The angle of a series R-L-C circuit is leading if _________.

by

1 Answer

Answer :

The angle of a series R-L-C circuit is leading if Xc > XL

by

Related questions

In a R-L series circuit the power factor P.F. is _________.

Last Answer : In a R-L series circuit the power factor P.F. is Leading.

Draw series R-L-C circuit and describe resonance.

Description : Draw series R-L-C circuit and describe resonance. 

Last Answer : Series R-L-C circuit:  Explanation of Series R-L-C Resonance circuit: A series circuit containing resistance, inductance and capacitance, is said to be resonant when the circuit power ... , and as we are analyzing a series RLC circuit this resonance frequency produces a Series Resonance.

A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively?

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series ...

Description : A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series circuit, just after the switch is closed, is equal to (1) Zero (2) V/L (3) V/C (4) V.L/C 

Last Answer : When is a series RLC circuit is over damped

In an R-C-L series circuit, during resonance, the impedance will be _____.

Last Answer : In an R-C-L series circuit, during resonance, the impedance will be minimum.

If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Description : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

Last Answer : In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of L or C.

When an AC voltage, of variable frequency is applied to series L-C-R circuit, the current in the cirucit is the same at 4kHz. The current in the cirui

Description : When an AC voltage, of variable frequency is applied to series L-C-R circuit, the current in the cirucit is the same at 4kHz. The current in the cirui

Last Answer : When an AC voltage, of variable frequency is applied to series L-C-R circuit, the current in the cirucit ... is maximum at (x)kHz. Find the value of x

In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table-1",,"Table-2"),(,(A),"If " omegagtome

Description : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table-1",,"Table-2"),(,(A),"If " omegagtome

Last Answer : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table ... are in phase"),(,,,(T),"None"):}`

An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and angular frequency `300rad//s`. When only the capacit

Description : An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and angular frequency `300rad//s`. When only the capacit

Last Answer : An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and ... and the power dissipated in the `L-C-R` circuit

In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Description : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Last Answer : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L) ... (2) A` C. `20sqrt(2) A` D. `25sqrt(2) A`

Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Description : Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Last Answer : d) 0.5

State condition for resonance in R-L-C series circuit.

Description : State condition for resonance in R-L-C series circuit.

Last Answer : The condition for resonance in R-L-C series circuit. i) Inductive Reactance should be equal to capacitive reactance. That is XL = XC ii) The power factor of the circuit is Cos ɸ = 1 iii)The voltage and ... and given by I =V/R. v)Impedance of the circuit is minimum and given by Z =R.

Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-L series circuit, draw phasor diagram.

Description : Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-L series circuit, draw phasor diagram.

Last Answer : Practical Significance In the industry environment Electrical Engineering diploma graduate are expected to measure basic parameters like voltage, frequency, time period etc. for R-L series circuits. Therefore ... /varying L. 7. Draw the phasor diagram for each of reading for verification.

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = _:

Description : A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = _:  (1) Zero (2) Infinity (3) L/R (4) R/L 

Last Answer : A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = Zero.

A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C...

Description : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is:  (1) 25 (2) 50 (3) 100 (4) 200

Last Answer : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: 200.

In a series resonant circuit, maximum voltage across L occurs at

Description : In a series resonant circuit, maximum voltage across L occurs at  (a) Resonant frequency (b) Slightly below resonant frequency (c) Slightly above resonant frequency (d) At a frequency where I is maximum

Last Answer : In a series resonant circuit, maximum voltage across L occurs at Slightly above resonant frequency

The series and parallel resonance on L-C circuit differs in that?

Description : The series and parallel resonance on L-C circuit differs in that?

Last Answer : The series and parallel resonance on L-C circuit differs in that series resistance needs a low-resistance source for sharp rise in current.

In a series L-C circuit at the resonant frequency the?

Description : In a series L-C circuit at the resonant frequency the?

Last Answer : In a series L-C circuit at the resonant frequency the current is maximum.

In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied

Description : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is (A) 70 V (B) 50 V (C) 60 V (D) 100 V

Last Answer : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is 50 V

At ______ frequencies the parallel R-L circuit behaves as purely resistive.

Description : At ______ frequencies the parallel R-L circuit behaves as purely resistive.

Last Answer : At very high frequencies the parallel R-L circuit behaves as purely resistive.

In a R-L-C circuit?

Description : In a R-L-C circuit?

Last Answer : In a R-L-C circuit power is consumed in resistance and is equal to I R, exchange of power takes place between inductor and supply line, exchange of power takes place between capacitor and supply line, exchange of power does not take place between resistance and the supply line.

Magnitude of current at resonance in R-L-C circuit?

Description : Magnitude of current at resonance in R-L-C circuit?

Last Answer : The current will be maximum if it is a series rlc circuit.

In a circuit containing R, L and C, power loss can take place in?

Description : In a circuit containing R, L and C, power loss can take place in?

Last Answer : In a circuit containing R, L and C, power loss can take place in R only.

The power factor at resonance in R-L- C parallel circuit is?

Description : The power factor at resonance in R-L- C parallel circuit is?

Last Answer : since a rlc circuit at resonance behaves like a pure resistive circuit, i.e there is no phase difference between current and voltage, hence the power factor is unity.

In a loss-free R-L-C circuit the transient current is?

Description : In a loss-free R-L-C circuit the transient current is?

Last Answer : In a loss-free R-L-C circuit the transient current is sinusoidal.

Draw a circuit diagram of R.C. series circuit. Draw impedance triangle and power triangle for same circuit.

Description : Draw a circuit diagram of R.C. series circuit. Draw impedance triangle and power triangle for same circuit. 

Last Answer : Draw a circuit diagram of R.C. series circuit. Draw impedance triangle and power triangle for same circuit. 

In a series R-C circuit, with the increase in frequency, current

Description : In a series R-C circuit, with the increase in frequency, current (A) Reduces (B) Increases (C) Does not change (D) Becomes zero

Last Answer : In a series R-C circuit, with the increase in frequency, current Increases

For a series R -C circuit, the power factor corresponding to maximum power is

Description : For a series R -C circuit, the power factor corresponding to maximum power is (a) 0-5 lag (b) 0.5 lead (c) 0.707 lag (d) 0-707 lead

Last Answer : For a series R -C circuit, the power factor corresponding to maximum power is 0.707 lead

At very low frequencies a series R-C circuit behaves as almost purely?

Description : At very low frequencies a series R-C circuit behaves as almost purely?

Last Answer : At very low frequencies a series R-C circuit behaves as almost purely capacitive.

The time constant of a series R-C circuit is given by?

Description : The time constant of a series R-C circuit is given by?

Last Answer : The time constant of a series R-C circuit is given by RC.

In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load,

Description : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is (A) sinusoidal current (B) constant dc current (C) continuous rectangular pulses (D) alternating rectangular pulses

Last Answer : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is alternating rectangular pulses

SMERA is a joint initiative of _________ A. SIDBI & Leading PSBs B. Dun & Bradstreet Information Services India Private Limited (D&B) & Leading Private Banks C. RBI & SEBI D. Both (A) and (B) E. Both (A) and (C)

Description : SMERA is a joint initiative of _________ A. SIDBI & Leading PSBs B. Dun & Bradstreet Information Services India Private Limited (D&B) & Leading Private Banks C. RBI & SEBI D. Both (A) and (B) E. Both (A) and (C)

Last Answer : D. Both (A) and (B) Explanation: SMERA Ratings Limited (formerly SME Rating Agency of India Ltd.) is a joint initiative of Small Industries Development Bank of India (SIDBI), Dun & Bradstreet Information Services India Private Limited (D&B) and leading public and private sector banks in India.

To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current

Description :  To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current will _____.

Last Answer :  To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current will decrease.

A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of which the rod forms a part is r,

Description : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of which the rod forms a part is r,

Last Answer : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of ... lv)/(r)` D. `(Blv^(2))/(r)`

In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Description : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Last Answer : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3)) ... ` B. `90^(@)` C. `180^(@)` D. `60^(@)`

Instantaneous voltage and instantaneoss current in an L-R circuit in AC is V=100sin (100)t and `i=10sin(100t-pi//4)`. Match the following table, `{:(,

Description : Instantaneous voltage and instantaneoss current in an L-R circuit in AC is V=100sin (100)t and `i=10sin(100t-pi//4)`. Match the following table, `{:(,

Last Answer : Instantaneous voltage and instantaneoss current in an L-R circuit in AC is V=100sin (100)t and `i=10sin(100t ... power in one cycle",(S),"None"):}`

During current growth in L-R circuit, match the following table,

Description : During current growth in L-R circuit, match the following table,

Last Answer : During current growth in L-R circuit, match the following table,

The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l= ... (inN-m) at t=(0.3In 2) second.

The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length ... (inN-m) at t=(0.3In 2) second.

In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Description : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Last Answer : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt( ... 10 sqrt(2) A` C. `20 sqrt(2) A` D. `25 A`

In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Description : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Last Answer : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3) ... 2) A` C. `5 sqrt(6) A` D. `5 sqrt(3) A`

In an L-C -R search circuit connected to an AC source `V=V_(0)sin(100pi+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choose t

Description : In an L-C -R search circuit connected to an AC source `V=V_(0)sin(100pi+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choose t

Last Answer : In an L-C -R search circuit connected to an AC source `V=V_(0)sin(100pi+(pi)/(6))``V_(R)=40V, V_ ... (a) and (b) are correct D. Both a and b are wrong

The lines having R, L, C distributed along the circuit are called a) Lumped b) Distributed c) Parallel d) Paired

Description : The lines having R, L, C distributed along the circuit are called a) Lumped b) Distributed c) Parallel d) Paired

Last Answer : Ans: B

In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Description : In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Last Answer : Answer: D

V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Description : V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Last Answer : Ans: R=40 ohm, L=33.3 micro farads

Write equation of resultant impedance in R-L circuit.

Description : Write equation of resultant impedance in R-L circuit. 

Last Answer : The equation of resultant impedance in R-L circuit

Use Dual Trace Oscilloscope to Determine A.C Voltage and Current Response in Given R, L, C Circuit.

Description : Use Dual Trace Oscilloscope to Determine A.C Voltage and Current Response in Given R, L, C Circuit.

Last Answer : Practical Significance In the industry environment Electrical Engineering Diploma graduate are expected to handle cathode ray oscilloscope (CRO) to measure basic parameters like voltage, frequency, time ... components and emphasize a quantity, lagging or leading with respect to other quantity.