To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements
by

1 Answer

Answer :

d.finite elements
by

Related questions

In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Description : In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Last Answer : d.infinite

The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Description : The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Last Answer : a.discretization

The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above

Description : The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above

Last Answer : c.axisymmetric shells

The finite element methods can be applied in ---------areas. a.thermal b.soil and rock mechanics c.vibration d.all of the above

Description : The finite element methods can be applied in ---------areas. a.thermal b.soil and rock mechanics c.vibration d.all of the above

Last Answer : d.all of the above

is/are the phase/s of finite element method a.Pre-processing b.Solution c.Post Processing d.None

Description : is/are the phase/s of finite element method a.Pre-processing b.Solution c.Post Processing d.None

Last Answer : c.Post Processing

Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Last Answer : a.approximate numerical solution

The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics

Description : The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics

Last Answer : d.engineering mechanics

What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above

Description : What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above

Last Answer : b.Finite Element Analysis

Which of the following module of FEA is used to determine natural frequency? a.Static analysis b.Thermal analysis c.Modal analysis d.All of the above

Description : Which of the following module of FEA is used to determine natural frequency? a.Static analysis b.Thermal analysis c.Modal analysis d.All of the above

Last Answer : c.Modal analysis

What type of inner structure can be used to reduce the printing time of the model in RP? a.Higher resolution b.Smaller polygons c.Lower resolution d.None of the above

Description : What type of inner structure can be used to reduce the printing time of the model in RP? a.Higher resolution b.Smaller polygons c.Lower resolution d.None of the above

Last Answer : c.Lower resolution

The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Description : The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Last Answer : c.equal to

If the structure is more complex in order to simplify the model, we need to subdividethe structure into substructures. These substructures are termed as . a.elements b.modules c.links d.models

Description : If the structure is more complex in order to simplify the model, we need to subdividethe structure into substructures. These substructures are termed as . a.elements b.modules c.links d.models

Last Answer : b.modules

From the following which is the step of machine cell design? a.Divide parts into part families b.Select type of machine cell c.Prepare a composite part d.All of the above

Description : From the following which is the step of machine cell design? a.Divide parts into part families b.Select type of machine cell c.Prepare a composite part d.All of the above

Last Answer : d.All of the above

Those substances which have so far not been resolved by any means into other substances of simpler form are called  A. elements  B. compounds  C. atoms  D. molecules

Description : Those substances which have so far not been resolved by any means into other substances of simpler form are called  A. elements  B. compounds  C. atoms  D. molecules

Last Answer : Answer: A

In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Description : In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Last Answer : b.External shape and external shape elements

If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Description : If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Last Answer : a.more

For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Description : For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Last Answer : b.3*3

In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none

Description : In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none

Last Answer : c.elements

For truss analysis, which type of elements is used? a.Triangle b.Parallelogram c.Rectangle d.Bar

Description : For truss analysis, which type of elements is used? a.Triangle b.Parallelogram c.Rectangle d.Bar

Last Answer : d.Bar

Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Description : Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Last Answer : d.6

If a ‘3 x 3’ matrix shears in Y direction, how many elements of it are ‘0’? a.2 b.3 c.6 d.5

Description : If a ‘3 x 3’ matrix shears in Y direction, how many elements of it are ‘0’? a.2 b.3 c.6 d.5

Last Answer : d.5

If a ‘3 x 3’ matrix shears in X direction, how many elements of it are ‘1’? a.2 b.3 c.6 d.5

Description : If a ‘3 x 3’ matrix shears in X direction, how many elements of it are ‘1’? a.2 b.3 c.6 d.5

Last Answer : b.3

The endurance or fatigue limit is defined as the maximum value of the stress which a polished standard specimen can withstand without failure, for infinite number of cycles, when subjected to (a) static load (b) dynamic load (c) static as well as dynamic load (d) completely reversed load

Description : The endurance or fatigue limit is defined as the maximum value of the stress which a polished standard specimen can withstand without failure, for infinite number of cycles, when subjected to (a) static load (b) dynamic load (c) static as well as dynamic load (d) completely reversed load

Last Answer : (d) completely reversed load

Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Description : Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Last Answer : b.Automatic product sorting

From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Description : From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Last Answer : b.Independent movement of part between stations

____ is a collection of parts which have similar characteristics a.Part family b.Mono family c.GT family d.Poly family

Description : ____ is a collection of parts which have similar characteristics a.Part family b.Mono family c.GT family d.Poly family

Last Answer : a.Part family

____ is a manufacturing philosophy in which different parts are manufactured in a small batchor group based on similarities a.Production technology b.Group technology c.Flexible manufacturing system d.None of the above

Description : ____ is a manufacturing philosophy in which different parts are manufactured in a small batchor group based on similarities a.Production technology b.Group technology c.Flexible manufacturing system d.None of the above

Last Answer : b.Group technology

Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Description : Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Last Answer : b.Plastic parts in small batch sizes

Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Last Answer : c.is a method for controlling by means of set of instructions

To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Last Answer : a.shape function

Can you solve this math problem, which is much simpler than it may at first appear?

Description : Can you solve this math problem, which is much simpler than it may at first appear?

Last Answer : I’m a little confused? The point of the problem is to show existence (>= 1 example that works) but you gave an example already in the problem statement? Doesn’t that answer it already?

The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above

Description : The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above

Last Answer : a.very large

In FEA of a fluid mechanics problem, we need to find . a.stress distribution b.heat flux distribution c.pressure distribution d.all of the above

Description : In FEA of a fluid mechanics problem, we need to find . a.stress distribution b.heat flux distribution c.pressure distribution d.all of the above

Last Answer : c.pressure distribution

The statement that is NOT correct is (a) The breaking of complex and big molecules into simpler and smaller molecules by micro-organisms is called fermentation. (b) ****** contains high percentage of methanol. (c) Root **** does not contain alcohol. (d) Alcoholic fermentation involves the conversion of sugars into alcohol by the use of micro-organisms.

Description : The statement that is NOT correct is (a) The breaking of complex and big molecules into simpler and smaller molecules by micro-organisms is called fermentation. (b) Whisky contains high ... d) Alcoholic fermentation involves the conversion of sugars into alcohol by the use of micro-organisms.

Last Answer : Ans:(b)

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Description : Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Last Answer : a. greater than the dynamic driction

Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part

Description : Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part

Last Answer : a.Limited material variety

In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Last Answer : d.Stereolithography

Which file format cannot be converted into STL file format? a..prt b..sld c..dwg d..stp

Description : Which file format cannot be converted into STL file format? a..prt b..sld c..dwg d..stp

Last Answer : c..dwg

__________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : c.Formative process

he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Description : he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Last Answer : b.depth of cut

The process of putting data into a storage location is called a.reading b.writing c.controlling d.hand shaking

Description : The process of putting data into a storage location is called a.reading b.writing c.controlling d.hand shaking

Last Answer : b.writing

We can combine the multiplicative and translational terms for 2D into a singlematrix representation by expanding a.2 x 2 matrix into 4x4 matrix b.2 x 2 matrix into 3 x 3 c.3 x 3 matrix into 2 x 2 d.Only c

Description : We can combine the multiplicative and translational terms for 2D into a singlematrix representation by expanding a.2 x 2 matrix into 4x4 matrix b.2 x 2 matrix into 3 x 3 c.3 x 3 matrix into 2 x 2 d.Only c

Last Answer : b.2 x 2 matrix into 3 x 3

Can infinite and finite coexist?

Description : Can infinite and finite coexist?

Last Answer : No, this why the concept of God is flawed from the start.

Is the set of all information infinite or finite?

Description : Is the set of all information infinite or finite?

Last Answer : Must be a guy thing.

Which of the following sets in an finite/infinite set ? `(i)` Set of divisors of `24` `(ii)` Set of all real number which lie between `1` and `2` `(ii

Description : Which of the following sets in an finite/infinite set ? `(i)` Set of divisors of `24` `(ii)` Set of all real number which lie between `1` and `2` `(ii

Last Answer : Which of the following sets in an finite/infinite set ? `(i)` Set of divisors of `24` `(ii)` ... India. `(iv)` Set of all three digit natural numbers

What are discrete parameter systems? *1 point (A) Systems which have infinite number of degree of freedom (B) Systems which have finite number of degree of freedom (C) Systems which have no degree of freedom (D) None of the above

Description : What are discrete parameter systems? *1 point (A) Systems which have infinite number of degree of freedom (B) Systems which have finite number of degree of freedom (C) Systems which have no degree of freedom (D) None of the above

Last Answer : (B) Systems which have finite number of degree of freedom

What are discrete parameter systems? A. Systems which have infinite number of degree of freedom B. Systems which have finite number of degree of freedom C. Systems which have no degree of freedom D. None of the above

Description : What are discrete parameter systems? A. Systems which have infinite number of degree of freedom B. Systems which have finite number of degree of freedom C. Systems which have no degree of freedom D. None of the above

Last Answer : B. Systems which have finite number of degree of freedom