An Oscillator produces - - - oscillations

by

1 Answer

Answer :

An Oscillator produces Undamped oscillations

by

Related questions

Oscillator Produces _____________:

Description : Oscillator Produces _____________: A. voltage B. phase difference C. frequency D. current 

Last Answer : Oscillator Produces frequency.

Which of the following is a negative-resistance microwave device for oscillator applications?

Description :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

Last Answer :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

The basic Hartley oscillator uses:

Description : The basic Hartley oscillator uses: (1) One inductor and two capacitors (2) A centre tapped inductor and a capacitor (3) Two capacitors (4) Tickler coil 

Last Answer : The basic Hartley oscillator uses: A centre tapped inductor and a capacitor

In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in

Description : In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in MHz will be (a) 2.37 MHz (b) 10.00 MHz (c) 11.54 MHz (d) 9.09 MHz 

Last Answer : c

Positive feedback is used in 1. Amplifier 2. Rectifier 3.Oscillator 4. Detector

Description : Positive feedback is used in 1. Amplifier 2. Rectifier 3.Oscillator 4. Detector 

Last Answer : Positive feedback is used in 1. Amplifier 2. Rectifier 3.Oscillator 4. Detector 

The frequency stability of the oscillator output is maximum in _____.

Description : The frequency stability of the oscillator output is maximum in _____.   (a) Crystal oscillator (b) Phase shift oscillator (c) LC oscillator (d) Wien bridge oscillator 

Last Answer : The frequency stability of the oscillator output is maximum in Crystal oscillator. 

A Hartley Oscillator is used for generating

Description : A Hartley Oscillator is used for generating (A) very low frequency Oscillation (B) radio-frequency Oscillation (C) microwave Oscillation (D) audio-frequency Oscillation

Last Answer : A Hartley Oscillator is used for generating radio-frequency Oscillation

Feedback factor at the frequency of oscillation of a Wien bridge oscillator is:

Description : Feedback factor at the frequency of oscillation of a Wien bridge oscillator is:  (1) 3 (2) 1/3 (3) 1/29 (4) 3/29

Last Answer : Feedback factor at the frequency of oscillation of a Wien bridge oscillator is: 1/3.

The crystal oscillator frequency is very stable due to

Last Answer : The crystal oscillator frequency is very stable due to High Q of the crystal.

Who discovers neutrino oscillations ?

Description : Who discovers neutrino oscillations ?

Last Answer : Neutrino oscillation was discovered by scientist Takaki Kazita.

A student measures time for 20 oscillations of a simple pendulum as 30 s. 32 s, 35 s and 31 s. 1f the minimum division in the measuring clock

Description : A student measures time for 20 oscillations of a simple pendulum as 30 s. 32 s, 35 s and 31 s. 1f the minimum division in the measuring clock

Last Answer : A student measures time for 20 oscillations of a simple pendulum as 30 s. 32 s, 35 s and 31 s. 1f the minimum ... 1 (C) 32 2 (D) 32 5

Comparing L-C oscillation with the oscillation if spring-block-system, match the following table. Comparing L-C oscillations with the oscillations of

Description : Comparing L-C oscillation with the oscillation if spring-block-system, match the following table. Comparing L-C oscillations with the oscillations of

Last Answer : Comparing L-C oscillation with the oscillation if spring-block-system, match the following table. Comparing L-C ... ,x),(,,,(T),"None"):}`

What are the conditions for oscillations?

Description : What are the conditions for oscillations?

Last Answer : There are three conditions. These include positive feedback, thephase near the circuit needs to be either 36 or zero degrees, andthe loop gain should be equal or greater than 1.

For short-term climatic predictions, which one of the following events, detected in the last decade, is associated with occasional weak monsoon rains in the Indian subcontinent? [IAS 2002] (a) La Nina (b) Movement of jet streams (c) El Nino and southern oscillations (d) Green-house effect on global level

Description : For short-term climatic predictions, which one of the following events, detected in the last decade, is associated with occasional weak monsoon rains in the Indian subcontinent? [IAS 2002] (a) La Nina ( ... of jet streams (c) El Nino and southern oscillations (d) Green-house effect on global level

Last Answer : Ans: (c)

A control system with excessive noise, is likely to suffer from (a) saturation in amplifying stages (b) loss of gain (c) vibrations (d) oscillations

Description : A control system with excessive noise, is likely to suffer from (a) saturation in amplifying stages (b) loss of gain (c) vibrations (d) oscillations

Last Answer : Ans: A

The second derivative input signals modify which of the following? a) The time constant of the system b) Damping of the system c) The time constant and suppress the oscillations d) The gain of the system

Description : The second derivative input signals modify which of the following? a) The time constant of the system b) Damping of the system c) The time constant and suppress the oscillations d) The gain of the system

Last Answer : Ans: C

Which of the following phenomena is supposedly associated with global warming? (1) Southern Oscillations (2) El Nino (3) La Nino (4) El Nino Modiki

Description : Which of the following phenomena is supposedly associated with global warming? (1) Southern Oscillations (2) El Nino (3) La Nino (4) El Nino Modiki

Last Answer : (4) El Nino Modiki Explanation: El Nino Modiki is associated with global warming.

When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Description : When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Last Answer : D. internal receiver noise.

Vibrations in the tubes of a shell and tube heat exchanger is induced due to the (A) Flow of fluid on the tube and shell sides (B) Oscillations in the flow of shell/tube sides fluid (C) Vibrations transmitted through piping and/or supports due to external reasons (D) All (A), (B) and (C)

Description : Vibrations in the tubes of a shell and tube heat exchanger is induced due to the (A) Flow of fluid on the tube and shell sides (B) Oscillations in the flow of shell/tube sides fluid (C) Vibrations ... piping and/or supports due to external reasons (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The rate of decay of oscillations is known as....... A. critical damping B. damping coefficient C. transmissibility D. logarithmic decrement

Description : The rate of decay of oscillations is known as....... A. critical damping B. damping coefficient C. transmissibility D. logarithmic decrement

Last Answer : D. logarithmic decrement

Negative damping leads to a. instability b. fast convergence c. oscillations

Description : Negative damping leads to a. instability b. fast convergence c. oscillationsNegative damping leads to a. instability b. fast convergence c. oscillations

Last Answer : a. instability

Magnitude of earthquake indicates amount of a) Vibrations per second b) Vibrations per minute c) Oscillations d) Energy released

Description : Magnitude of earthquake indicates amount of a) Vibrations per second b) Vibrations per minute c) Oscillations d) Energy released

Last Answer : d) Energy released

During secular variation of magnetic meridian at different places (A) Range of oscillations is constant (B) Period of oscillation is constant (C) Range and period of oscillation both vary (D) Period of oscillation only varies

Description : During secular variation of magnetic meridian at different places (A) Range of oscillations is constant (B) Period of oscillation is constant (C) Range and period of oscillation both vary (D) Period of oscillation only varies

Last Answer : (C) Range and period of oscillation both vary

What method is used to prevent oscillations in large synchro units?

Description : What method is used to prevent oscillations in large synchro units?

Last Answer : Mechanical damping.

What are the three requirements necessary for oscillations to exist in a circuit?

Description : What are the three requirements necessary for oscillations to exist in a circuit?

Last Answer : Amplification, regenerative feedback, and frequency-determining device.

What starts the oscillations in a negative-resistance magnetron?

Description : What starts the oscillations in a negative-resistance magnetron?

Last Answer : The application of the proper magnetic field.

A magnetron will produce oscillations when the electrons follow what type of path?

Description : A magnetron will produce oscillations when the electrons follow what type of path?

Last Answer : Circular.

What is Gibbs phenomenon? Or what are Gibbs oscillations?

Description : What is Gibbs phenomenon? Or what are Gibbs oscillations?

Last Answer : One possible way of finding an FIR filter that approximates H(ejw) would be to truncate the infinite Fourier series at n= + (N-1)/2. Abrupt truncation of the series will lead to oscillation both in pass band and in stop band. This phenomenon is known as Gibbs phenomenon.

For small oscillations, what happens to the period of a simple pendulum when the mass of the pendulum bob is doubled?

Description : For small oscillations, what happens to the period of a simple pendulum when the mass of the pendulum bob is doubled? 

Last Answer : ANSWER: NOTHING or PERIOD IS UNAFFECTED

Which of the following phenomena is supposedly associated with global warming ? (1) Southern Oscillations (2) El Nino (3) La Nino (4) El Nino Modiki

Description : Which of the following phenomena is supposedly associated with global warming ? (1) Southern Oscillations (2) El Nino (3) La Nino (4) El Nino Modiki

Last Answer : El Nino Modiki

State the Barkhausen criteria of oscillations

Description : State the Barkhausen criteria of oscillations

Last Answer : Barkhausen's Criteria - To obtain sustain oscillation the loop gain AB = 1 and phase shift of feedback signal should be 00 or 3600 of an amplifier. it is called as barkshausen's ...  Wien bridge oscillator LC Oscillator  Hartley oscilator  Colpitts oscillator  Crystal oscillator

An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak

Description : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Last Answer : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

The - - - gate has one or more high inputs, produces high output

Last Answer : The OR gate has one or more high inputs, produces high output

Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Description : Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Last Answer : answer:@XOIIO Probably a question you should direct to the company. The link below should help. http://www.vectron.com/contact/index.htm

WHAT ARE THE EFFECT OF PUTTING APALNT ON AN OSCILLATOR, WOULD IT DIE ?

Description : WHAT ARE THE EFFECT OF PUTTING APALNT ON AN OSCILLATOR, WOULD IT DIE ?

Last Answer : Need Answer

What is an oscillator ? What is an oscillator ?

Description : What is an oscillator ? What is an oscillator ?

Last Answer : Devices that can convert DC power to AC power at a certain frequency are called oscillators.

What is role of LC circuit in the hartley oscillator?

Description : What is role of LC circuit in the hartley oscillator?

Last Answer : Self-tuning feedback

When two semiconductors of p-and ntype are brought in contact, they form p-n junction which acts like a/an – (1) Conductor (2) Oscillator (3) Rectifier (4) Amplifier

Description : When two semiconductors of p-and ntype are brought in contact, they form p-n junction which acts like a/an – (1) Conductor (2) Oscillator (3) Rectifier (4) Amplifier

Last Answer : (3) Rectifier Explanation: P-n junction is a device which flows current in one direction when it is forward biased and when it is reverse biased it doesn't flow any current through it. So it ... (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction.

The device which converts AC to DC is (1) Oscillator (2) Amplifier (3) Rectifier (4) None of these

Description : The device which converts AC to DC is (1) Oscillator (2) Amplifier (3) Rectifier (4) None of these

Last Answer : (3) Rectifier Explanation: A rectifier is an electrical device that converts alternating current (AC). which periodically reverses direction, to direct current (DC), which flows in only one ... serving as components of DC power supplies and high-voltage direct current power transmission systems.

Alternating current is converted into direct current by a – (1) Transformer (2) Dynamo (3) Oscillator (4) Rectifier

Description : Alternating current is converted into direct current by a – (1) Transformer (2) Dynamo (3) Oscillator (4) Rectifier

Last Answer : (4) Rectifier Explanation: A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction. The process is known as rectification.

Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Description : Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Last Answer : D. To prevent re-radiation of the local oscillator

What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Description : What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Last Answer : C. 2225 MHz

Which of the following best describes a dip-meter? A. An SWR meter B. A counter C. A variable LC oscillator with metered feedback current D. A field strength meter

Description : Which of the following best describes a dip-meter? A. An SWR meter B. A counter C. A variable LC oscillator with metered feedback current D. A field strength meter

Last Answer : C. A variable LC oscillator with metered feedback current

When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Description : When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Last Answer : D. final RF stage

What establishes the receiver bandwidth? A. RF amplifier B. Mixer C. Local oscillator D. IF amplifier

Description : What establishes the receiver bandwidth? A. RF amplifier B. Mixer C. Local oscillator D. IF amplifier

Last Answer : D. IF amplifier

An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Last Answer : D. 99.7 MHz

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Description : How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Last Answer : C. Use of regulated power supply

What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna

Description : What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna

Last Answer : C. Local oscillator, mixer and RF amplifier

One of the FM signal generator control which varies the phase of the modulating voltage applied to the oscillator of the sweep generator A. Band control B. Phase control C. Marker amplitude control D. Sweep output control

Description : One of the FM signal generator control which varies the phase of the modulating voltage applied to the oscillator of the sweep generator A. Band control B. Phase control C. Marker amplitude control D. Sweep output control

Last Answer : B. Phase control