The conductivity of copper is less than that of silver by (A) 5 – 10 %. (B) 50 – 60 %. (C) 80 – 90 %. (D) 20 – 30 %.

The conductivity of copper is less than that of silver by
(A) 5 – 10 %. (B) 50 – 60 %.
(C) 80 – 90 %. (D) 20 – 30 %.
by

1 Answer

Answer :

(A) 5 – 10 %.
by

Related questions

Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Description : The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Last Answer : (C) Silver.

Bronze is an alloy of (A) copper. (B) aluminium. (C) silver. (D) carbon.

Description : Bronze is an alloy of (A) copper. (B) aluminium. (C) silver. (D) carbon.

Last Answer : (A) copper.

The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Description : The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Last Answer : (B) increases with temperature.

The property due to which the resistance of some metal or compound vanishes under certain conditions is (A) Semi conductivity. (B) Super conductivity. (C) Curie point. (D) Magnetostriction.

Description : The property due to which the resistance of some metal or compound vanishes under certain conditions is (A) Semi conductivity. (B) Super conductivity. (C) Curie point. (D) Magnetostriction.

Last Answer : (B) Super conductivity.

Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Description : The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Last Answer : Answer: Option B

Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Description : The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Last Answer : (A) 0.08 to 0.3 %

The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

Description : The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

Last Answer : (B) silver.

Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Description : Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Last Answer : (B) low resistivity conducting materials.

Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Description : Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Last Answer : (A) Copper and Tin.

Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Description : Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Last Answer : (C) Tungsten.

The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Description : The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Last Answer : (B) Nichrome.

Copper is completely miscible with (A) nickel. (B) gold. (C) hydrogen. (D) lead.

Description : Copper is completely miscible with (A) nickel. (B) gold. (C) hydrogen. (D) lead.

Last Answer : (B) gold.

Manganin is an alloy of (A) copper, manganese and nickel. (B) copper and manganese. (C) manganese and nickel. (D) manganese, aluminium and nickel.

Description : Manganin is an alloy of (A) copper, manganese and nickel. (B) copper and manganese. (C) manganese and nickel. (D) manganese, aluminium and nickel.

Last Answer : (A) copper, manganese and nickel.

Brass is an alloy of (A) copper and zinc. (B) copper and iron. (C) copper and Aluminium. (D) copper and tin.

Description : Brass is an alloy of (A) copper and zinc. (B) copper and iron. (C) copper and Aluminium. (D) copper and tin.

Last Answer : (A) copper and zinc.

Large scale integration chips have between (A) Less than 10 components. (B) 10 and 100 components. (C) 100 and 1000 components. (D) More than 1000 components.

Description : Large scale integration chips have between (A) Less than 10 components. (B) 10 and 100 components. (C) 100 and 1000 components. (D) More than 1000 components.

Last Answer : (C) 100 and 1000 components.

The dielectric strength of transformer oil should be (A) 100 V. (B) 5 KV. (C) 30 KV. (D) 132 KV.

Description : The dielectric strength of transformer oil should be (A) 100 V. (B) 5 KV. (C) 30 KV. (D) 132 KV.

Last Answer : (C) 30 KV.

Consider a uniprocessor system where new processes arrive at an average of five processes per minute and each process needs an average of 6 seconds of service time. What will be the CPU utilization ? (A) 80 % (B) 50 % (C) 60 % (D) 30 %

Description : Consider a uniprocessor system where new processes arrive at an average of five processes per minute and each process needs an average of 6 seconds of service time. What will be the CPU utilization ? (A) 80 % (B) 50 % (C) 60 % (D) 30 %

Last Answer : (B) 50 %

A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

Description : A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

Last Answer : (A) High resistance.

The relative permeability of a paramagnetic substance is (A) unity. (B) slightly more than unity. (C) zero. (D) less than unity.

Description : The relative permeability of a paramagnetic substance is (A) unity. (B) slightly more than unity. (C) zero. (D) less than unity.

Last Answer : (B) slightly more than unity.

The dielectric constant of air is practically taken as (A) more than unity. (B) unity. (C) less than unity. (D) zero.

Description : The dielectric constant of air is practically taken as (A) more than unity. (B) unity. (C) less than unity. (D) zero.

Last Answer : (B) unity.

Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Description : Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Last Answer : (c) Rs. 1,70,000

Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn

Description : Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn

Last Answer : A) 60-70% Cu and 30-40% Zn

In plain sedimentation tanks under normal conditions, impurities are removed upto (A) 60 % (B) 70 % (C) 80 % (D) 90 %

Description : In plain sedimentation tanks under normal conditions, impurities are removed upto  (A) 60 %  (B) 70 %  (C) 80 %  (D) 90 %

Last Answer : (B) 70 % 

The incomes of A and B are in the ratio 1 : 2 and their expenditures are in the ratio 2 : 5. If A saves Rs 20,000 and B saves Rs 35,000, what is the total income of A and B? A) Rs 30,000 B) Rs 70,000 C) Rs 90,000 D) Rs 60,000 E) Rs 80,000

Description : The incomes of A and B are in the ratio 1 : 2 and their expenditures are in the ratio 2 : 5. If A saves Rs 20,000 and B saves Rs 35,000, what is the total income of A and B? A) Rs 30,000 B) Rs 70,000 C) Rs 90,000 D) Rs 60,000 E) Rs 80,000

Last Answer : Answer: C Income of A = x, of B = 2x Expenditure of A = 2y, of B = 5y Savings is (income – expenditure). So x – 2y = 20,000 2x – 5y = 35,000 Solve the equations, x = 30,000 So total = x+2x = 3x = 3*30,000 = 90,000

A software project was estimated at 352 Function Points (FP). A four person team will be assigned to this project consisting of an architect, two programmers, and a tester. The salary of the architect is Rs.80,000 per month, the programmer Rs.60,000 per month and the tester Rs.50,000 per month. The average productivity for the team is 8 FP per person month. Which of the following represents the projected cost of the project? (1) Rs.28,16,000 (2) Rs.20,90,000 (3) Rs.26,95,000 (4) Rs.27,50,000

Description : A software project was estimated at 352 Function Points (FP). A four person team will be assigned to this project consisting of an architect, two programmers, and a tester. The salary of the architect is Rs.80,000 per month, the ... ) Rs.28,16,000 (2) Rs.20,90,000 (3) Rs.26,95,000 (4) Rs.27,50,000

Last Answer : (4) Rs.27,50,000 

Octane number of petrol normally used in petrol engines is of the order of a. 20-30 b. 40-60 c. 60-70 d. 80-90

Description : Octane number of petrol normally used in petrol engines is of the order of a. 20-30 b. 40-60 c. 60-70 d. 80-90

Last Answer : ANSWER d. 80-90

The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Description : The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Last Answer : Answer : D

The total Glucose in the body is ________ gms. (A) 10–15 (B) 20–30 (C) 40–50 (D) 60–80

Description : The total Glucose in the body is ________ gms. (A) 10–15 (B) 20–30 (C) 40–50 (D) 60–80

Last Answer : B

In the total proteins, the percentage of albumin is about (A) 20–40 (B) 30–45 (C) 50–70 (D) 80–90

Description : In the total proteins, the percentage of albumin is about (A) 20–40 (B) 30–45 (C) 50–70 (D) 80–90

Last Answer : Answer : C

A discount of 25% on one article is same as a discount of 50% on another article .The costs of two article can be: A. Rs 30, Rs 20 B. Rs 90, Rs 40 C. Rs 80, Rs 40 D. Rs 50, Rs 40

Description : A discount of 25% on one article is same as a discount of 50% on another article .The costs of two article can be: A. Rs 30, Rs 20 B. Rs 90, Rs 40 C. Rs 80, Rs 40 D. Rs 50, Rs 40

Last Answer : Answer – C. Rs 80, Rs 40 Explanation – Let the costs of the two articles be x and y. Then, 25% of x = 50% of y => x/y = 50/25 = 2/1 So,x and y must be in the ratio of 2:1

Degree of saturation of a natural soil deposit having water content 15%, specific gravity 2.50 and void ratio 0.5, is (A) 50 % (B) 60 % (C) 75 % (D) 80 %

Description : Degree of saturation of a natural soil deposit having water content 15%, specific gravity 2.50 and void ratio 0.5, is (A) 50 % (B) 60 % (C) 75 % (D) 80 %

Last Answer : (C) 75 %

The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Description : The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Last Answer : D) Covalent

What is a modular system? List the important properties of a modular system.

Description : What is a modular system? List the important properties of a modular system.

Last Answer : Ans: A modular system consists of well defined manageable units to well defined interfaces among them. Desirable properties are Each module is a well defined subsystem useful to others Each module ... modules Modules should be easier to use than build Modules should have a simple interface

State the functions of a fuse. Mention the desirable properties of fuse materials.

Description : State the functions of a fuse. Mention the desirable properties of fuse materials.

Last Answer : Ans: Fuse is a protective device, which consists of a thin wire or strip. This wire or strip is placed with the circuit it has to protect, so that the circuit-current flows through it. When ... silver and silver alloys are used of lower ratings. Copper alloys are used in fuses of higher ratings.

Give four examples of natural insulating materials.

Description : Give four examples of natural insulating materials.

Last Answer : Ans: Examples of the natural insulating materials are cotton, rubber, wood, mica.

Classify plastic materials into two categories, describe their important properties and give two examples of each.

Description : Classify plastic materials into two categories, describe their important properties and give two examples of each.

Last Answer : Ans: Plastic materials can be classified into thermoplastic and thermosetting plastics. Thermoplastic materials:- The properties of these plastic materials do not change considerably if they are melted ... forming elastic threads and films. Examples are Phenol formaldehyde (Bakelite), Epoxy resins.

Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Description : Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Last Answer : (D) All the above.

Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Last Answer : (B) Resistivity

Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Description : Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Last Answer : (D) Brass.

Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Description : Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Last Answer : (A) Negative

Atoms with four valence electrons are good conductors. (A) True (B) False

Description : Atoms with four valence electrons are good conductors. (A) True (B) False

Last Answer : (B) False

Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Description : Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Last Answer : (D) Grain orientation of material.

Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Description : Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Last Answer : (C) A large energy gap.

Paper is hygroscopic and absorbent. (A) True (B) False

Description : Paper is hygroscopic and absorbent. (A) True (B) False

Last Answer : (A) True

In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Description : In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Description : Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Last Answer : (A) provide path to magnetic flux.