Which of the following code will give point to point movement? a.G00 b.G01 c.G56 d.G94

Which of the following code will give point to point movement? a.G00 b.G01 c.G56 d.G94
by

1 Answer

Answer :

a.G00
by

Related questions

G00 Preparatory code is used for a.Rapid Travel Execution b.Rapid Travel Positioning c.Rapid Travel sequencing d.Rapid clockwise interpolation

Description : G00 Preparatory code is used for a.Rapid Travel Execution b.Rapid Travel Positioning c.Rapid Travel sequencing d.Rapid clockwise interpolation

Last Answer : b.Rapid Travel Positioning

Match the following: NC code DefinitionP. M05 1. Absolute coordinate system Q. G01 2. Dwell R. G04 3. Spindle stop S. G09 4. Linear interpolation a.P-2, Q-3, R-4, S-1 b.P-3, Q-4, R-1, S-2 c.P-3, Q-4, R-2, S-1 d.P-4, Q-3, R-2, S-1

Description : Match the following: NC code DefinitionP. M05 1. Absolute coordinate system Q. G01 2. Dwell R. G04 3. Spindle stop S. G09 4. Linear interpolation a.P-2, Q-3, R-4, S-1 b.P-3, Q-4, R-1, S-2 c.P-3, Q-4, R-2, S-1 d.P-4, Q-3, R-2, S-1

Last Answer : c.P-3, Q-4, R-2, S-1

State the function of G00, G94, M08 and M30 used in CNC part programming.

Description : State the function of G00, G94, M08 and M30 used in CNC part programming. 

Last Answer : 1) G00 :- Rapid Traverse Function G00 is the basic G-code for CNC programming to initiate rapid motion mode i.e used for quickly positioning the tool. G00 can be used where the tool is not ... production. As soon as the program ends he can place the next component and start the next cycle. 

……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Description : ……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Last Answer : d.Block

Which of the following code is used to return to a reference point? a.G23 b.G28 c.G14 d.G19

Description : Which of the following code is used to return to a reference point? a.G23 b.G28 c.G14 d.G19

Last Answer : b.G28

The operating range or reach capability of robot is known as ____ in robotics a.Roll b.Pitch c.Yaw d.Speed of movement

Description : The operating range or reach capability of robot is known as ____ in robotics a.Roll b.Pitch c.Yaw d.Speed of movement

Last Answer : c.Yaw

The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Last Answer : c.Speed of movement

____ is also known as work volume of robot a.Work envelope b.Speed of movement c.Load carrying capacity d.Precision of movement

Description : ____ is also known as work volume of robot a.Work envelope b.Speed of movement c.Load carrying capacity d.Precision of movement

Last Answer : a.Work envelope

From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Description : From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Last Answer : b.Independent movement of part between stations

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

Secondary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Secondary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : c.Production operation type & sequence

Supplementary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Supplementary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : b.Manufacturing attributes

Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : a.Design attributes

The last four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Description : The last four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Last Answer : b.Secondary code

The middle four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Description : The middle four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Last Answer : c.Supplementary code

The first five digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Description : The first five digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Last Answer : a.Form code

Chain type coding structure is also known as________ a.Poly code b.Mono code c.Hybrid code d.Miscellaneous code

Description : Chain type coding structure is also known as________ a.Poly code b.Mono code c.Hybrid code d.Miscellaneous code

Last Answer : a.Poly code

From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Description : From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : c.Mono code

From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Description : From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : a.Poly code

From the following in which coding method supplementary code and form code are used? a.KK3 system b.The MICLASS system c.OPITZ coding system d.The DICLASS system

Description : From the following in which coding method supplementary code and form code are used? a.KK3 system b.The MICLASS system c.OPITZ coding system d.The DICLASS system

Last Answer : c.OPITZ coding system

Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Description : Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Last Answer : b.M06

The following code will produce dwell for a specified time… a.G18 b.G65 c.G45 d.G04

Description : The following code will produce dwell for a specified time… a.G18 b.G65 c.G45 d.G04

Last Answer : d.G04

Maximum spindle speed limitation code in CNC Machine a.G90 b.G91 c.G92 d.G93

Description : Maximum spindle speed limitation code in CNC Machine a.G90 b.G91 c.G92 d.G93

Last Answer : c.G92

State the function of the programming code. (i) G01 (ii) G90

Description : State the function of the programming code. (i) G01 (ii) G90

Last Answer : (i) G01: Linear Interpolation. (ii) G90: Absolute Programming.

NC contouring is an example of a.Continuous path positioning b.Point-to-point positioning c.Absolute positioning d.Incremental positioning

Description : NC contouring is an example of a.Continuous path positioning b.Point-to-point positioning c.Absolute positioning d.Incremental positioning

Last Answer : a.Continuous path positioning

In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Last Answer : b.(10, 5)

To indicate the position of the workpiece ly & easily machine zero pint should be displacedto another point on the workpiece called… a.Workpiece zero Point b.machine Zero Point c.Start Point d.Program Zero point

Description : To indicate the position of the workpiece ly & easily machine zero pint should be displacedto another point on the workpiece called… a.Workpiece zero Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : a.Workpiece zero Point

……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Description : ……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : b.machine Zero Point

In , the coordinates are mentioned in the program with respect to onePrevious point. a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Description : In , the coordinates are mentioned in the program with respect to onePrevious point. a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Last Answer : a.Incremental System

In , the coordinates are mentioned in the program with respect to onereference point a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Description : In , the coordinates are mentioned in the program with respect to onereference point a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Last Answer : b.Absolute System

An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Description : An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

Point-to-point systems are used for a.reaming b.parting c.grooving d.facing

Description : Point-to-point systems are used for a.reaming b.parting c.grooving d.facing

Last Answer : a.reaming

n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are a.N010 GO3 X7.0 Y2.0 I5.0 J2.0 b.N010 GO2 X7.0 Y2.0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0

The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Description : The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Last Answer : c.both a & b

The minimum number of dimensions are required to define the position of a point in spaceis . a.3 b.4 c.1 d.2

Description : The minimum number of dimensions are required to define the position of a point in spaceis . a.3 b.4 c.1 d.2

Last Answer : a.3

The truss element can resist only a.surface force b.axial force c.point load d.none of the above

Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above

Last Answer : b.axial force

The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Description : The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Last Answer : c.equal to

Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

C” continuity refers to a.Common tangent b.Common curvature c.Common point d.Common normal

Description : C” continuity refers to a.Common tangent b.Common curvature c.Common point d.Common normal

Last Answer : a.Common tangent

C‘ continuity refers to a.Common tangent b.Common curvature c.Common point d.Common normal

Description : C‘ continuity refers to a.Common tangent b.Common curvature c.Common point d.Common normal

Last Answer : b.Common curvature

C0 continuity refers to a.Common tangent b.Common curvature c.Common point d.Common normal

Description : C0 continuity refers to a.Common tangent b.Common curvature c.Common point d.Common normal

Last Answer : c.Common point

For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5

Description : For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5

Last Answer : a.11.6, 7

A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7

Description : A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7

Last Answer : c.8,7

A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Last Answer : a.9.24,9.24

Center point of circle a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2 b.[x1-x2]/2; [y1-y2]/2; [z1-z2]/2 c.[x1-x2]; [y1-y2]; [z1-z2] d.[x2-x1]; [y2-y1]; [z2-z1]

Description : Center point of circle a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2 b.[x1-x2]/2; [y1-y2]/2; [z1-z2]/2 c.[x1-x2]; [y1-y2]; [z1-z2] d.[x2-x1]; [y2-y1]; [z2-z1]

Last Answer : a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2

The curve is defined as the locus of a point moving with _ degree of freedom a.0 b.1 c.2 d.3

Description : The curve is defined as the locus of a point moving with _ degree of freedom a.0 b.1 c.2 d.3

Last Answer : b.1

Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

Coordinate of â–¡ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new vertices of point A in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)

Description : Coordinate of â- ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new ... in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)

Last Answer : a.(4.268, 6.732)

General pivot point rotation can be expressed as a.T(zr,yr).R(θ).T(-zr,-yr) = R(xr,yr,θ) b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ) c.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ) d.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ)

Description : General pivot point rotation can be expressed as a.T(zr,yr).R(θ).T(-zr,-yr) = R(xr,yr,θ) b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ) c.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ) d.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ)

Last Answer : b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ)

We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Description : We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Last Answer : b.Fixed point