In STL files when chord length decrease then accuracy _______ a.increase b.decrease c.may increase or may decrease d.remains constant

In STL files when chord length decrease then accuracy _______ a.increase b.decrease c.may increase or may decrease d.remains constant
by

1 Answer

Answer :

a.increase
by

Related questions

STL files plague several problems as they contain no _______ data a.geographical b.analytical c.topological d.all of the above

Description : STL files plague several problems as they contain no _______ data a.geographical b.analytical c.topological d.all of the above

Last Answer : c.topological

In STL files Euler’s rule for solids can be written as a.No. of faces – No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces – No. of edges + No. of vertices = No. of bodies c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies d.No. of faces – No. of edges + No. of vertices = 4 x No. of bodies

Description : In STL files Euler’s rule for solids can be written as a.No. of faces †No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces †No. of edges + No. of vertices = No. of bodies c.No. of ... = 2 x No. of bodies d.No. of faces †No. of edges + No. of vertices = 4 x No. of bodies

Last Answer : c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies

STL files contains ______ a.mass properties of the model b.geometrical data c.drawing data d.all of the above

Description : STL files contains ______ a.mass properties of the model b.geometrical data c.drawing data d.all of the above

Last Answer : b.geometrical data

The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Description : The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Last Answer : c.RP machine

STL consists of an unordered list of _______ facets representing the outside skin of an object. a.linear b.triangular c.square d.hexagonal

Description : STL consists of an unordered list of _______ facets representing the outside skin of an object. a.linear b.triangular c.square d.hexagonal

Last Answer : b.triangular

What is the format for the prototyping machine file? a..prt b..slt c..stl d..iges

Description : What is the format for the prototyping machine file? a..prt b..slt c..stl d..iges

Last Answer : c..stl

STL file consists of which of the following format? a.ASCII b.Binary c.Both A & B d.Neither A nor B

Description : STL file consists of which of the following format? a.ASCII b.Binary c.Both A & B d.Neither A nor B

Last Answer : c.Both A & B

Which of the following is not a data interfacing format? a.STL b.SLC c.LEAF d.RP

Description : Which of the following is not a data interfacing format? a.STL b.SLC c.LEAF d.RP

Last Answer : d.RP

Which file format cannot be converted into STL file format? a..prt b..sld c..dwg d..stp

Description : Which file format cannot be converted into STL file format? a..prt b..sld c..dwg d..stp

Last Answer : c..dwg

STL file format is represented by interaction of ______ a.lines and hexagons b.lines and rectangles c.lines and triangles d.lines and circles

Description : STL file format is represented by interaction of ______ a.lines and hexagons b.lines and rectangles c.lines and triangles d.lines and circles

Last Answer : c.lines and triangles

STL file converts curved surfaces into_______ a.Polygons b.Lines c.Surfaces d.None of the above

Description : STL file converts curved surfaces into_______ a.Polygons b.Lines c.Surfaces d.None of the above

Last Answer : a.Polygons

Slicing a part is easier in ______ a.B-rep method b.STL method c.CSG method d.PRT method

Description : Slicing a part is easier in ______ a.B-rep method b.STL method c.CSG method d.PRT method

Last Answer : b.STL method

Process of converting STL file model in to layers is called________in RP a.chopping b.slicing c.cutting d.trimming

Description : Process of converting STL file model in to layers is called________in RP a.chopping b.slicing c.cutting d.trimming

Last Answer : b.slicing

For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Description : For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Last Answer : c.STL

Full form of STL is _____ a.Straight-lithography b.Streto-lithography c.Stereo-lithography d.Straight-lipsography

Description : Full form of STL is _____ a.Straight-lithography b.Streto-lithography c.Stereo-lithography d.Straight-lipsography

Last Answer : c.Stereo-lithography

Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Description : Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Last Answer : a.3D CAD data - CAD solid model - STL file - RP prototype

In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Description : In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Last Answer : b.increase in the number of vertices

The degree of the B-spline with varying knot vectors a.Increases with knot vectors b.Decreases with knot vectors c.Remains constant d.none of the above

Description : The degree of the B-spline with varying knot vectors a.Increases with knot vectors b.Decreases with knot vectors c.Remains constant d.none of the above

Last Answer : a.Increases with knot vectors

A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Description : A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Last Answer : a.Automated storage and retrieval system (AS/RS)

In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Description : In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Last Answer : b.increase in the number of vertices

In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

When every entity of a geometric model remains parallel to its initial position, thetransformation is called as a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Description : When every entity of a geometric model remains parallel to its initial position, thetransformation is called as a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Last Answer : b.World Coordinate System

In “Product Life Cycle” in _______ stage market becomes saturated a.Mature stage b.Growth stage c.Decline stage d.Introduction stage

Description : In “Product Life Cycle” in _______ stage market becomes saturated a.Mature stage b.Growth stage c.Decline stage d.Introduction stage

Last Answer : a.Mature stage

In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder

Description : In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder

Last Answer : d.perpendicular to the axis of the cylinder

Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Description : The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Last Answer : b.Tool length offset H

Feed is measured in units of a.length/revolution b.degree/revolution c.length d.velocity

Description : Feed is measured in units of a.length/revolution b.degree/revolution c.length d.velocity

Last Answer : a.length/revolution

The unit vector in the direction of the line is defined as . a.tangent vector+length of the line b.tangent vector-length of the line c.tangent vector/length of the line d.length of the line/tangent vector

Description : The unit vector in the direction of the line is defined as . a.tangent vector+length of the line b.tangent vector-length of the line c.tangent vector/length of the line d.length of the line/tangent vector

Last Answer : c.tangent vector/length of the line

The accuracy of an estimate should: a. decrease as a project progresses through its life cycle. b. increase as a project progresses through its life cycle. c. stay constant throughout the project life cycle. d. vary independently of where the project is in its life cycle.

Description : The accuracy of an estimate should: a. decrease as a project progresses through its life cycle. b. increase as a project progresses through its life cycle. c. stay constant throughout the project life cycle. d. vary independently of where the project is in its life cycle.

Last Answer : b. increase as a project progresses through its life cycle.

The accuracy of an estimate should: a. decrease as a project progresses through its life cycle. b. increase as a project progresses through its life cycle. c. stay constant throughout the project life cycle. d. vary independently of where the project is in its life cycle.

Description : The accuracy of an estimate should:  a. decrease as a project progresses through its life cycle.  b. increase as a project progresses through its life cycle.  c. stay constant throughout the project life cycle.  d. vary independently of where the project is in its life cycle.

Last Answer : b. increase as a project progresses through its life cycle.

In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational – Material – Size – Shape b.Material – Rotational or non rotational – Size – Shape c.Size – Rotational or non rotational – Material – Shape d.Shape – Rotational or non rotational – Material – Size

Description : In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational †Material †Size †Shape b.Material †Rotational or non ... non rotational †Material †Shape d.Shape †Rotational or non rotational †Material †Size

Last Answer : a.Rotational or non rotational – Material – Size – Shape

With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Description : With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Last Answer : c.Digitizers may be used as interactive input devices

Reversing the order in which a sequence of transformations is performed may affect thetransformed position of an object. a.TRUE b.FALSE c. d.

Description : Reversing the order in which a sequence of transformations is performed may affect thetransformed position of an object. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material

Description : The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material

Last Answer : (B) Progressively decreases

As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Description : As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Last Answer : decreases

If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Last Answer : b.FALSE

If the body is in a state of equilibrium then the energy is minimum. This statement isconsidered in . a.inverse matrix method b.weighted residual method c.Galerkin’s principle d.the minimum potential energy principle

Description : If the body is in a state of equilibrium then the energy is minimum. This statement isconsidered in . a.inverse matrix method b.weighted residual method c.Galerkin’s principle d.the minimum potential energy principle

Last Answer : d.the minimum potential energy principle

For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Description : For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Last Answer : b.3*3

When a smooth curve is approximated through the data points, then the curve is knownas a.approximation curve b.pitch curve c.data curve d.interpolant curve

Description : When a smooth curve is approximated through the data points, then the curve is knownas a.approximation curve b.pitch curve c.data curve d.interpolant curve

Last Answer : a.approximation curve

When the curve passes through all the data points, then the curve is known as a.approximation curve b.pitch curve c.data curve d.interpolant curve

Description : When the curve passes through all the data points, then the curve is known as a.approximation curve b.pitch curve c.data curve d.interpolant curve

Last Answer : d.interpolant curve

When a smooth curve is approximated through the data points, then the curve isknown as a.interpolant curve b.approximation curve c.pitch curve d.data curve

Description : When a smooth curve is approximated through the data points, then the curve isknown as a.interpolant curve b.approximation curve c.pitch curve d.data curve

Last Answer : b.approximation curve

If the value of Sx=1 and Sy=1 then a.Reduce the size of object b.Distort the picture c.Produce an enlargement d.No change in the size of an object

Description : If the value of Sx=1 and Sy=1 then a.Reduce the size of object b.Distort the picture c.Produce an enlargement d.No change in the size of an object

Last Answer : d.No change in the size of an object

If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Description : If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Last Answer : a.It reduces the size of object

If the scaling factors values Sx and Sy are assigned to unequal values then a.Uniform rotation is produced b.Uniform scaling is produced c.Differential scaling is produced d.Scaling cannot be done

Description : If the scaling factors values Sx and Sy are assigned to unequal values then a.Uniform rotation is produced b.Uniform scaling is produced c.Differential scaling is produced d.Scaling cannot be done

Last Answer : c.Differential scaling is produced

If point are expressed in homogeneous coordinates then the pair of (x, y) isrepresented as a.(x’, y’, z’) b.(x, y, z) c.(x’, y’, w’) d.(x’, y’, w)

Description : If point are expressed in homogeneous coordinates then the pair of (x, y) isrepresented as a.(x’, y’, z’) b.(x, y, z) c.(x’, y’, w’) d.(x’, y’, w)

Last Answer : d.(x’, y’, w)

The price of Ford automobiles increases and the price of Chevrolets remains constant, the demand for Chevrolets will (a) increase ; (b) decrease ; (c) decrease then increase ; (d) increase then decrease

Description : The price of Ford automobiles increases and the price of Chevrolets remains constant, the demand for Chevrolets will (a) increase ; (b) decrease ; (c) decrease then increase ; (d) increase then decrease

Last Answer : (a) increase ;

If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (C) Remains unchanged

Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Last Answer : b.Teach pendant is used for manual teaching.

A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Last Answer : c.High Production