacit

Description : An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and angular frequency `300rad//s`. When only the capacit

Last Answer : An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and ... and the power dissipated in the `L-C-R` circuit

In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Description : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Last Answer : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L) ... (2) A` C. `20sqrt(2) A` D. `25sqrt(2) A`

Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Description : Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Last Answer : d) 0.5

Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-L series circuit, draw phasor diagram.

Description : Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-L series circuit, draw phasor diagram.

Last Answer : Practical Significance In the industry environment Electrical Engineering diploma graduate are expected to measure basic parameters like voltage, frequency, time period etc. for R-L series circuits. Therefore ... /varying L. 7. Draw the phasor diagram for each of reading for verification.

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = _:

Description : A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = _:  (1) Zero (2) Infinity (3) L/R (4) R/L 

Last Answer : A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = Zero.

A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C...

Description : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is:  (1) 25 (2) 50 (3) 100 (4) 200

Last Answer : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: 200.

In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Description : In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Last Answer : Nonresonant (circuit is either above or below resonance)

What is the difference between calculating impedance in a series ac circuit and in a parallel ac circuit?

Description : What is the difference between calculating impedance in a series ac circuit and in a parallel ac circuit?

Last Answer : In a series circuit impedance is calculated from the values of resistance and reactance. In a parallel circuit, the values of resistive current and reactive current must be used to calculate total impedance.

At series resonance,

Description : At series resonance, (A) Circuit impedance is maximum (B) Circuit current is minimum (C) Voltage across L or C is zero (D) Power factor is unity

Last Answer : At series resonance, Power factor is unity

A parallel AC. circuit in resonance will?

Description : A parallel AC. circuit in resonance will?

Last Answer : A parallel AC. circuit in resonance will have a high impedance.

The purpose of a parallel circuit resonance is to magnify?

Description : The purpose of a parallel circuit resonance is to magnify?

Last Answer : The purpose of a parallel circuit resonance is to magnify voltage.

What does it mean when an RLC circuit is at resonance?

Last Answer : When the total impendance equals  supply frequency.

In a series resonant circuit, maximum voltage across L occurs at

Description : In a series resonant circuit, maximum voltage across L occurs at  (a) Resonant frequency (b) Slightly below resonant frequency (c) Slightly above resonant frequency (d) At a frequency where I is maximum

Last Answer : In a series resonant circuit, maximum voltage across L occurs at Slightly above resonant frequency

In a series L-C circuit at the resonant frequency the?

Description : In a series L-C circuit at the resonant frequency the?

Last Answer : In a series L-C circuit at the resonant frequency the current is maximum.

In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied

Description : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is (A) 70 V (B) 50 V (C) 60 V (D) 100 V

Last Answer : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is 50 V

At ______ frequencies the parallel R-L circuit behaves as purely resistive.

Description : At ______ frequencies the parallel R-L circuit behaves as purely resistive.

Last Answer : At very high frequencies the parallel R-L circuit behaves as purely resistive.

In a R-L-C circuit?

Description : In a R-L-C circuit?

Last Answer : In a R-L-C circuit power is consumed in resistance and is equal to I R, exchange of power takes place between inductor and supply line, exchange of power takes place between capacitor and supply line, exchange of power does not take place between resistance and the supply line.