Pure nickel is (A) Ferromagnetic above its curie point (i.e., 415°C)(B) Having h.c.p. crystal lattice(C) Ferromagnetic at room temperature(D) Not resistant to oxidation at high temperature

Pure nickel is
(A) Ferromagnetic above its curie point (i.e., 415°C)
(B) Having h.c.p. crystal lattice
(C) Ferromagnetic at room temperature
(D) Not resistant to oxidation at high temperature
by

2 Answers

Answer :

(B) Having h.c.p. crystal lattice
(C) Ferromagnetic at room temperature
(D) Not resistant to oxidation at high temperature
by

Answer :

(C) Ferromagnetic at room temperature
by

Related questions

Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Description : Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Last Answer : (A) Is used as an alloying element for both ferrous & non-ferrous alloys

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D

The temperature at which ferromagnetic material can no longer be magnetised by the outside forces, is termed as the (A) Critical point (B) Curie temperature (C) Inversion temperature (D) Eutectic temperature

Description : The temperature at which ferromagnetic material can no longer be magnetised by the outside forces, is termed as the (A) Critical point (B) Curie temperature (C) Inversion temperature (D) Eutectic temperature

Last Answer : (B) Curie temperature

The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

Description : The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

Last Answer : (B) Curie point

The transition temperature at which all the ferromagnetic materials become paramagnetic materials is termed as the 'Curie temperature'. Its value for cobalt is __________ °C. (A) 768 (B) 1127 (C) 1359 (D) 1480

Description : The transition temperature at which all the ferromagnetic materials become paramagnetic materials is termed as the 'Curie temperature'. Its value for cobalt is __________ °C. (A) 768 (B) 1127 (C) 1359 (D) 1480

Last Answer : (B) 1127

A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Description : A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Last Answer : (C) Paramagnetic

Heating of ferromagnetic materials to a temperature above Curie temperature makes it (A) Insulator for heat & electricity transmission (B) Ferritic (C) Behave like paramagnetic materials (D) Superconductor

Description : Heating of ferromagnetic materials to a temperature above Curie temperature makes it (A) Insulator for heat & electricity transmission (B) Ferritic (C) Behave like paramagnetic materials (D) Superconductor

Last Answer : Option C

Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic (bcc) crystal lattice structure is stronger & less ductile than those having face centred cubic (fcc) crystal lattice structure (C) Tungsten has a body centred cubic (bcc) crystal lattice structure (D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure

If a ferromagnetic material is heated upto Curie temperature, it becomes

Description : If a ferromagnetic material is heated upto Curie temperature, it becomes (a) Permanent magnet (b) Anti-ferromagnetic material (c) Diamagnetic material (d) Paramagnetic material 

Last Answer : Paramagnetic material

When the temperature of a ferromagnetic material exceeds the Curie temperature, it behaves similar to a

Description : When the temperature of a ferromagnetic material exceeds the Curie temperature, it behaves similar to a 

Last Answer : When the temperature of a ferromagnetic material exceeds the Curie temperature, it behaves similar to a Diamagnetic material

The crystal of diamond shines due to (a) High density (b) Total internal reflection (c) Crystal lattice (d) None of these

Description : The crystal of diamond shines due to (a) High density (b) Total internal reflection (c) Crystal lattice (d) None of these

Last Answer : Ans:(b)

Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Description : Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Last Answer : (D) Simple cubic

Closeness of packing is maximum in case of __________ crystal lattice. (A) Face centred (B) Simple cubic (C) Body centred (D) None of these

Description : Closeness of packing is maximum in case of __________ crystal lattice. (A) Face centred (B) Simple cubic (C) Body centred (D) None of these

Last Answer : (A) Face centred

Mild steel has __________ crystal lattice structure. (A) Face centred cubic (fcc) (B) Body centred cubic (bcc) (C) Orthorhombic (D) Cubic

Description : Mild steel has __________ crystal lattice structure. (A) Face centred cubic (fcc) (B) Body centred cubic (bcc) (C) Orthorhombic (D) Cubic

Last Answer : (B) Body centred cubic (bcc)

A smallest three dimensional part of a crystal lattice is called. a) A particle b) A molecules c) A unit cell d) An atom

Description : A smallest three dimensional part of a crystal lattice is called. a) A particle b) A molecules c) A unit cell d) An atom

Last Answer : c) A unit cell

Which class of solids could have London Forces the attractive forces between particles in crystal lattice positions? w) ionic x) covalent y) metallic z) molecular

Description : Which class of solids could have London Forces the attractive forces between particles in crystal lattice positions? w) ionic x) covalent y) metallic z) molecular

Last Answer : ANSWER: Z -- MOLECULAR

The type of crystal lattice exemplified in a diamo is: w) ionic crystal x) covalent network crystal y) metallic crystal z) covalent molecular crystal

Description : The type of crystal lattice exemplified in a diamo is: w) ionic crystal x) covalent network crystal y) metallic crystal z) covalent molecular crystal

Last Answer : ANSWER: X -- COVALENT NETWORK CRYSTAL

Nickel is a __________ material. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Description : Nickel is a __________ material. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Last Answer : (A) Ferromagnetic

Nickel is a __________ material. (A) Ferromagnetic (B) Semi-conductor (C) Paramagnetic (D) Ferroelectric

Description : Nickel is a __________ material. (A) Ferromagnetic (B) Semi-conductor (C) Paramagnetic (D) Ferroelectric

Last Answer : (A) Ferromagnetic

Which of the following is not a ferromagnetic material? (A) Nickel (B) Cobalt (C) Alumini

Description : Which of the following is not a ferromagnetic material? (A) Nickel (B) Cobalt (C) Alumini

Last Answer : Option C

A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Last Answer : (A) More corrosion resistant

Magnets attract magnetic substances are iron, nickel, cobalt, etc. They can also repel - (1) paramagnetic substances (2) ferromagnetic substances (3) diamagnetic substances (4) non-magnetic substances

Description : Magnets attract magnetic substances are iron, nickel, cobalt, etc. They can also repel - (1) paramagnetic substances (2) ferromagnetic substances (3) diamagnetic substances (4) non-magnetic substances

Last Answer : (3) diamagnetic substances Explanation: Those materials which when placed in a magnetic field become weakly magnetized in a direction opposite to that of the applied field, are called as diamagnetic materials ... : bismuth, antimony, copper, gold, quartz, mercury, water, alcohol, air, hydrogen etc.

Which of the following is a ferromagnetic material ? A. Tungsten B. Aluminium C. Copper D. Nickel (Answer)

Description : Which of the following is a ferromagnetic material ? A. Tungsten B. Aluminium C. Copper D. Nickel (Answer)

Last Answer : D. Nickel (Answer)

Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Description : Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Last Answer : (d) Nickel

Name any THREE of the four elements that are ferromagnetic at room temperature (25 degrees Celsius).

Description : Name any THREE of the four elements that are ferromagnetic at room temperature (25 degrees Celsius).

Last Answer : ANSWER: IRON (FE); COBALT (CO); NICKEL (NI); GADOLINIUM GD)

C and Si both have same lattice structure, having 4 bonding electrons in each. However, C is insulator where as Si is intrinsic semiconductor. This is because (1) The four bonding electrons in the case of C lie in the third orbit, whereas for Si they lie in the fourth orbit (2) In case of C the valance band is not completely filled at absolute zero temperature (3) In case of C the conduction band is partly filled even at absolute zero temperature (4) The four bonding electrons in the case of C lie in the second orbit, whereas in the case of Si they lie in the third

Description : C and Si both have same lattice structure, having 4 bonding electrons in each. However, C is insulator where as Si is intrinsic semiconductor. This is because (1) The four bonding electrons in the case of C ... the case of C lie in the second orbit, whereas in the case of Si they lie in the third

Last Answer : (4) The four bonding electrons in the case of C lie in the second orbit, whereas in the case of Si they lie in the third

The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Description : The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Last Answer : Option A

__________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Last Answer : (B) Niobium

Define Ferromagnetic materials. Draw B- H Curve.

Description : Define Ferromagnetic materials. Draw B- H Curve.

Last Answer : Ferromagnetic materials: The materials which possess magnetism in the absence of applied magnetic field is known as ferromagnetic materials.

Materials having __________ lattice structure are usually most ductile. (A) FCC (B) BCC (C) HCP (D) Cubic

Description : Materials having __________ lattice structure are usually most ductile. (A) FCC (B) BCC (C) HCP (D) Cubic

Last Answer : (A) FCC

The most resistant material to alkaline corrosion is (A) Duriron (B) Nickel (C) Aluminium (D) Karbate

Description : The most resistant material to alkaline corrosion is (A) Duriron (B) Nickel (C) Aluminium (D) Karbate

Last Answer : (B) Nickel

Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Last Answer : Option B

Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Last Answer : Option B

Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Description : Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Last Answer : (B) Resistant to atmospheric corrosion

Davisson and Germer scattered electrons from a crystal of nickel. The scattered electrons formed a strong diffraction pattern. What important conclusion was drawn from this experiment?

Description : Davisson and Germer scattered electrons from a crystal of nickel. The scattered electrons formed a strong diffraction pattern. What important conclusion was drawn from this experiment?

Last Answer : ANSWER: ELECTRONS ACTED LIKE WAVES

Radioactivity was discovered by (1) J.J. Thomson (2) W.Roentgen (3) H.Becquerel (4) M. Curie

Description : Radioactivity was discovered by (1) J.J. Thomson (2) W.Roentgen (3) H.Becquerel (4) M. Curie

Last Answer : (3) H.Becquerel Explanation: Antoine-Henri Becquerel is known for his discovery of radioactivity, for which he received the Nobel Prize for Physics in 1903. Unstable atomic nuclei will spontaneously decompose to form nuclei with a higher stability.

At room temperature, an intrinsic silicon crystal acts approximately as ……

Last Answer : At room temperature, an intrinsic silicon crystal acts approximately as An insulator.

'Corrosion-resistant material' and 'noncorrodible material' will include which of the following ____________. A. plastics B. silver C. copper-nickel D. all of the above

Description : 'Corrosion-resistant material' and 'noncorrodible material' will include which of the following ____________. A. plastics B. silver C. copper-nickel D. all of the above

Last Answer : Answer: D

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Curie point is the temperature at which (1) Matter becomes radioactive (2) A metal loses magnetic properties (3) A metal loses conductivity (4) Transmutation of metal occurs

Description : Curie point is the temperature at which (1) Matter becomes radioactive (2) A metal loses magnetic properties (3) A metal loses conductivity (4) Transmutation of metal occurs

Last Answer : (2) A metal loses magnetic properties Explanation: In physics and materials science, the Curie temperature (TO, or Curie point, is the temperature at which a ferromagnetic or a ... in piezoelectric materials to refer to the temperature at which spontaneous polarization is lost on heating.

Which of the following is NOT closely associated with a non-magnetic Phase Diagram? w) Eutectic Temperature (pron: you-tek-tik) x) Curie Point y) Solidus z) Liquidus Curves

Description : Which of the following is NOT closely associated with a non-magnetic Phase Diagram? w) Eutectic Temperature (pron: you-tek-tik) x) Curie Point y) Solidus z) Liquidus Curves

Last Answer : ANSWER: X -- CURIE POINT

Curie point is the temperature at which (1) Matter becomes radioactive (2) A metal loses magnetic properties. (3) A metal loses conductivity (4) Transmutation of metal occurs.

Description : Curie point is the temperature at which (1) Matter becomes radioactive (2) A metal loses magnetic properties. (3) A metal loses conductivity (4) Transmutation of metal occurs.

Last Answer : A metal loses magnetic properties.

. Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Description : . Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Last Answer : (C) Give elasticity & prevent cracking of the film

The materials having very small susceptibility at all temperatures are a) Antiferromagnetic b) Diamagnetic c) Ferromagnetic d) Paramagnetic

Description : The materials having very small susceptibility at all temperatures are a) Antiferromagnetic b) Diamagnetic c) Ferromagnetic d) Paramagnetic

Last Answer : a) Antiferromagnetic

The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel(C) Platinum(D) Nickel

Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel

Last Answer : (A) Alumina

Oils are partially hydrogenated (not fully) to manufacture Vanaspati, because fully saturated solidified oils (A) Cause cholesterol build up and blood clotting (B) Are prone to rancid oxidation (C) Always contain some amount of nickel (as their complete removal is very difficult) (D) Have affinity to retain harmful sulphur compounds

Description : Oils are partially hydrogenated (not fully) to manufacture Vanaspati, because fully saturated solidified oils (A) Cause cholesterol build up and blood clotting (B) Are prone to rancid oxidation (C ... (as their complete removal is very difficult) (D) Have affinity to retain harmful sulphur compounds

Last Answer : (A) Cause cholesterol build up and blood clotting

Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Last Answer : (B) Vanadium

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum

Titanium is used in dentistry A. In a very pure form in implants B. In an alloy with aluminium in casting for crowns and bridges C. In an alloy with nickel in orthodontic wires D. A and B E. A, B and C

Description : Titanium is used in dentistry A. In a very pure form in implants B. In an alloy with aluminium in casting for crowns and bridges C. In an alloy with nickel in orthodontic wires D. A and B E. A, B and C

Last Answer : E. A, B and C

Which metallic element is liquid at room temperature? A. Zinc B. Nickel C. Lead D. Mercury (Answer)

Description : Which metallic element is liquid at room temperature? A. Zinc B. Nickel C. Lead D. Mercury (Answer)

Last Answer : D. Mercury (Answer)