Feedback factor at the frequency of oscillation of a Wien bridge oscillator is:

Feedback factor at the frequency of oscillation of a Wien bridge oscillator is: 

(1) 3 (2) 1/3 (3) 1/29 (4) 3/29
by

1 Answer

Answer :

Feedback factor at the frequency of oscillation of a Wien bridge oscillator is: 1/3.

by

Related questions

A Wien Bridge Oscillator is suitable for

Description : A Wien Bridge Oscillator is suitable for  1. Audio frequency applications 2. Radio frequency applications 3. Very low frequency applications Which of the above frequency applications is/are correct ?

Last Answer : A Wien Bridge Oscillator is suitable for Audio frequency applications

In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in

Description : In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in MHz will be (a) 2.37 MHz (b) 10.00 MHz (c) 11.54 MHz (d) 9.09 MHz 

Last Answer : c

Which of the following bridge is frequency sensitive: a) Wheatstone bridge b) Maxwell bridge c) Anderson bridge d) Wien bridge

Description : Which of the following bridge is frequency sensitive: a) Wheatstone bridge b) Maxwell bridge c) Anderson bridge d) Wien bridge

Last Answer : Ans: C

One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency oscillation. A. Heating and expansion of oscillator coil B. DC and RF ac heating of resistors which cause change in values C. Heating of capacitor in the oscillatorD. Loose connections in the oscillator, amplifier, or antenna circuits.

Description : One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency ... capacitor in the oscillator D. Loose connections in the oscillator, amplifier, or antenna circuits.

Last Answer : D. Loose connections in the oscillator, amplifier, or antenna circuits.

Positive feedback is used in 1. Amplifier 2. Rectifier 3.Oscillator 4. Detector

Description : Positive feedback is used in 1. Amplifier 2. Rectifier 3.Oscillator 4. Detector 

Last Answer : Positive feedback is used in 1. Amplifier 2. Rectifier 3.Oscillator 4. Detector 

A Wien bridge is used to measure

Description : A Wien bridge is used to measure (A) quality factor of a coil (B) audio frequency of a signal (C) capacitance of a capacitor (D) inductance of a coil 

Last Answer : D)  Inductance of a coil

Which of the following is true with respect to Wien Bridge?

Description : Which of the following is true with respect to Wien Bridge? A) It does not require equal values of R or C  B) It requires that R and C values of all components must be equal C) It requires that all resistors should have equal values D) None of these

Last Answer : Which of the following is true with respect to Wien Bridge? A) It does not require equal values of R or C  B) It requires that R and C values of all components must be equal C) It requires that all resistors should have equal values D) None of these

Wien bridge is useful for measuring

Last Answer : Wien bridge is useful for measuring High frequency.

Maxwell-Wien bridge is used to measure

Last Answer : Maxwell-Wien bridge is used to measure Inductance.

Assertion (A) : Wein bridge oscillator is generally used as a variable audio frequency oscillator Reason (R) :

Description : Assertion (A) : Wein bridge oscillator is generally used as a variable audio frequency oscillator Reason (R) : by using either capacitor (or) resistor in one of the arms of the bridge, the frequency of a wein bridge oscillator ... C) (A) is true but (R) is false (D) (A) is false but (R) is true

Last Answer : Assertion (A) : Wein bridge oscillator is generally used as a variable audio frequency oscillator Reason (R) : by using either capacitor (or) resistor in one of the arms of the bridge, the frequency of a wein bridge oscillator ... ) (A) is true but (R) is false (D) (A) is false but (R) is true

If the length of a pendulum is doubled, its frequency of oscillation is changed by a factor of (a) 2 (b) √2 (c) 1/2 (d) 1/4

Description : If the length of a pendulum is doubled, its frequency of oscillation is changed by a factor of (a) 2 (b) √2 (c) 1/2 (d) 1/4

Last Answer : Ans:(c)

The frequency stability of the oscillator output is maximum in _____.

Description : The frequency stability of the oscillator output is maximum in _____.   (a) Crystal oscillator (b) Phase shift oscillator (c) LC oscillator (d) Wien bridge oscillator 

Last Answer : The frequency stability of the oscillator output is maximum in Crystal oscillator. 

The crystal oscillator frequency is very stable due to

Last Answer : The crystal oscillator frequency is very stable due to High Q of the crystal.

Which of the following best describes a dip-meter? A. An SWR meter B. A counter C. A variable LC oscillator with metered feedback current D. A field strength meter

Description : Which of the following best describes a dip-meter? A. An SWR meter B. A counter C. A variable LC oscillator with metered feedback current D. A field strength meter

Last Answer : C. A variable LC oscillator with metered feedback current

Best described a dip-meter. A. A variable LC oscillator with metered feedback current B. An SWR meter C. A counter D. A field strength meter

Description : Best described a dip-meter. A. A variable LC oscillator with metered feedback current B. An SWR meter C. A counter D. A field strength meter

Last Answer : A. A variable LC oscillator with metered feedback current

The major function of transistor. Q2 is A) It provides voltage gain B) It provides the feedback signal C) It isolates the oscillator from loading effects D) It provides a phase shift.

Description : The major function of transistor. Q2 is A) It provides voltage gain B) It provides the feedback signal C) It isolates the oscillator from loading effects D) It provides a phase shift.

Last Answer : ) It provides a phase shift.

Which of the following is not true: A) An oscillator is a circuit that converts DC to AC B) An oscillator is an amplifier that supplies its own input signal C) All oscillators generate sine waves D) In phase feedback is called positive Feedback

Description : Which of the following is not true: A) An oscillator is a circuit that converts DC to AC B) An oscillator is an amplifier that supplies its own input signal C) All oscillators generate sine waves D) In phase feedback is called positive Feedback

Last Answer : C) All oscillators generate sine waves

Which components provide the regenerative feedback signal in the phase-shift oscillator?

Description : Which components provide the regenerative feedback signal in the phase-shift oscillator?

Last Answer : Resistor-capacitor networks.

Which oscillator uses tapped capacitors for feedback?

Description : Which oscillator uses tapped capacitors for feedback?

Last Answer : Colpitts.

Which oscillator uses a tapped inductor for feedback?

Description : Which oscillator uses a tapped inductor for feedback?

Last Answer : Hartley.

Which oscillator uses a tickler coil for feedback?

Description : Which oscillator uses a tickler coil for feedback?

Last Answer : Armstrong.

State type of feedback used for oscillator circuit. Explain Barkhausen criteria.

Description : State type of feedback used for oscillator circuit. Explain Barkhausen criteria.

Last Answer : Concept of feedback: Feedback is process to fed back part of output to the input. Feed back concept is introduced in amplifier to improve the parameters of amplifier like voltage gain, current gain ... signal  d) Voltage shunt: Output signal is voltage signal, feedback signal is current signal. 

An oscillator that uses a tapped coil to obtain the feedback is called:

Description : An oscillator that uses a tapped coil to obtain the feedback is called: a. A Hartley circuit b. A Pierce circuit c. A multivibrator d. A negative feedback circuit

Last Answer : An oscillator that uses a tapped coil to obtain the feedback is called: a. A Hartley circuit b. A Pierce circuit c. A multivibrator d. A negative feedback circuit 

In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor

Description : In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor of the crystal resonator is  (a) > 100 (b) > 500 (c) > 1000 (d) > 20000

Last Answer : In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor of the crystal resonator is  > 1000

When a person sitting on a swing stands up on the swing, the frequency of oscillation – (1) decreases (2) increases (3) becomes infinite (4) does not change

Description : When a person sitting on a swing stands up on the swing, the frequency of oscillation – (1) decreases (2) increases (3) becomes infinite (4) does not change

Last Answer : (2) increases Explanation: In Simple Harmonic Motion, the frequency of the oscillation (1) is the number of oscillations per second which is expressed as f = 1/T where T is the time period (the time for the oscillator to complete one cycle).

A spring mass system has time period of oscillation of 0.25 sec. What will be the natural frequency of the system? A 1 Hz B 2 rad sec C 4 rad/sec D 4 Hz

Description : A spring mass system has time period of oscillation of 0.25 sec. What will be the natural frequency of the system? A 1 Hz B 2 rad sec C 4 rad/sec D 4 Hz

Last Answer : D 4 Hz

The period of oscillation of a particle undergoing simple harmonic motion is: w) independent of the amplitude of the motion x) directly proportional to the frequency of oscillation y) independent of the frequency of oscillation z) none of the above

Description : The period of oscillation of a particle undergoing simple harmonic motion is: w) independent of the amplitude of the motion x) directly proportional to the frequency of oscillation y) independent of the frequency of oscillation z) none of the above

Last Answer : ANSWER: W -- INDEPENDENT OF THE AMPLITUDE OF THE MOTION 

When a person sitting on a swing stands up on the swing, the frequency of oscillation (1) decreases (2) increases (3) becomes infinite (4) does not change

Description : When a person sitting on a swing stands up on the swing, the frequency of oscillation (1) decreases (2) increases (3) becomes infinite (4) does not change

Last Answer : increases

Frequency of oscillation of an AMV depends upon

Description : Frequency of oscillation of an AMV depends upon  1. RC values of the circuit 2. Collector load resistors 3. Transistor 4. Width of input pulse 

Last Answer : Frequency of oscillation of an AMV depends upon RC values of the circuit 

Good and not expensive restaurant in Wien?

Description : Good and not expensive restaurant in Wien?

Last Answer : answer:Palmenhaus In the Burggarten Main courses 15€-18€ ($24—$29) Café Restaurant Halle In the Kunsthalle Wien, in the MuseumsQuartier Main courses 8€-17€ ($13—$27) New York Times

If the length of a simple pendulum is halved then its period of oscillation is - (1) doubled (2) halved (3) increased by a factor √ 2 (4) decreased by a factor √ 2

Description : If the length of a simple pendulum is halved then its period of oscillation is - (1) doubled (2) halved (3) increased by a factor √ 2 (4) decreased by a factor √ 2

Last Answer : (4) decreased by a factor √ 2

If the length of a simple pendulum is halved then its period of oscillation is (1) doubled (2) halved (3) increased by a factor 2 (4) decreased by a factor 2

Description : If the length of a simple pendulum is halved then its period of oscillation is (1) doubled (2) halved (3) increased by a factor root 2 (4) decreased by a factor root  2

Last Answer : decreased by a factor root 2

Which of the following is a negative-resistance microwave device for oscillator applications?

Description :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

Last Answer :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

The basic Hartley oscillator uses:

Description : The basic Hartley oscillator uses: (1) One inductor and two capacitors (2) A centre tapped inductor and a capacitor (3) Two capacitors (4) Tickler coil 

Last Answer : The basic Hartley oscillator uses: A centre tapped inductor and a capacitor

A Hartley Oscillator is used for generating

Description : A Hartley Oscillator is used for generating (A) very low frequency Oscillation (B) radio-frequency Oscillation (C) microwave Oscillation (D) audio-frequency Oscillation

Last Answer : A Hartley Oscillator is used for generating radio-frequency Oscillation

An Oscillator produces - - - oscillations

Last Answer : An Oscillator produces Undamped oscillations

If Relay #5 changed contact position grounding the 'auto' input to the 'pitch controller module', pitch control would be effected by the _________________. EL-0095 A. pitch feedback potentiometer B. Engine room thrust split potentiometer C. Engine room thrust lever only D. Bridge thrust lever only

Description : If Relay #5 changed contact position grounding the 'auto' input to the 'pitch controller module', pitch control would be effected by the _________________. EL-0095 A. pitch feedback potentiometer B. Engine room thrust split potentiometer C. Engine room thrust lever only D. Bridge thrust lever only

Last Answer : Answer: B

What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Description : What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Last Answer : C. 2225 MHz

When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Description : When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Last Answer : D. final RF stage

An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Last Answer : D. 99.7 MHz

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Description : How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Last Answer : C. Use of regulated power supply

One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the high power output. The purpose of which is to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Description : One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the ... to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Last Answer : B. MOPA

Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections B. Power supply voltage changes C. Loose connections in the oscillator, amplifier, or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Description : Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections ... , or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Last Answer : D. DC and RF heating of resistors, causing then to change values.

Refer to the deviation of the operating frequency of a crystal oscillator from its nominal value due to temperature variations. A. Drift B. Flash over C. Frequency deviation D. Deviation ratio

Description : Refer to the deviation of the operating frequency of a crystal oscillator from its nominal value due to temperature variations. A. Drift B. Flash over C. Frequency deviation D. Deviation ratio

Last Answer : A. Drift

What is the local oscillator frequency range commercial AM broadcast if it is equal to 455 KHz. A. 540 to 1600 KHz B. 0 to 1600 KHz C. 995 to 2055 KHz D. 0 to 455 KHz

Description : What is the local oscillator frequency range commercial AM broadcast if it is equal to 455 KHz. A. 540 to 1600 KHz B. 0 to 1600 KHz C. 995 to 2055 KHz D. 0 to 455 KHz

Last Answer : C. 995 to 2055 KHz

ECE Board Exam March 1996 What is the purpose of a beat frequency oscillator (BFO)? A. Aid in the reception of weak voice-modulated signals B. Generates a signal, whose frequency is the same as that of the intermediate frequency C. Generates a 1kHz note for Morse code reception D. Generates an output, whose frequency differs from that of the intermediate frequency by 1 kHz

Description : ECE Board Exam March 1996 What is the purpose of a beat frequency oscillator (BFO)? A. Aid in the reception of weak voice-modulated signals B. Generates a signal, whose frequency is the ... reception D. Generates an output, whose frequency differs from that of the intermediate frequency by 1 kHz

Last Answer : C. Generates a 1kHz note for Morse code reception

For an under damped harmonic oscillator, resonance A Occurs when excitation frequency is greater than undamped natural frequency B Occurs when excitation frequency is less than undamped natural frequency C Occurs when excitation frequency is equal to undamped natural frequency D Never occurs

Description : For an under damped harmonic oscillator, resonance A Occurs when excitation frequency is greater than undamped natural frequency B Occurs when excitation frequency is less than undamped natural frequency C Occurs when excitation frequency is equal to undamped natural frequency D Never occurs

Last Answer : C Occurs when excitation frequency is equal to undamped natural frequency

For an under damped harmonic oscillator, resonance a) occurs when excitation frequency is greater than undamped natural frequency b) occurs when excitation frequency is less than undamped natural frequency c) occurs when excitation frequency is equal to undamped natural frequency d) never occurs

Description : For an under damped harmonic oscillator, resonance a) occurs when excitation frequency is greater than undamped natural frequency b) occurs when excitation frequency is less than undamped natural frequency c) occurs when excitation frequency is equal to undamped natural frequency d) never occurs

Last Answer : c) occurs when excitation frequency is equal to undamped natural frequency

For an underdamped harmonic oscillator, resonance ______. (A) occurs when excitation frequency is greater than the undamped natural frequency (B) occurs when excitation frequency is less than the undamped natural frequency (C) occurs when excitation frequency is equal to the undamped natural frequency (D) never occurs

Description : For an underdamped harmonic oscillator, resonance ______. (A) occurs when excitation frequency is greater than the undamped natural frequency (B) occurs when excitation frequency is less than the ... ) occurs when excitation frequency is equal to the undamped natural frequency (D) never occurs

Last Answer : (C) occurs when excitation frequency is equal to the undamped natural frequency