The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material

The disintegration rate of a radioactive element
(A) Progressively increases
(B) Progressively decreases
(C) Remains constant throughout
(D) May increase or decrease depending on the material
by

1 Answer

Answer :

(B) Progressively decreases
by

Related questions

In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Description : With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Last Answer : (A) Increases

For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Description : For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Last Answer : (A) Decreases

The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Description : The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Last Answer : (B) Continuously decreases

As the chemical reaction proceeds, the rate of reaction(A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Description : As the chemical reaction proceeds, the rate of reaction (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Last Answer : (B) Decreases

In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Description : In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Last Answer : (C) Decreases

Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Last Answer : (A) Decreases

With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Description : With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Last Answer : (A) Increases

As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Description : As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Last Answer : (B) Increases

As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Description : As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Last Answer : decreases

Pick out the wrong statement. (A) α-particle emission from a radioactive element makes it electrically negative (B) β-particle emission from a radioactive element makes it electrically positive (C) A radioactive element having a half life period of 20 years will completely disintegrated in 40 years (D) The disintegration constant of a radioactive isotope is independent of pressure, temperature or concentration

Description : Pick out the wrong statement. (A) α-particle emission from a radioactive element makes it electrically negative (B) β-particle emission from a radioactive element makes it electrically ... ) The disintegration constant of a radioactive isotope is independent of pressure, temperature or concentration

Last Answer : (C) A radioactive element having a half life period of 20 years will completely disintegrated in 40 years

When ice cubes are made, the entropy of water – (1) does not change (2) decreases (3) increases (4) may either increase or decrease depending on the process used

Description : When ice cubes are made, the entropy of water – (1) does not change (2) decreases (3) increases (4) may either increase or decrease depending on the process used

Last Answer : (2) decreases Explanation: When water is frozen into ice, the temperature drops below 0°C. Since the entropy of the solid is less than that of the liquid, the entropy of the water (the system ... decrease is found by dividing the heat of fusion of ice by the temperature for the reversible pathway.

The density of the liquid when heated (1) decreases (2) increases (3) does not change (4) may increase of decrease depending on pressure

Description : The density of the liquid when heated (1) decreases (2) increases (3) does not change (4) may increase of decrease depending on pressure

Last Answer : (1) decreases Explanation: The mass density of a material varies with temperature and pressure. Increasing the temperature of a substance (with some exceptions) decreases its density by increasing the volume of ... bottom to top of the fluid due to the decrease of the density of the heated fluid.

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Last Answer : C) Remain unchanged

When ice cubes are made, the entropy of water (1) does not change (2) decreases (3) increases (4) may either increase or decrease depending on the process used

Description : When ice cubes are made, the entropy of water (1) does not change (2) decreases (3) increases (4) may either increase or decrease depending on the process used

Last Answer : decreases

The density of the liquid when heated (1) decreases (2) increases (3) does not change (4) may increase of decrease depending on pressure

Description : The density of the liquid when heated (1) decreases (2) increases (3) does not change (4) may increase of decrease depending on pressure

Last Answer : decreases

Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Description : Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Last Answer : (A) Increases

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Description : As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Last Answer : (C) Increases

With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Description : With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Last Answer : (B) Decreases

The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Last Answer : (B) Increases

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Description : With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Last Answer : (B) Decreases

With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Description : With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Last Answer : (B) Decreases

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (A) Increases

With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (A) Increases

If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (C) Remains unchanged

At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : C) Remains unchanged

In `beta-` decay `n//p` ratio` :` a)May inrease or decrease b) Remains constant c)Decreases d)Increases

Description : In `beta-` decay `n//p` ratio` :` a)May inrease or decrease b) Remains constant c)Decreases d)Increases

Last Answer : In `beta-` decay `n//p` ratio` :` a)May inrease or decrease b) Remains constant c)Decreases ... B. may increase or decrease C. increases D. decreases

In `alpha-` decay , `n//p` ratio `:` a)May inrease or decrease b) Remains constant c)Decreases d)Increases

Description : In `alpha-` decay , `n//p` ratio `:` a)May inrease or decrease b) Remains constant c)Decreases d)Increases

Last Answer : In `alpha-` decay , `n//p` ratio `:` a)May inrease or decrease b) Remains constant c) ... off decrease B. remains constant C. decreases D. increases

Ratio of primary air to secondary air increases with increase in the rank of coal, because the (A) High rank coals have higher amount of volatile matter (B) Ratio of fixed carbon to volatile matter increases (C) Oxygen content progressively decreases (D) Calorific value of the coal increases

Description : Ratio of primary air to secondary air increases with increase in the rank of coal, because the (A) High rank coals have higher amount of volatile matter (B) Ratio of fixed carbon to volatile matter increases (C) Oxygen content progressively decreases (D) Calorific value of the coal increases

Last Answer : (B) Ratio of fixed carbon to volatile matter increases

If speed of rotation of the earth increases, the weight of the body – (1) decreases (2) increases (3) remains the same (4) may increase or decrease

Description : If speed of rotation of the earth increases, the weight of the body – (1) decreases (2) increases (3) remains the same (4) may increase or decrease

Last Answer : (1) decreases Explanation: The weight of a body on the earth is the amount of gravitational pull on it exerted by the earth. Similarly there is another force exerted on a body on earth, that ... under the influence of the centrifugal force and the weight of the body will seem to have decreased.

If cream is removed from milk, its density – (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Description : If cream is removed from milk, its density – (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Last Answer : (1) Increases Explanation: The density of pure fresh milk being on the average 1.032, while the density of fat globules is about 0.86. It follows that the removal of cream will increase the density, while the addition of water will decrease it.

After storage, the strength of cement (A) Decreases (B) Increases (C) Remains same (D) May increase or decrease

Description : After storage, the strength of cement (A) Decreases (B) Increases (C) Remains same (D) May increase or decrease

Last Answer : Answer: Option A

If cream is removed from milk, its density (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Description : If cream is removed from milk, its density (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Last Answer : Increases

If speed of rotation of the earth increases, the weight of the body (1) decreases (2) increases (3) remains the same (4) may increase or decrease

Description : If speed of rotation of the earth increases, the weight of the body (1) decreases (2) increases (3) remains the same (4) may increase or decrease

Last Answer : decreases

If the baffle spacing in a shell and tube heat exchanger increases, then the Reynolds number of the shell side fluid (A) Remains unchanged (B) Increases (C) Increases or decreases depending on number of shell passes (D) Decreases

Description : If the baffle spacing in a shell and tube heat exchanger increases, then the Reynolds number of the shell side fluid (A) Remains unchanged (B) Increases (C) Increases or decreases depending on number of shell passes (D) Decreases

Last Answer : (D) Decreases

With increase in temperature, the rate constant obeying Arrhenius equation (A) Increases (B) Decreases (C) Decreases exponentially (D) Can either increase or decrease; depends on the frequency factor

Description : With increase in temperature, the rate constant obeying Arrhenius equation (A) Increases (B) Decreases (C) Decreases exponentially (D) Can either increase or decrease; depends on the frequency factor

Last Answer : (C) Decreases exponentially

In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Description : In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Last Answer : (B) Decreases

With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Description : With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Last Answer : (B) Decreases

In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Description : C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Last Answer : (D) May increase or decrease, depends on combustibles

With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Description : With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Description : The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Last Answer : (A) Decreases

You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Description : You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Last Answer : a. Remain approximately constant

You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Description : You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Last Answer : a. Remain approximately constant

With increase in pump speed, its NPSH requirement (A) Decreases (B) Increases (C) Remains unaltered (D) Can either increase or decrease; depends on other factors

Description : With increase in pump speed, its NPSH requirement (A) Decreases (B) Increases (C) Remains unaltered (D) Can either increase or decrease; depends on other factors

Last Answer : (B) Increases

With increases in pressure, the conversion of Ammonium carbamate into urea (A) Increases (B) Decreases (C) Remains unaltered (D) Can either increase or decrease depends on biuret content

Description : With increases in pressure, the conversion of Ammonium carbamate into urea (A) Increases (B) Decreases (C) Remains unaltered (D) Can either increase or decrease depends on biuret content

Last Answer : (A) Increases