If the scaling factors values Sx and Sy are assigned to unequal values then a.Uniform rotation is produced b.Uniform scaling is produced c.Differential scaling is produced d.Scaling cannot be done

If the scaling factors values Sx and Sy are assigned to unequal values then a.Uniform rotation is produced b.Uniform scaling is produced c.Differential scaling is produced d.Scaling cannot be done
by

1 Answer

Answer :

c.Differential scaling is produced
by

Related questions

If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Description : If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Last Answer : b.Uniform scaling is produced

If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Description : If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Last Answer : a.It reduces the size of object

If the value of Sx=1 and Sy=1 then a.Reduce the size of object b.Distort the picture c.Produce an enlargement d.No change in the size of an object

Description : If the value of Sx=1 and Sy=1 then a.Reduce the size of object b.Distort the picture c.Produce an enlargement d.No change in the size of an object

Last Answer : d.No change in the size of an object

The polygons are scaled by applying the following transformation. a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy) b.X’=x * Sx + Xf(1+Sx) & Y’=y * Sy + Yf(1+Sy c.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy – Yf(1-Sy) d.X’=x * Sx * Xf(1-Sx) & Y’=y * Sy * Yf(1-Sy)

Description : The polygons are scaled by applying the following transformation. a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy) b.X’=x * Sx + Xf(1+Sx) & Y’=y * Sy + Yf(1+Sy c.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy – Yf(1-Sy) d.X’=x * Sx * Xf(1-Sx) & Y’=y * Sy * Yf(1-Sy)

Last Answer : a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy)

We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Description : We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Last Answer : b.Fixed point

Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Description : Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Last Answer : d.Shearing

The transformation that is used to alter the size of an object is a.Scaling b.Rotation c.Translation d.Reflection

Description : The transformation that is used to alter the size of an object is a.Scaling b.Rotation c.Translation d.Reflection

Last Answer : a.Scaling

From the following, which one will require 4 matrices to multiply to get the final position? a.Rotation about the origin b.Rotation about an arbitrary Point c.Rotation about an arbitrary line d.Scaling about the origin

Description : From the following, which one will require 4 matrices to multiply to get the final position? a.Rotation about the origin b.Rotation about an arbitrary Point c.Rotation about an arbitrary line d.Scaling about the origin

Last Answer : b.Rotation about an arbitrary Point

The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Description : The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Last Answer : a.Rotation

The basic geometric transformations are a.Translation b.Rotation c.Scaling d.All of the mentioned

Description : The basic geometric transformations are a.Translation b.Rotation c.Scaling d.All of the mentioned

Last Answer : d.All of the mentioned

-------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Description : -------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Last Answer : c.Translation

Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Description : Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Last Answer : d.homogenous co-ordinates

Scaling of a polygon is done by computing a.The product of (x, y) of each vertex b.(x, y) of end points c.Center coordinates d.Only a

Description : Scaling of a polygon is done by computing a.The product of (x, y) of each vertex b.(x, y) of end points c.Center coordinates d.Only a

Last Answer : d.Only a

Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Last Answer : c.Counter clockwise rotations about the pivot point

Shearing is also termed as a.Selecting b.Sorting c.Scaling d.Skewing

Description : Shearing is also termed as a.Selecting b.Sorting c.Scaling d.Skewing

Last Answer : d.Skewing

In Coordinates, a points in n-dimensional space is represent by(n+1) coordinates. a.Scaling b.Homogeneous c.Inverse transformation d.3D Transformation

Description : In Coordinates, a points in n-dimensional space is represent by(n+1) coordinates. a.Scaling b.Homogeneous c.Inverse transformation d.3D Transformation

Last Answer : b.Homogeneous

The matrix representation for scaling in homogeneous coordinates is a.P’=S*P b.P’=R*P c.P’=dx+dy d.P’=S*S

Description : The matrix representation for scaling in homogeneous coordinates is a.P’=S*P b.P’=R*P c.P’=dx+dy d.P’=S*S

Last Answer : a.P’=S*P

Synthetic curve pass through defined data points and thus can be represented by a.polynomial equations b.exponential equations c.partial differential equations d.differential equations

Description : Synthetic curve pass through defined data points and thus can be represented by a.polynomial equations b.exponential equations c.partial differential equations d.differential equations

Last Answer : a.polynomial equations

B rotational axis is rotation about Axis. a.X b.Y c.Z d.C

Description : B rotational axis is rotation about Axis. a.X b.Y c.Z d.C

Last Answer : a.X

In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Description : In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Last Answer : a.Spindle ON in Clockwise rotation

Rotation of spindle is designated by one of the following axis: a.a-axis b.b-axis c.c-axis d.none of the mentioned

Description : Rotation of spindle is designated by one of the following axis: a.a-axis b.b-axis c.c-axis d.none of the mentioned

Last Answer : d.none of the mentioned

Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Description : Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Last Answer : c.c-axis

General pivot point rotation can be expressed as a.T(zr,yr).R(θ).T(-zr,-yr) = R(xr,yr,θ) b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ) c.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ) d.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ)

Description : General pivot point rotation can be expressed as a.T(zr,yr).R(θ).T(-zr,-yr) = R(xr,yr,θ) b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ) c.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ) d.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ)

Last Answer : b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ)

If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection

Description : If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection

Last Answer : a.Pure rotation

Reflection is a special case of rotation. a.TRUE b.FALSE c. d.

Description : Reflection is a special case of rotation. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element

Description : Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element

Last Answer : a.Turn

To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

Description : To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

Last Answer : a.Rotation angle θ

A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Description : A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Last Answer : c.Only b

The two-dimensional rotation equation in the matrix form is a.P’=T+P b.P’=S*P c.P’=R*P d.P’=dx+dy

Description : The two-dimensional rotation equation in the matrix form is a.P’=T+P b.P’=S*P c.P’=R*P d.P’=dx+dy

Last Answer : c.P’=R*P

If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Last Answer : b.FALSE

If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Description : If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Last Answer : a.more

Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Description : Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Last Answer : d.Adobe Illustrator

Which file format cannot be converted into STL file format? a..prt b..sld c..dwg d..stp

Description : Which file format cannot be converted into STL file format? a..prt b..sld c..dwg d..stp

Last Answer : c..dwg

In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above

Description : In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above

Last Answer : d.none of the above

In which type of projection, actual dimensions and angles of objects andtherefore shapes cannot be preserved? a.Orthographic b.Isometric c.Perspective d.None of the above

Description : In which type of projection, actual dimensions and angles of objects andtherefore shapes cannot be preserved? a.Orthographic b.Isometric c.Perspective d.None of the above

Last Answer : c.Perspective

Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Description : Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Last Answer : b.Plastic parts in small batch sizes

In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Description : In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B

Last Answer : d.Both A & B

In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout

Description : In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout

Last Answer : c.Process layout

The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Description : The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Last Answer : d.Adaptive Control System

XY Plane Selection in CNC machining is done by….. a.G16 b.G17 c.G18 d.G19

Description : XY Plane Selection in CNC machining is done by….. a.G16 b.G17 c.G18 d.G19

Last Answer : b.G17

In STL files when chord length decrease then accuracy _______ a.increase b.decrease c.may increase or may decrease d.remains constant

Description : In STL files when chord length decrease then accuracy _______ a.increase b.decrease c.may increase or may decrease d.remains constant

Last Answer : a.increase

If the body is in a state of equilibrium then the energy is minimum. This statement isconsidered in . a.inverse matrix method b.weighted residual method c.Galerkin’s principle d.the minimum potential energy principle

Description : If the body is in a state of equilibrium then the energy is minimum. This statement isconsidered in . a.inverse matrix method b.weighted residual method c.Galerkin’s principle d.the minimum potential energy principle

Last Answer : d.the minimum potential energy principle

For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Description : For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Last Answer : b.3*3

When a smooth curve is approximated through the data points, then the curve is knownas a.approximation curve b.pitch curve c.data curve d.interpolant curve

Description : When a smooth curve is approximated through the data points, then the curve is knownas a.approximation curve b.pitch curve c.data curve d.interpolant curve

Last Answer : a.approximation curve

When the curve passes through all the data points, then the curve is known as a.approximation curve b.pitch curve c.data curve d.interpolant curve

Description : When the curve passes through all the data points, then the curve is known as a.approximation curve b.pitch curve c.data curve d.interpolant curve

Last Answer : d.interpolant curve

When a smooth curve is approximated through the data points, then the curve isknown as a.interpolant curve b.approximation curve c.pitch curve d.data curve

Description : When a smooth curve is approximated through the data points, then the curve isknown as a.interpolant curve b.approximation curve c.pitch curve d.data curve

Last Answer : b.approximation curve

If point are expressed in homogeneous coordinates then the pair of (x, y) isrepresented as a.(x’, y’, z’) b.(x, y, z) c.(x’, y’, w’) d.(x’, y’, w)

Description : If point are expressed in homogeneous coordinates then the pair of (x, y) isrepresented as a.(x’, y’, z’) b.(x, y, z) c.(x’, y’, w’) d.(x’, y’, w)

Last Answer : d.(x’, y’, w)

To provide its unique characteristics to analog circuits, the operational amplifier is made up of a/an ______________. A. voltage amp, current amp and output amp B. input amp, power amp and output amp C. scaling amp, power amp and voltage amp D. differential amp, voltage amp and output amp

Description : To provide its unique characteristics to analog circuits, the operational amplifier is made up of a/an ______________. A. voltage amp, current amp and output amp B. input amp, power amp and output amp C. scaling amp, power amp and voltage amp D. differential amp, voltage amp and output amp

Last Answer : Answer: D

A segment is any object described by GKS commands and data that start with CREATE SEGMENT and Terminates with CLOSE SEGMENT command. What functions can be performed on these segments? (1) Translation and Rotation (2) Panning and Zooming (3) Scaling and Shearing (4) Translation, Rotation, Panning and Zooming

Description : A segment is any object described by GKS commands and data that start with CREATE SEGMENT and Terminates with CLOSE SEGMENT command. What functions can be performed on these segments? (1) Translation ... 2) Panning and Zooming (3) Scaling and Shearing (4) Translation, Rotation, Panning and Zooming

Last Answer : Translation, Rotation, Panning and Zooming

Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Last Answer : b.Teach pendant is used for manual teaching.