Resistance of a metal rod does not depend on which of the following ? 1) ... resistivity 2) density 3). Length 4), warmth ..... Explain it in a little details ?

Question

Resistance of a metal rod does not depend on which of the following ? 1) ... resistivity 2) density 3). Length 4), warmth ..... Explain it in a little details ?

asked Jan 28, 2022 by anonymous

1 Answer

Answer :

Answer : On its density. Because it depends on how close or how far the atom must be seen.

answered Jan 28, 2022 by anonymous

Related questions

A wire of resistance `10 Omega` is drawn out so that its length is thrice its original length. Calculate its new resistance (resistivity and density o

Description : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original length. Calculate its new resistance (resistivity and density o

Last Answer : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original ... (resistivity and density of the material remain uncharged).

The resistance of a conductor is inversely proportional to its - (1) temperature (2) resistivity (3) area of cross section (4) length

Description : The resistance of a conductor is inversely proportional to its - (1) temperature (2) resistivity (3) area of cross section (4) length

Last Answer : (3) area of cross section Explanation: The resistance of a current carrying conductor is inversely proportional to the area of cross section of the conductor. This is because the resistance occurs due to the collision of electrons/charged particles.

A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of which the rod forms a part is r,

Description : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of which the rod forms a part is r,

Last Answer : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of ... lv)/(r)` D. `(Blv^(2))/(r)`

When a metal becomes a superconductor, there is a tremendous decrease in its: w) total volume x) electrical resistance y) length z) density

Description : When a metal becomes a superconductor, there is a tremendous decrease in its: w) total volume x) electrical resistance y) length z) density

Last Answer : ANSWER: X -- ELECTRICAL RESISTANCE

resistivity of wire depend on?

Description : resistivity of wire depend on?

Last Answer : Resitivity of wire depends on material, electrical resistance of that material, area of cross section and length.

The resistance of a strip of copper of rectangular cross-section is 2Ω. A metal of resistivity twice that of ....

Description : The resistance of a strip of copper of rectangular cross-section is 2Ω. A metal of resistivity twice that of copper is coated on its upper surface to a thickness equal to that of copper strip. The resistance of composite strip will be

Last Answer : The resistance of a strip of copper of rectangular cross-section is 2Ω. A metal of resistivity twice that of copper is coated on its upper surface to a thickness equal to that of copper strip. The resistance of composite strip will be 4/3Ω.

Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Description : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Last Answer : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2 ... the material is `2.0xx10^(-8)(Omega)m`.

The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Description : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Last Answer : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Find the resistivity of a material having resistance 20kohm, area 2 units and length of 12m. a) 6666.6 b) 3333.3 c) 1200 d) 2000

Description : Find the resistivity of a material having resistance 20kohm, area 2 units and length of 12m. a) 6666.6 b) 3333.3 c) 1200 d) 2000

Last Answer : b) 3333.3

The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Description : The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Last Answer : c) 400

A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

Kilowatt-hour (KWH) is the unit of - (1) power (2) resistance (3) resistivity (4) energy

Description : Kilowatt-hour (KWH) is the unit of - (1) power (2) resistance (3) resistivity (4) energy

Last Answer : (4) energy Explanation: The kilowatt hour (symbol kWh, kW h or kW h) is a unit of energy equal to 3.6 megajoules. If the energy is being transmitted or used at a constant rate (power) over a period of time, the total energy in kilowatt hours is the power in kilowatts multiplied by the time in hours.

Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Description : Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Last Answer : (A) Length of the pipe

Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Description : Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Last Answer : A) Pipe length

A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is connected to a battery across opposite faces. The resistance wi

Description : A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is connected to a battery across opposite faces. The resistance wi

Last Answer : A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is ... 2)` cm faces D. same irrepective of the three faces

The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l= ... (inN-m) at t=(0.3In 2) second.

The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length ... (inN-m) at t=(0.3In 2) second.

A metal ball on an insulated stand is touched by a positively charged glass rod. What happens to the metal ball? Does it w) gain protons and lose electrons x) gain protons y) gain more protons than electrons z) lose electrons

Description : A metal ball on an insulated stand is touched by a positively charged glass rod. What happens to the metal ball? Does it w) gain protons and lose electrons x) gain protons y) gain more protons than electrons z) lose electrons

Last Answer : ANSWER: Z -- LOSE ELECTRONS

Velocity of sound in air does not depend on – (1) Density of air (2) Temperature of air (3) Pressure of air (4) Humidity of air

Description : Velocity of sound in air does not depend on – (1) Density of air (2) Temperature of air (3) Pressure of air (4) Humidity of air

Last Answer : (3) Pressure of air Explanation: Assuming air to be an ideal gas, the speed of sound depends on temperature only. As air temperature increases, so does the speed of sound and vice versa. ... air pressure because the air pressure and air density are proportional to each other at the same temperature.

The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Description : The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Last Answer : ANSWER: X -- HEAT OF VAPORIZATION

Velocity of sound in air does not depend on (1) Density of air (2) Temperature of air (3) Pressure of air (4) Humidity of air

Description : Velocity of sound in air does not depend on (1) Density of air (2) Temperature of air (3) Pressure of air (4) Humidity of air

Last Answer : Pressure of air

How does the resistance of the conductor depend on the length and cross section of the conductor ?

Description : How does the resistance of the conductor depend on the length and cross section of the conductor ?

Last Answer : Conductor resistance is proportional to the length of the conductor and disproportionate to the cross section .

Specific resistance of a wire a. will depend on its length b. will depend on its radius c. will depend on the type of material of the wire d. will depend on none of the above

Description : Specific resistance of a wire a. will depend on its length b. will depend on its radius c. will depend on the type of material of the wire d. will depend on none of the above

Last Answer : c. will depend on the type of material of the wire

Calculate the conduction current density when the resistivity of a material with an electric field of 5 units is 4.5 units. a) 22.5 b) 4.5/5 c) 5/4.5 d) 9.5

Description : Calculate the conduction current density when the resistivity of a material with an electric field of 5 units is 4.5 units. a) 22.5 b) 4.5/5 c) 5/4.5 d) 9.5

Last Answer : c) 5/4.5

Calculate the conduction density of a material with resistivity of 0.02 units and electric intensity of 12 units. a) 300 b) 600 c) 50 d) 120

Description : Calculate the conduction density of a material with resistivity of 0.02 units and electric intensity of 12 units. a) 300 b) 600 c) 50 d) 120

Last Answer : b) 600

Find the current density of a material with resistivity 20 units and electric field intensity 2000 units. a) 400 b) 300 c) 200 d) 100

Description : Find the current density of a material with resistivity 20 units and electric field intensity 2000 units. a) 400 b) 300 c) 200 d) 100

Last Answer : d) 100

During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Description : During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Last Answer : (A) Density

When a sample of germanium and silicon having same impurity density are kept at room temperature then Resistivity of silicon will be higher than that of germanium, Why?

Description : When a sample of germanium and silicon having same impurity density are kept at room temperature then Resistivity of silicon will be higher than that of germanium, Why?

Last Answer : Ans-The answer is simple. Consider the PN diode for Ge 0.3eV is the breakdown voltage and in the case of Si its 0.7eV since the impurities are added in the same amount the bond due to the other atoms of the Si makes it resistive compared to the Ge.. thats all!

On which of the following variables heat convected depends ? (a) Power density (b) Temperature difference between heated surface and coolant (c) Thermal resistivity, density, specific heat (d) Gravitational constant (e) All ofthe above

Description : On which of the following variables heat convected depends ? (a) Power density (b) Temperature difference between heated surface and coolant (c) Thermal resistivity, density, specific heat (d) Gravitational constant (e) All ofthe above

Last Answer : (e) All ofthe above

Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Description : Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Last Answer : resistance

The resistivity of a metal is a function of temperature because

Last Answer : The resistivity of a metal is a function of temperature because the amplitude of vibration of the atoms varies with temperature.

By increasing impurity content in the metal alloy the residual resistivity always

Description : By increasing impurity content in the metal alloy the residual resistivity always

Last Answer : By increasing impurity content in the metal alloy the residual resistivity always increases.

Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a wire 10 km long having resistance of `10

Description : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a wire 10 km long having resistance of `10

Last Answer : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a ... copper is `8.9xx10^(3) kg m^(-3)`.

Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Description : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Last Answer : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is ` ... wire, what will be the current in the wire ?

What is specific resistance or resistivity of the material?

Description : What is specific resistance or resistivity of the material?

Last Answer : Specific resistance of the material is the resistance of a piece of unit length and unit cross-section (unit cube of that material). That is the resistance between the opposite faces of unit cube of the material. ... face of that material. The unit of specific resistance is Ω/cm3 , Ω/inch3 , Ω/m3 .

A material with zero resistivity is said to have a) Zero conductance b) Infinite conductance c) Zero resistance d) Infinite resistance

Description : A material with zero resistivity is said to have a) Zero conductance b) Infinite conductance c) Zero resistance d) Infinite resistance

Last Answer : c) Zero resistance

Reciprocal of resistivity is called a. Resistance b. Inductance c. Conductivity d. Flexibility

Description : Reciprocal of resistivity is called a. Resistance b. Inductance c. Conductivity d. Flexibility

Last Answer : c. Conductivity

Problems on resistance and resistivity

Description : Problems on resistance and resistivity

Last Answer : Problem on resistance and resistivity 1 : https://youtu.be/OqavD7OlZUs Problem on resistance and resistivity 2 : https://youtu.be/0eo8VO8cpwk Problem on resistance and resistivity 3 : https:// ... https://youtu.be/3neLRCTz0RQ Problem on resistance and resistivity 13 : https://youtu.be/vBCkvPOiztY