In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite
by

1 Answer

Answer :

d.infinite
by

Related questions

For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Description : For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Last Answer : b.3*3

To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Description : To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Last Answer : d.finite elements

-------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Description : -------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Last Answer : c.Translation

The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above

Description : The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above

Last Answer : a.very large

Which of the following is true for the stiffness matrix (K)? a.K is a banded matrix b.K is un-symmetric c.K is an un-banded matrix d.none of the above

Description : Which of the following is true for the stiffness matrix (K)? a.K is a banded matrix b.K is un-symmetric c.K is an un-banded matrix d.none of the above

Last Answer : a.K is a banded matrix

Which of the following is not a method for calculation of the stiffness matrix? a.The minimum potential energy principle b.Galerkin's principle c.Weighted residual method d.Inverse matrix method

Description : Which of the following is not a method for calculation of the stiffness matrix? a.The minimum potential energy principle b.Galerkin's principle c.Weighted residual method d.Inverse matrix method

Last Answer : d.Inverse matrix method

The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.

Description : The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.

Last Answer : d.0

Stiffness matrix depends on a.material b.geometry c.both material and geometry d.none of the above

Description : Stiffness matrix depends on a.material b.geometry c.both material and geometry d.none of the above

Last Answer : c.both material and geometry

On gathering stiffness and loads, the system of equations is given by a.KQ=F b.KQ≠F c.K=QF d.K≠QF

Description : On gathering stiffness and loads, the system of equations is given by a.KQ=F b.KQ≠F c.K=QF d.K≠QF

Last Answer : a.KQ=F

From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Description : From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Last Answer : d.Constructive Solid Geometry

Explicit support structures are not required in Selective Laser Sintering (SLS). a.TRUE b.FALSE c. d.

Description : Explicit support structures are not required in Selective Laser Sintering (SLS). a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part

Description : Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part

Last Answer : b.Checking 3D CAD data

Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : b.Part orientation

Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : c.Tool path generation

Which material can be efficiently used as a support material? a.ABS b.PLA c.Nylon d.INF

Description : Which material can be efficiently used as a support material? a.ABS b.PLA c.Nylon d.INF

Last Answer : d.INF

Support structures are required for ______ a.thin portions b.thick portions c.overhanging portions d.all of the above

Description : Support structures are required for ______ a.thin portions b.thick portions c.overhanging portions d.all of the above

Last Answer : c.overhanging portions

To indicate the position of the workpiece ly & easily machine zero pint should be displacedto another point on the workpiece called… a.Workpiece zero Point b.machine Zero Point c.Start Point d.Program Zero point

Description : To indicate the position of the workpiece ly & easily machine zero pint should be displacedto another point on the workpiece called… a.Workpiece zero Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : a.Workpiece zero Point

……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Description : ……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : b.machine Zero Point

An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Description : An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Description : The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Last Answer : c.both a & b

When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Description : When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Last Answer : a.plane stress

The B-spline curve has a a.first-order continuity b.second-order continuity c.zero-order continuity d.none of the above

Description : The B-spline curve has a a.first-order continuity b.second-order continuity c.zero-order continuity d.none of the above

Last Answer : b.second-order continuity

In synthetic curves, zero-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Description : In synthetic curves, zero-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Last Answer : a.a position continuous curve

Transpose of a column matrix is a.Zero matrix b.Identity matrix c.Row matrix d.Diagonal matrix

Description : Transpose of a column matrix is a.Zero matrix b.Identity matrix c.Row matrix d.Diagonal matrix

Last Answer : c.Row matrix

In homogeneous coordinates value of ‘h’ is consider as 1 & it is called….. a.Magnitude Vector b.Unit Vector c.Non-Zero Vector d.Non-Zero Scalar Factor

Description : In homogeneous coordinates value of ‘h’ is consider as 1 & it is called….. a.Magnitude Vector b.Unit Vector c.Non-Zero Vector d.Non-Zero Scalar Factor

Last Answer : d.Non-Zero Scalar Factor

The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

____ is a manufacturing philosophy in which different parts are manufactured in a small batchor group based on similarities a.Production technology b.Group technology c.Flexible manufacturing system d.None of the above

Description : ____ is a manufacturing philosophy in which different parts are manufactured in a small batchor group based on similarities a.Production technology b.Group technology c.Flexible manufacturing system d.None of the above

Last Answer : b.Group technology

Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Description : Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Last Answer : b.Plastic parts in small batch sizes

If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Description : If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Last Answer : a.more

Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Description : Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Last Answer : a.2u3-3u2+2u+4

Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1

Description : Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1

Last Answer : a.-5u3+8u2+u+1

Two lines L1 and L2 having Parametric equations are P1=[3 4 7]+u[2 2 -6] and P2=[15 -2]+u[1 4 2]. Tangent vector for line L1 a.2i+2j-6k b.2i+2j+6k c.2i-2j-6k d.6-2j-2k

Description : Two lines L1 and L2 having Parametric equations are P1=[3 4 7]+u[2 2 -6] and P2=[15 -2]+u[1 4 2]. Tangent vector for line L1 a.2i+2j-6k b.2i+2j+6k c.2i-2j-6k d.6-2j-2k

Last Answer : a.2i+2j-6k

Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Last Answer : c.[3.75 4.75 6.75]

Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k

Description : Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k

Last Answer : b.3i-j-5k

Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]

Description : Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]

Last Answer : a.[3 5 8]+u[3 -1 -5]

A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Description : A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of ... be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Last Answer : a. More than one

A body weighing one tonne falls through 8 cm on to a spring of stiffness 500 kg/cm the spring will be compressed through a.8 cm b.6 cm c.4 cm d.10 cm e.12 cm

Description : A body weighing one tonne falls through 8 cm on to a spring of stiffness 500 kg/cm the spring will be compressed through a.8 cm b.6 cm c.4 cm d.10 cm e.12 cm

Last Answer : a. 8 cm

If charge stored on plates of capacitor is large, then capacitance will be A. small B. large C. zero D. infinite

Description : If charge stored on plates of capacitor is large, then capacitance will be A. small B. large C. zero D. infinite

Last Answer : large

Rest mass of the photon is a) Infinite b) Zero c) Very small d) 1.67  10-27 Kg

Description : Rest mass of the photon is a) Infinite b) Zero c) Very small d) 1.67  10-27 Kg

Last Answer : b) Zero

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Last Answer : C) Remain unchanged

Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Last Answer : b.Teach pendant is used for manual teaching.

A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Last Answer : c.High Production

--------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Description : --------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed

Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above

Description : Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : b.Programmable

Which automation is suited for high production quantities a.Flexible b.Programmable c.Fixed d.All of above

Description : Which automation is suited for high production quantities a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed

A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Description : A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Last Answer : c.Higher-level strategies

Use computers for storage and retrieval of the data for the process plans are? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Description : Use computers for storage and retrieval of the data for the process plans are? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Last Answer : a.Lower-level strategies

Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Last Answer : c.Additional holes, teeth and forming

Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : d.Plane surface machining