Capacitive transducers are normally used for : -

 Capacitive transducers are normally used for : - 

a) static measurements b) dynamic measurements c) both static and dynamic measurements d) transient measurements
by

1 Answer

Answer :

Capacitive transducers are normally used for : - dynamic measurements 

by

Related questions

The principle of operation used in capacitive transducers to measure level of liquid is change of

Description : The principle of operation used in capacitive transducers to measure level of liquid is change of (a) Area of plates (b) Dielectric strength (c) Distance between plates (d) Shape of plates

Last Answer : The principle of operation used in capacitive transducers to measure level of liquid is change of Dielectric strength

Piezo-electric transducers are: -

Description :  Piezo-electric transducers are: -  a) passive transducers b) active transducers c) inverse transducer d) active and inverse transducers

Last Answer :  Piezo-electric transducers are: -  active and inverse transducers

Sensors are the transducers that are used to____. a.Measure physical quantity b.Hold the objects c.Fix the objects d.None of the above

Description : Sensors are the transducers that are used to____. a.Measure physical quantity b.Hold the objects c.Fix the objects d.None of the above

Last Answer : a.Measure physical quantity

Various oncogens may encode all of the following except: (A) Carcinogens (B) Growth factors (C) Receptors for growth factors (D) Signal transducers for growth factors

Description : Various oncogens may encode all of the following except: (A) Carcinogens (B) Growth factors (C) Receptors for growth factors (D) Signal transducers for growth factors

Last Answer : Answer : A

G-proteins act as (A) Hormone carriers (B) Hormone receptors (C) Second messengers (D) Signal transducers

Description : G-proteins act as (A) Hormone carriers (B) Hormone receptors (C) Second messengers (D) Signal transducers

Last Answer : Answer : D

Repeaters inside communications satellites are known as A. Trancievers B. Transponders C. Transducers D. TWT

Description : Repeaters inside communications satellites are known as A. Trancievers B. Transponders C. Transducers D. TWT

Last Answer : B. Transponders

Sensors are the transducers that are used to____. (A) Measure physical quantity (B) Hold the objects (C) Fix the objects (D) None of the above

Description : Sensors are the transducers that are used to____. (A) Measure physical quantity (B) Hold the objects (C) Fix the objects (D) None of the above

Last Answer : A

Peroxisomes and Glyoxisomes are (A) Energy transducers (B) Membrane-less organelles (C) Micro bodies (D) Basal bodies

Description : Peroxisomes and Glyoxisomes are (A) Energy transducers (B) Membrane-less organelles (C) Micro bodies (D) Basal bodies

Last Answer : (C) Micro bodies

State the selection criteria for transducers

Description : State the selection criteria for transducers

Last Answer : 1. Operating range 2. Operating principle 3. Sensitivity 4. Accuracy 5. Frequency response and resonant frequency 6. Errors 7. Environmental compatibility 8. Usage and ruggedness. 9. ... . 10. Stability and Reliability 11. Loading effect 12. Static characteristics 13. Noise immunity

Define active and passive transducers.

Description : Define active and passive transducers. 

Last Answer : 1. Active Transducer: - These transducers do not need any external source of power for their operation. Therefore, they are also called as self-generating type transducers. The active ... need external source of power for their operation. So they are not self-generating type transducers. 

Differentiate between active and passive transducers

Description : Differentiate between active and passive transducers

Last Answer : Active Transducer:- A transducer which do not requires external energy source to convert signal from one form to another. Active transducers passes gain. e.g. Thermometer,Thermocuople, bourdon tubes, ... other form. Passive transducer passes loss. e.g. Thermistor, strain gauges, LVDT etc .

Describe any four selection criterion of transducers.

Description : Describe any four selection criterion of transducers.

Last Answer : 1. Operating range :Range is specified user or manufacturer 2. Operating principle : Depend on principle measurement 3. Sensitivity: it must sensitive to small variation in input. 4. ... 10. Stability and Reliability 11. Loading effect 12. Static characteristics 13. General selection criteria

State two advantages of electrical transducers.

Description : State two advantages of electrical transducers.

Last Answer : Advantages of electrical transducers- 1) The electrical systems can be controlled with a very small level of power. 2) The electrical output can be easily used, transmitted and processed for the ... can be indicated and recorded remotely from the sensing element. 4) Friction effect is minimized.

Classify the temperature measuring transducers.

Description : Classify the temperature measuring transducers. 

Last Answer : 1.Expansion thermometers:  Bimetallic thermometers Bimetal Helix Thermometer Spiral Bimetallic thermometers  2. Filled system thermometers:  Liquid filled thermometers Gas filled ... Thermocouples  4. Pyrometers:  Radiation Pyrometers Infrared Pyrometers Optical Pyrometers

Which of the following transducers can be used for non-contact temperature measurement?

Description : Which of the following transducers can be used for non-contact temperature measurement? A) Resistance temperature detector B) Thermistor C) Sensistor D) Pyrometer 

Last Answer : Which of the following transducers can be used for non-contact temperature measurement? A) Resistance temperature detector B) Thermistor C) Sensistor D) Pyrometer 

Consider the following transducers : 1. LVDT 2. Piezoelectric 3. Thermocouple 4. Photovoltaic cell

Description : Consider the following transducers : 1. LVDT 2. Piezoelectric 3. Thermocouple 4. Photovoltaic cell  Which of the above are active transducers ?

Last Answer : Consider the following transducers : 1. LVDT 2. Piezoelectric 3. Thermocouple 4. Photovoltaic cell Which of the above are active transducers ? 2, 3 and 4

Can I use a WACOM stylus with any capacitive touchscreen tablet?

Description : Can I use a WACOM stylus with any capacitive touchscreen tablet?

Last Answer : answer:As far as just tablets go, the HTC Flyer has this feature – I don’t think it’s as well implemented as it is on the actual Wacom tablets, but at the moment it’s the closest to what you describe. The other thing to consider is a Tablet-PC, although in my experience these are clunky as hell.

What is the power factor in pure resistive , capacitive , inductive load ?

Description : What is the power factor in pure resistive , capacitive , inductive load ?

Last Answer : Answer : Power factor cosΦ = 1 in pure resistive load, cosΦ = 0 in capacitive load , cosΦ = 0 in inductive load .

What is the expression of capacitive reactance ?

Description : What is the expression of capacitive reactance ?

Last Answer : Capacitive reactance = XC

Capacitive Load What ?

Last Answer : yes Load Charge Savings By Or Power Factor Of The value Increases Him Capacitive Load Says Capacitive Load That Current Flowing Is So Capacitive Current.

What is the capacitive resistance of a 0.04 microfarad capacitor in ac circuit that has a frequency of 1000 hz?

Description : What is the capacitive resistance of a 0.04 microfarad capacitor in ac circuit that has a frequency of 1000 hz?

Last Answer : The capacitive reactance is approximately 4 kΩ .

The electrical diagram shown in the illustration is used to depict a/an ____________. EL-0015 A. resistance circuit B. inductive circuit C. stepdown circuit D. capacitive circuit

Description : The electrical diagram shown in the illustration is used to depict a/an ____________. EL-0015 A. resistance circuit B. inductive circuit C. stepdown circuit D. capacitive circuit

Last Answer : Answer: D

An AC circuit has a capacitive reactance of 30 ohms in addition to an inductive reactance of 40 ohms connected in series. What is the reactance of the circuit? A. 8.37 ohms B. 10.00 ohms C. 50.00 ohms D. 70.00 ohms

Description : An AC circuit has a capacitive reactance of 30 ohms in addition to an inductive reactance of 40 ohms connected in series. What is the reactance of the circuit? A. 8.37 ohms B. 10.00 ohms C. 50.00 ohms D. 70.00 ohms

Last Answer : Answer: B

In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter B. help the windings to cool to ambient temperature C. release any residual capacitive charge from the windings D. help the windings to cool to the same temperature as the ground test connection

Description : In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter ... the windings D. help the windings to cool to the same temperature as the ground test connection

Last Answer : Answer: C

The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual magnetism C. kept warm by using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Description : The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual ... using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Last Answer : Answer: C

In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes more efficient at lower capacitance. C. the arrangement allows the coupling of the signal while it isolates the biasing of each stage. D. good frequency response.

Description : In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes ... of the signal while it isolates the biasing of each stage. D. good frequency response.

Last Answer : Answer: C

Discharge switches are often located on hand-driven meggers. The purpose of these switches is to discharge capacitive charges stored in the _____________. A. megger hand generator B. megger movement coils C. tested equipment while conducting test D. tested equipment after testing

Description : Discharge switches are often located on hand-driven meggers. The purpose of these switches is to discharge capacitive charges stored in the _____________. A. megger hand generator B. megger movement coils C. tested equipment while conducting test D. tested equipment after testing

Last Answer : Answer: D

Voltage will always lead current in a/an ______________. A. capacitive circuit B. inductive circuit C. magnetic circuit D. resistive circuit

Description : Voltage will always lead current in a/an ______________. A. capacitive circuit B. inductive circuit C. magnetic circuit D. resistive circuit

Last Answer : Answer: B

Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Description : Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Last Answer : Answer: B

An AC circuit has capacitance arranged in series. If the line voltage remains constant, the capacitive reactance value can be varied by changing the _____________. A. line frequency B. resistance C. number of commutating poles D. number of interpoles

Description : An AC circuit has capacitance arranged in series. If the line voltage remains constant, the capacitive reactance value can be varied by changing the _____________. A. line frequency B. resistance C. number of commutating poles D. number of interpoles

Last Answer : Answer: A

When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Description : When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Last Answer : Answer: B

The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the collector of 'Q1' C. acts as a low capacitive reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

The horizontal line which cuts across 'L1' shown in figure 'A' of the illustration indicates a/an ______________. EL-0091 A. iron core B. saturable core C. air gap D. capacitive coupling

Description : The horizontal line which cuts across 'L1' shown in figure 'A' of the illustration indicates a/an ______________. EL-0091 A. iron core B. saturable core C. air gap D. capacitive coupling

Last Answer : Answer: B

The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Description : The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Last Answer : Answer: C

The ratio of the effective value of the counter EMF in volts, to the effective value of the current in amperes is called _____________. A. impedance factor B. capacitive reactance C. inductive reactance D. root mean square

Description : The ratio of the effective value of the counter EMF in volts, to the effective value of the current in amperes is called _____________. A. impedance factor B. capacitive reactance C. inductive reactance D. root mean square

Last Answer : Answer: C

AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Description : Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Last Answer : A. Crosstalk

What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Description : What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Last Answer : A. A parallel LC circuit

Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Description : Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Last Answer : D. loading coil

What are the methods of capacitive switching?

Description : What are the methods of capacitive switching?

Last Answer : • Opening of single capacitor bank • Closing of one capacitor bank against another

Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Description : Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Last Answer : C. resistive load at the resonant frequency

What is capacitance and capacitive reactance?

Description : What is capacitance and capacitive reactance?

Last Answer : Capacitance The property of a capacitor to store electrical energy in it, when it is connected to an electric supply is called capacitance. Unit for measurement is farad. Capacitor store an electric ... called capacitive reactance and it denoted by the letter XC. The unit for measurement is ohm.

Find the dissipation factor when series resistance is 5 ohm and capacitive resistance is 10 unit. a) 2 b) 0.5 c) 1 d) 0

Description : Find the dissipation factor when series resistance is 5 ohm and capacitive resistance is 10 unit. a) 2 b) 0.5 c) 1 d) 0

Last Answer : b) 0.5

LVDT used for displacement measurement is a/an __________ transducer. (A) Passive (B) Active (C) Capacitive (D) None of these

Description : LVDT used for displacement measurement is a/an __________ transducer. (A) Passive (B) Active (C) Capacitive (D) None of these

Last Answer : (A) Passive

For interrupting capacitive currents which Circuit Breaker (CB) is used a) SF6 CB b) Oil CB c) Vacuum CB d) Air blast CB

Description : For interrupting capacitive currents which Circuit Breaker (CB) is used a) SF6 CB b) Oil CB c) Vacuum CB d) Air blast CB

Last Answer : Ans: Vacuum CB

In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Description : In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Last Answer : Ans: All of the above

Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Description : Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Last Answer : (a) compensate for line inductive reactance

What happens to capacitive reactance as frequency increases?

Description : What happens to capacitive reactance as frequency increases?

Last Answer : It decreases.

What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Description : What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Last Answer : Lower.

Capacitive tuning by inserting a ring into the cavity slot of a magnetron is accomplished by what type of tuning mechanism?

Description : Capacitive tuning by inserting a ring into the cavity slot of a magnetron is accomplished by what type of tuning mechanism?

Last Answer : . A cookie-cutter tuner