What are the advantages of LED bulbs ?

What are the advantages of LED bulbs ?
by

1 Answer

Answer :

There are many benefits to using LED bulbs. For example , LED bulbs are energy saving lamps , a type of electric lamp that requires less electricity to use. The real name is Compact Fluorescent Lamp (CFL for short). Due to the special technology these lamps use less electricity than ordinary incandescent lamps and at the same time radiate more light from less electricity. Typical types of ordinary lamps or bulbs of 60 watts to 100 watts are commonly used for home use. Which means these bulbs use 60 to 100 watts of electricity per hour. But to get the same amount of light, the cost of energy saving lamp is only 9 to 11 watts. Using LED bulbs does not harm the eyes. Moreover, LED lights are eco-friendly.
by

Related questions

What are the disadvantages of using energy bulbs ?

Description : What are the disadvantages of using energy bulbs ?

Last Answer : : For those who suffer from headaches , migraines or epilepsy, using a compact fluorescent lamp at home can cause some physical problems. If left in the light for a long time, the migraine patient ... a system to recycle damaged bulbs, such a system has not been developed in our country till date.

What are the benefits of using energy bulbs ?

Description : What are the benefits of using energy bulbs ?

Last Answer : There are several benefits to using energy saving bulbs. And they are: The light of this bulb is like the light of a tube light. In the case of ordinary tube lights , if there is a problem ... as a result of using lamps. The remaining 95 percent of the electricity is used to raise the temperature.

How to make LED lights ?

Description : How to make LED lights ?

Last Answer : Click on this link to watch the video of making LED lights practically. LED Light

Write the use of LED ?

Description : Write the use of LED ?

Last Answer : The use of LEDs is highlighted below: (a) For digital display on decaed instruments. (B) In digital watch. (C) On the computer. (D) In all the techniques in which invisible light is used. ... in image sensing circuit. (G) LED is used in silica fiber optical cable in optical communication circuit .

Write the properties of LED ?

Description : Write the properties of LED ?

Last Answer : LED features ( i) Fast on-off switching. ( ii) It is longevity. ( iii) Voltage consumption is low. ( iv) Gallium arsenide is used to obtain infrared algae.

What is LED ?

Description : What is LED ?

Last Answer : : Light emitting diode is called LED for short. As a result of the current flowing through the forward bias, light rays are emitted from it.

What is LED ? How does it work ?

Description : What is LED ? How does it work ?

Last Answer : The full form of LED is - Light Emitting Diode . It is a type of pn junction diode that can emit light. LEDs usually work in the forward direction. When the applied tilt voltage is applied to the ... come together. As a result of this union, energy is released which comes out in the form of light.

Why do we use LED Bulbs in Work Space?

Description : Why do we use LED Bulbs in Work Space?

Last Answer : Because they last a million times longer than regular bulbs. Is there any reason we shouldn’t use them anywhere?

Would you have use for candelabra bulbs that were energy saving (CFL or LED), yet produced 75+ watt light equivalent?

Description : Would you have use for candelabra bulbs that were energy saving (CFL or LED), yet produced 75+ watt light equivalent?

Last Answer : answer:No, because I ate my vegetables when I was a kid and don't have a Daylight only restriction on my drivers license. Seriously though, like many people, my home lighting is 40W-equivalent for ... the lower wattage bulbs are plenty bright enough for most people. TL:DR - it's lack of demand.

New LED light bulbs: do they emit more or less heat than standard incandescent?

Description : New LED light bulbs: do they emit more or less heat than standard incandescent?

Last Answer : answer:I could not guarantee accuracy, but from what I know LED is cooler. You can find out for sure if you buy one of each, and take turns standing in from of each one.

Have you ever used one of those new LED light bulbs?

Description : Have you ever used one of those new LED light bulbs?

Last Answer : I like them for certain applications, but they are not yet ready to replace all my bulbs. The light they give off just isn’t usually bright enough, or it is too odd of a color.

What is the equivalent of 100 watt incandescent light bulbs in LED light bulbs?

Description : What is the equivalent of 100 watt incandescent light bulbs in LED light bulbs?

Last Answer : That is a very good question, so I ended up doing a little research on the internet to find the information. It appears in order to match the intensity of a 100watt light bulb, you'll need 15watts of LED light bulbs.

LED Bulbs?

Description : LED Bulbs?

Last Answer : form_title= LED Bulbs form_header= Brighten up your life with LED bulbs. What wattage do you need?*= _ [50] How many bulbs do you need?*= {1, 2, 3, 4, 5, More than 5} Are the LED bulbs for indoor or outdoor use?*= () Indoor () Outdoor

Which bulb is better regular or LED bulbs?

Description : Which bulb is better regular or LED bulbs?

Last Answer : LED light bulbs definitely are more energy efficient than regularly normal light bulbs. Depending on the usage, LED lights can also last maybe twice or three times as much as regular bulbs. LED ones are better.

Save Energy In Your Home Office With LED Light bulbs?

Description : Save Energy In Your Home Office With LED Light bulbs?

Last Answer : LED light bulbs are pretty difficult to find in high luminosity standard bulb power levels, but they are simple to find for smaller needs like desk lamps, opening up a great light bulb power saving opportunity.

What is the best Brand of Led Light Bulbs to buy?

Description : What is the best Brand of Led Light Bulbs to buy?

Last Answer : The best brand of LED light bulbs to buy currently are Phillips brand. They offer the lowest price of readily available LED light bulbs.

What are the best smart LED light bulbs?

Description : What are the best smart LED light bulbs?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

What are the advantages to replaces regular incandescent light bulbs with CFL bulbs?

Description : What are the advantages to replaces regular incandescent light bulbs with CFL bulbs?

Last Answer : The CFL bulbs last for about 10,000 hours. The incandescent bulbs only last for about 1,500 hours. Most people won't go for the CFL because of the upfront costs but you'll save more money in the long run because they are also more energy efficient.

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

What features should a switchgear have ?

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

What are the components of switch gear ?

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

What do you mean by switchgear ?

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

What is an Earth Electrode ?

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

What earthing is done in hilly areas ?

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

What should be the size of rod earthing ?

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

What does earth continuity mean ?

Description : What does earth continuity mean ?

Last Answer : The conduction wire that connects the earthing lead to the metal cover of electrical furniture, appliances, or wiring is called the earth continuity wire.

Which earthing is less expensive ?

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

What should be the size of the pipe electrode ?

Description : What should be the size of the pipe electrode ?

Last Answer : The size of the pipe electrode should be 36 mm diameter 2 to 2.75 m long galvanized iron or steel pipe.

How many types of earthing and what are they ?

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

What are the essential elements for earthing ?

Description : What are the essential elements for earthing ?

Last Answer : They are _ a) earthen continuity b) earthing lead c) earthy electrode

What is the best earthing method ?

Description : What is the best earthing method ?

Last Answer : Pipe earthing method is best. This is because it is less expensive and when the soil dries out in the dry season , regular earthing can be done by pouring water through the pipes.

What is Neutral Plan ?

Description : What is Neutral Plan ?

Last Answer : A plane at infinite distance , where the value of electric field intensity and potential V is zero , is called Neautral Plan .

On what subject does inductance in transmission line depend ?

Description : On what subject does inductance in transmission line depend ?

Last Answer : a) On the line b) Conductor spacing c) Conductor radius

What does GMD & GMR mean ?

Description : What does GMD & GMR mean ?

Last Answer : GMD = Geometrical Mean Distance GMR = Geometrical Mean Radiue.

What is the best economic pf ?

Description : What is the best economic pf ?

Last Answer : Improving the power factor means maximum annual savings , which is called the best economic power factor.