A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

A ferrite core has less eddy current loss than an iron core because ferrites have
 (A) High resistance. (B) Low resistance.
(C) Low permeability. (D) High hysteresis.
by

1 Answer

Answer :

(A) High resistance.
by

Related questions

A ferrite core has less eddy current loss than an iron core because?

Description : A ferrite core has less eddy current loss than an iron core because?

Last Answer : A ferrite core has less eddy current loss than an iron core because ferrites have high hysteresis.

71 High frequency transformers sometimes make use of ferrite cores because it has A. High specific gravity B. High resistance C. High hysteresis D. low permeability

Description : 71 High frequency transformers sometimes make use of ferrite cores because it has A. High specific gravity B. High resistance C. High hysteresis D. low permeability

Last Answer : B. High resistance

Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Description : Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Last Answer : (D) Light weight permanent magnets.

Eddy current loss is proportional to the (A) frequency. (B) square of the frequency. (C) cube of the frequency. (D) square-root of the frequency.

Description : Eddy current loss is proportional to the (A) frequency. (B) square of the frequency. (C) cube of the frequency. (D) square-root of the frequency.

Last Answer : (B) square of the frequency.

43 The purpose of providing an iron core in a transformer is to A.Provide support to windings B. Reduce hysteresis loss C. decrease the reluctance of the magnetic path D. reduce eddy current losses

Description : 43 The purpose of providing an iron core in a transformer is to A.Provide support to windings B. Reduce hysteresis loss C. decrease the reluctance of the magnetic path D. reduce eddy current losses

Last Answer : C. Decrease the reluctance of the magnetic path

Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Description : Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Last Answer : (A) ferromagnetic material.

Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Description : Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Last Answer : (D) Grain orientation of material.

Which of the following losses is/are present in every direct current generator armature? A. Winding copper loss B. Core eddy current loss C. Magnetic hysteresis loss D. All of the above.

Description : Which of the following losses is/are present in every direct current generator armature? A. Winding copper loss B. Core eddy current loss C. Magnetic hysteresis loss D. All of the above.

Last Answer : Answer: D

Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Description : Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Last Answer : C) high thermal conductivity

The relative permeability of a paramagnetic substance is (A) unity. (B) slightly more than unity. (C) zero. (D) less than unity.

Description : The relative permeability of a paramagnetic substance is (A) unity. (B) slightly more than unity. (C) zero. (D) less than unity.

Last Answer : (B) slightly more than unity.

Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical appliances made of silicon steel contains maximum percentage of silicon (about 4%)? (A) Armature of small motors/generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Description : Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical ... /generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Last Answer : (D) High frequency transformers

The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Description : The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Last Answer : (C) Silver.

As an armature revolves within a magnetic field, friction is developed between the rotated magnetized particles as they pass through each magnetization cycle. This results in ____________. A. copper loss B. eddy-current loss C. hysteresis loss D. armature reaction

Description : As an armature revolves within a magnetic field, friction is developed between the rotated magnetized particles as they pass through each magnetization cycle. This results in ____________. A. copper loss B. eddy-current loss C. hysteresis loss D. armature reaction

Last Answer : Answer: C

70] Silicon steel used in laminations mainly reduces A. Hysteresis loss B. Eddy current losses C. Copper loss D. All of the above

Description : 70] Silicon steel used in laminations mainly reduces A. Hysteresis loss B. Eddy current losses C. Copper loss D. All of the above

Last Answer : A. Hysteresis loss

39 Which loss is not common between a transformer and rotating machines? A. Eddy current loss B. Copper loss C. Windage loss D. Hysteresis loss

Description : 9 Which loss is not common between a transformer and rotating machines? A. Eddy current loss B. Copper loss C. Windage loss D. Hysteresis loss

Last Answer : A. Eddy current loss

24 Transformer cores are laminated in order to A. simplify its construction B. minimise eddy current loss C. reduce cost D. reduce hysteresis loss

Description : 24 Transformer cores are laminated in order to A. simplify its construction B. minimise eddy current loss C. reduce cost D. reduce hysteresis loss

Last Answer : B. Minimise eddy current loss

17. Which type of loss is not common to transformer and rotating machines? A. Eddy current loss B. Copper loss C. Hysteresis loss D. Windage loss

Description : 17. Which type of loss is not common to transformer and rotating machines? A. Eddy current loss B. Copper loss C. Hysteresis loss D. Windage loss

Last Answer : D. Windage loss

The armature of a dc machine is laminated to reduce: (A) Eddy current loss (B) Hysteresis loss (C) copper losses (D) friction and windage losses

Description : The armature of a dc machine is laminated to reduce: (A) Eddy current loss (B) Hysteresis loss (C) copper losses (D) friction and windage losses

Last Answer : Ans: A Thinner the laminations, greater is the resistance offered to the induced e.m.f., smaller the current and hence lesser the I2R loss in the core.

A 220/440 V, 50 Hz, 5 KVA, single phase transformer operates on 220V, 40Hz supply with secondary winding open circuited. Then (A) Both eddy current and hysteresis losses decreases. (B) Both eddy current and hysteresis losses increases. (C) Eddy current loss remains the same but hysteresis loss increases. (D) Eddy current loss increases but hysteresis loss remains the same.

Description : A 220/440 V, 50 Hz, 5 KVA, single phase transformer operates on 220V, 40Hz supply with secondary winding open circuited. Then (A) Both eddy current and hysteresis losses decreases. (B) Both ... same but hysteresis loss increases. (D) Eddy current loss increases but hysteresis loss remains the same.

Last Answer : (A) Both eddy current and hysteresis losses decreases.

A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and

Description : A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and frequency are doubled, the new core losses are (A) 140 W (B) 180 W (C) 240 W (D) 480 W

Last Answer : A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and frequency are doubled, the new core losses are 240 W

What is the difference between eddy current and hysteresis loss?

Description : What is the difference between eddy current and hysteresis loss?

Last Answer : Loss occurred by magnetising and demagnetising process is called histerisis loss and the current flowed due to the magnetic field produced by the electric field applied is called eddy current losses

Explain hysteresis loss, eddy current loss and skin effect limitations with reference to magnetic material.

Description : Explain hysteresis loss, eddy current loss and skin effect limitations with reference to magnetic material.

Last Answer : Hysteresis loss: Hysteresis loss is a loss which occurs due to the friction of magnetic domain due to the change in magnetic field in ferromagnetic material like iron. Hysteresis loss causes power loss ... loss in transformer is given by, We=Kef2Kf2Bm2watts Skin effect limitations:

The relative permeability is less than unity is case of (a) ferromagnetic materials (b) ferrites (c) non-ferrous materials (d) diamagnetic materials

Description : The relative permeability is less than unity is case of (a) ferromagnetic materials (b) ferrites (c) non-ferrous materials (d) diamagnetic materials

Last Answer : (d) diamagnetic materials

42 The efficiency of a transformer will be maximum when A. copper losses = hysteresis losses B. Hysteresis losses = eddy current losses C. Eddy current losses = copper losses D. Copper losses = iron losses

Description : 42 The efficiency of a transformer will be maximum when A. copper losses = hysteresis losses B. Hysteresis losses = eddy current losses C. Eddy current losses = copper losses D. Copper losses = iron losses

Last Answer : D. Copper losses = iron losses

Materials that retain a large part of their magnetization, after the magnetizing force is removed, are said to have _____________. A. low hysteresis loss B. high flux density C. high permanence D. high permeability

Description : Materials that retain a large part of their magnetization, after the magnetizing force is removed, are said to have _____________. A. low hysteresis loss B. high flux density C. high permanence D. high permeability

Last Answer : Answer: C

Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Description : Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Last Answer : (b) high permeability and low hysteresis loss

19 .Transformer cores are built up from laminations rather than from solid metal so that A. Oil penetrates the core more easily B. Eddy current loss is reduced C. Less lamination is required for the windings D. Turn ratio is higher than voltage ratio

Description : 19 Transformer cores are built up from laminations rather than from solid metal so that A. Oil penetrates the core more easily B. Eddy current loss is reduced C. Less lamination is required for the windings D. Turn ratio is higher than voltage ratio

Last Answer : B. Eddy current loss is reduced

Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Description : Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Last Answer : (A) Negative

The property due to which the resistance of some metal or compound vanishes under certain conditions is (A) Semi conductivity. (B) Super conductivity. (C) Curie point. (D) Magnetostriction.

Description : The property due to which the resistance of some metal or compound vanishes under certain conditions is (A) Semi conductivity. (B) Super conductivity. (C) Curie point. (D) Magnetostriction.

Last Answer : (B) Super conductivity.

Brass is an alloy of (A) copper and zinc. (B) copper and iron. (C) copper and Aluminium. (D) copper and tin.

Description : Brass is an alloy of (A) copper and zinc. (B) copper and iron. (C) copper and Aluminium. (D) copper and tin.

Last Answer : (A) copper and zinc.

69 In case there are burrs on the edges of the laminations of the transformer, it is likely to result in A. Vibrations B. Noise C. Higher eddy currents loss D. Higher hysteresis loss

Description : 69 In case there are burrs on the edges of the laminations of the transformer, it is likely to result in A. Vibrations B. Noise C. Higher eddy currents loss D. Higher hysteresis loss

Last Answer : C. Higher eddy currents loss

The conductivity of copper is less than that of silver by (A) 5 – 10 %. (B) 50 – 60 %. (C) 80 – 90 %. (D) 20 – 30 %.

Description : The conductivity of copper is less than that of silver by (A) 5 – 10 %. (B) 50 – 60 %. (C) 80 – 90 %. (D) 20 – 30 %.

Last Answer : (A) 5 – 10 %.

Large scale integration chips have between (A) Less than 10 components. (B) 10 and 100 components. (C) 100 and 1000 components. (D) More than 1000 components.

Description : Large scale integration chips have between (A) Less than 10 components. (B) 10 and 100 components. (C) 100 and 1000 components. (D) More than 1000 components.

Last Answer : (C) 100 and 1000 components.

The dielectric constant of air is practically taken as (A) more than unity. (B) unity. (C) less than unity. (D) zero.

Description : The dielectric constant of air is practically taken as (A) more than unity. (B) unity. (C) less than unity. (D) zero.

Last Answer : (B) unity.

Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Description : Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Last Answer : (B) Silicon sheet steel.

Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Description : Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Last Answer : (B) low resistivity conducting materials.

Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) Solders generally melt at less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Last Answer : Option B

Barrier potential in a P-N junction is caused by (A) Thermally generated electrons and holes. (B) Diffusion of majority carriers across the junction. (C) Migration of minority carriers across the junction. (D) Flow of drift current.

Description : Barrier potential in a P-N junction is caused by (A) Thermally generated electrons and holes. (B) Diffusion of majority carriers across the junction. (C) Migration of minority carriers across the junction. (D) Flow of drift current.

Last Answer : (B) Diffusion of majority carriers across the junction.

Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Description : Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Last Answer : (B) temperature.

The armature cores of the D.C. motors are constructed with laminations to ___________. A. eliminate hysteresis B. minimize brush sparking C. reduce eddy current losses D. compensate for armature reaction

Description : The armature cores of the D.C. motors are constructed with laminations to ___________. A. eliminate hysteresis B. minimize brush sparking C. reduce eddy current losses D. compensate for armature reaction

Last Answer : Answer: C

The armature cores of the D.C. motors are constructed with laminations to ___________. A. eliminate hysteresis B. minimize brush sparking C. reduce eddy current losses D. compensate for armature reaction

Description : The armature cores of the D.C. motors are constructed with laminations to ___________. A. eliminate hysteresis B. minimize brush sparking C. reduce eddy current losses D. compensate for armature reaction

Last Answer : Answer: C

Armature cores in a DC generator are made of laminated steel sheets to _____________. A. fit the curvature of the frame B. increase the hysteresis effect C. reduce eddy current losses D. allow for easy assembly

Description : Armature cores in a DC generator are made of laminated steel sheets to _____________. A. fit the curvature of the frame B. increase the hysteresis effect C. reduce eddy current losses D. allow for easy assembly

Last Answer : Answer: C

Eddy current damping is an example of _____ A Coulomb damping B Hysteresis damping C Viscous damping D Dry friction damping

Description : Eddy current damping is an example of _____ A Coulomb damping B Hysteresis damping C Viscous damping D Dry friction damping

Last Answer : C Viscous damping

Eddy current damping is an example of _____A. Coulomb damping B. Hysteresis damping C. Viscous damping D. Dry friction damping

Description : Eddy current damping is an example of _____A. Coulomb damping B. Hysteresis damping C. Viscous damping D. Dry friction damping

Last Answer : C. Viscous damping

Eddy current damping is an example of _____ A) Coulomb damping B) Hysteresis damping C) Viscous damping D) Dry friction damping

Description : Eddy current damping is an example of _____ A) Coulomb damping B) Hysteresis damping C) Viscous damping D) Dry friction damping

Last Answer : C) Viscous damping

Eddy current damping is an example of _____ a. Coulomb damping b. Hysteresis damping c. Viscous damping d. Dry friction damping

Description : Eddy current damping is an example of _____ a. Coulomb damping b. Hysteresis damping c. Viscous damping d. Dry friction damping

Last Answer : c. Viscous damping

The hysteresis and eddy current losses of a single phase transformer working on 200 V, 50 Hz

Description : The hysteresis and eddy current losses of a single phase transformer working on 200 V, 50 Hz supply are Ph and Pe respectively. The percentage decrease in these when operated on a 160 V, 40 Hz supply are   (a) 32, 36 (b) 20, 36 (c) 25, 50 (d) 40, 80 

Last Answer : The hysteresis and eddy current losses of a single phase transformer working on 200 V, 50 Hz supply are Ph and Pe respectively. The percentage decrease in these when operated on a 160 V, 40 Hz supply are 20, 36

No eddy current and hysteresis losses occur in

Last Answer : No eddy current and hysteresis losses occur in Electrostatic instruments.

Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Description : Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Last Answer : (D) All the above.