The capacity of highest storage tank with efficient standby pump should be higher of the following figures a)1/4 the maximum water consumption in 24 hours b)1/3 the normal water consumption in 24 hours c)1/4 the normal water consumption in 24 hours. d) a or b* e) b or c f) a of c

The capacity of highest storage tank with efficient standby pump should be higher of the  following figures  
a)1/4 the maximum water consumption in 24 hours  
b)1/3 the normal water consumption in 24 hours  
c)1/4 the normal water consumption in 24 hours.  
d) a or b*
e) b or c
f) a of c
by

1 Answer

Answer :

d) a or b*
by

Related questions

The pumping system should be capable of supplying the normal quantity of water required in 24 hours in a)12 hours or less b) 16 hours or less c) 20 hours or less* d) 8 hours or less

Description : The pumping system should be capable of supplying the normal quantity of water required in 24 hours in a)12 hours or less b) 16 hours or less c) 20 hours or less* d) 8 hours or less

Last Answer : c) 20 hours or less*

The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Description : The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Last Answer : b) 24 hours*

How much power should a standby generator put out to maintain the average US household for 24 hours?

Description : How much power should a standby generator put out to maintain the average US household for 24 hours?

Last Answer : The amount of power a standby generator should put out to maintain the avg. US household for a one day is 20 watts system. This a standard amount watts to power you home and today they more selection in watts to power the house more than one day.

If first class Brick is immersed in water for 24 hours it should not absorb water by weight more than a) 10% b) 15% c) 20% * d) 25%

Description : If first class Brick is immersed in water for 24 hours it should not absorb water by weight more than a) 10% b) 15% c) 20% * d) 25%

Last Answer : c) 20% *

Normal life of detonators is e. 5 years f. 10 years g. 7 years * h. 6 years.

Description : Normal life of detonators is e. 5 years f. 10 years g. 7 years * h. 6 years.

Last Answer : g. 7 years *

The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Description : The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Last Answer : b) Ultimate bearing capacity*

Method of maintaining fires in furnace during standby periods without undue consumption of fuel is called (A) Back draughting (B) Banking (C) Under pressurising (D) None of these

Description : Method of maintaining fires in furnace during standby periods without undue consumption of fuel is called (A) Back draughting (B) Banking (C) Under pressurising (D) None of these

Last Answer : (B) Banking

How to build the load cases when one pump is standby and other one is running?

Description : How to build the load cases when one pump is standby and other one is running?

Last Answer : For running pump : The line temp will be given as normal case. For standby pump : ambient temp will be given upto the isolation valve and average temp will be from the valve to the branch of the running line .

The maximum permissible speed recommended for Indian Railways for 1 in 8 and half crossing is a)16 kmph* b) 20 kmph c)24 kmph

Description : The maximum permissible speed recommended for Indian Railways for 1 in 8 and half crossing is a)16 kmph* b) 20 kmph c)24 kmph

Last Answer : a)16 kmph*

The main drawback of centrifugal pump is a)necessity of priming b) discharge from pump varies with the load of water c) For high heads efficiency is low up to 50% d) the suction lift is limited to 6 metre e) all of the above*

Description : The main drawback of centrifugal pump is a)necessity of priming b) discharge from pump varies with the load of water c) For high heads efficiency is low up to 50% d) the suction lift is limited to 6 metre e) all of the above*

Last Answer : e) all of the above*

Purpose of standby E/F protection in SUT/UT?

Description : Purpose of standby E/F protection in SUT/UT? 

Last Answer : Back up for LV winding, LV neutral CT- CDG 12 – resistance earthing – relay set high time delay to discriminate with LV feeder and trip transformer if sustained E/F, also protects neutral earthing resistor.

The internal size of bio latrine tank is (a) 1200mm. x 1200mm. x 670mm. (b) 1200mm. x 670mm. x 1200mm.* (c) 1200mm. x 760mm. x 1200mm. (d) None of these

Description : The internal size of bio latrine tank is (a) 1200mm. x 1200mm. x 670mm. (b) 1200mm. x 670mm. x 1200mm.* (c) 1200mm. x 760mm. x 1200mm. (d) None of these

Last Answer : (b) 1200mm. x 670mm. x 1200mm.*

Free board given in septic tank is about (a) 100 mm (b) 200 mm (c) 300 mm* (d) 500 mm

Description : Free board given in septic tank is about (a) 100 mm (b) 200 mm (c) 300 mm* (d) 500 mm

Last Answer : (c) 300 mm*

Effective depth of septic tank of 10 users is about (a) 1.0 m (b) 1.2 m* (c) 1.7 m (d) 2.0 m

Description : Effective depth of septic tank of 10 users is about (a) 1.0 m () 1.2 m* (c) 1.7 m (d) 2.0 m

Last Answer : b) 1.2 m*

In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B

Description : In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B

Last Answer : (a ) L = 3 B*

Indicate which of the statement is incorrect (a) The detritus tank is type of a grit chamber (b) In detritus tank, velocity of flow is further reduced (c) Grit chambers are provided in the sewage treatment process to remove the heavier inorganic matter as grit, sand etc. from the sewage (d) None of them*

Description : Indicate which of the statement is incorrect (a) The detritus tank is type of a grit chamber (b) In detritus tank, velocity of flow is further reduced (c) Grit chambers are provided in the sewage ... to remove the heavier inorganic matter as grit, sand etc. from the sewage (d) None of them*

Last Answer : (d) None of them*

A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Description : A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Last Answer : (B) A cylinder and a plunger

Definition of minor bridge e) Single span less than 12m f) Total linear water way less than 18m g) Both a) & b)* h) None of the above

Description : Definition of minor bridge e) Single span less than 12m f) Total linear water way less than 18m g) Both a) & b)* h) None of the above

Last Answer : g) Both a) & b)*

Norms for No. of seats at recommended level at Cat. E stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. E stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (b) 0.4 Nds*

Latrines & urinals must be provided on these type of stations as per minimum essential facility criteria (a) A, B, C, D, E & F type station (b) A,B,C,D & E type station* (c) A,B,C & D type station (d) A, B & C type station

Description : Latrines & urinals must be provided on these type of stations as per minimum essential facility criteria (a) A, B, C, D, E & F type station (b) A,B,C,D & E type station* (c) A,B,C & D type station (d) A, B & C type station

Last Answer : (b) A,B,C,D & E type station*

The project report of final location survey gives tabulated statement of the following (a) Curve abstract (b) Gradient abstract (c) Bridge abstract (d) Important bridges (e) Station machinery (f) Stations and stations sites (g) All the above*

Description : The project report of final location survey gives tabulated statement of the following (a) Curve abstract (b) Gradient abstract (c) Bridge abstract (d) Important bridges (e) Station machinery (f) Stations and stations sites (g) All the above*

Last Answer : g) All the above*

In areas where there is severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339* b) One coat of zinc chromate priming to IS : 104 e) Two cover coats of red oxide paint to IS :123 f) One coat of zinc chrome - red oxide priming to IS : 2074

Description : In areas where there is severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339* b) One coat of zinc chromate priming to IS : 104 e) Two cover coats of red oxide paint to IS :123 f) One coat of zinc chrome - red oxide priming to IS : 2074

Last Answer : a) Two coats of aluminium paint to IS : 2339*

Pipe A can fill a water tank in 8 hours, Pipe B can fill the same tank in 12 hours and Pipe C can empty the tank in 24 hours. If all three pipes are opened together, in how many hours will the tank be completely filled or empty? a) 4.8 hours b) 5 hours c) 5.4 hours d) 6 hours e) 7.2 hours

Description : Pipe A can fill a water tank in 8 hours, Pipe B can fill the same tank in 12 hours and Pipe C can empty the tank in 24 hours. If all three pipes are opened together, in how many hours will the tank be completely filled or empty? a) 4.8 hours b) 5 hours c) 5.4 hours d) 6 hours e) 7.2 hours

Last Answer : If all the three pipes are opened together, in one hour they will fill 1/8 + 1/12 – 1/24 = (3+2-1)/24 = 1/6 part of tank. So, to fill it completely it will take 6 hours. Answer is: d)

The main importance of ARM micro-processors is providing operation with ______ A. Low cost and low power consumption B. Higher degree of multi-tasking C. Lower error or glitches D. Efficient memory management

Description : The main importance of ARM micro-processors is providing operation with ______ A. Low cost and low power consumption B. Higher degree of multi-tasking C. Lower error or glitches D. Efficient memory management

Last Answer : A. Low cost and low power consumption 

The minimum essential facility at each type of stations A to F consist of (a) Booking facility (b) Drinking Water (c) Waiting hall/shed (d) All the above*

Description : The minimum essential facility at each type of stations A to F consist of (a) Booking facility (b) Drinking Water (c) Waiting hall/shed (d) All the above*

Last Answer : (d) All the above*

Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Description : Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Last Answer : a) Rate of wear

The capacity of automatic flushing cistern connected with three urinal shall be (a) 05 litrs. (b) 10 litrs. (c) 12.5 litrs.* (d) None of these

Description : The capacity of automatic flushing cistern connected with three urinal shall be (a) 05 litrs. (b) 10 litrs. (c) 12.5 litrs.* (d) None of these

Last Answer : (c) 12.5 litrs.*

The capacity of automatic flushing cistern connected with two urinal shall be (a) 10 litrs.* (b) 12.5 litrs. (c) 05 litrs. (d) None of these

Description : The capacity of automatic flushing cistern connected with two urinal shall be (a) 10 litrs.* (b) 12.5 litrs. (c) 05 litrs. (d) None of these

Last Answer : (a) 10 litrs.*

The capacity of automatic flushing cistern connected with one urinal shall be (a) 05 litrs. (b) 10 litrs. (c) 12.5 litrs. (d) None of these

Description : The capacity of automatic flushing cistern connected with one urinal shall be (a) 05 litrs. (b) 10 litrs. (c) 12.5 litrs. (d) None of these

Last Answer : (a) 05 litrs.

The capacity of high level flushing cistern is generally (a) 7.5 ltrs. (b) 10 ltrs.* (c) 12.5 ltrs. (d) None of these

Description : The capacity of high level flushing cistern is generally (a) 7.5 ltrs. (b) 10 ltrs.* (c) 12.5 ltrs. (d) None of these

Last Answer : b) 10 ltrs.*

The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Description : The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Last Answer : a) Shearing strength of soil and its angle of repose*

To provide inverted filter to improve the hearing capacity of soil the plasticity index of blanketing material should not be greater than a) 15* b) 20 c) 27 d) 35

Description : To provide inverted filter to improve the hearing capacity of soil the plasticity index of blanketing material should not be greater than a) 15* b) 20 c) 27 d) 35

Last Answer : a) 15*

To provide inverted filter to improve the bearing capacity of soil the liquid limit of blanketing material should not be greater than a) 5 b) 20 c) 27 d) 35

Description : To provide inverted filter to improve the bearing capacity of soil the liquid limit of blanketing material should not be greater than a) 5 b) 20 c) 27 d) 35

Last Answer : d) 35

Two pipes fills a tank in 12 hours and 15 hours respectively while a third pipe empties the tank in 18 hours. !f all three pipes operate simultaneously, in what time will the tank be full? a) 10 hours b) 10 10/17 hours c) 11 hours d) 9 hours e) 12 1/17 hours

Description : Two pipes fills a tank in 12 hours and 15 hours respectively while a third pipe empties the tank in 18 hours. !f all three pipes operate simultaneously, in what time will the tank be full? a) 10 hours b) 10 10/17 hours c) 11 hours d) 9 hours e) 12 1/17 hours

Last Answer : b) 10 10/17 hours

Life of Portion mainly depend upon? (i) Quality of packing (ii) Storage condition (iii) Quality of packing and storage condition.* (iv) Ingredients of portions

Description : Life of Portion mainly depend upon? (i) Quality of packing (ii) Storage condition (iii) Quality of packing and storage condition.* (iv) Ingredients of portions

Last Answer : (iii) Quality of packing and storage condition.*

Terracotta is used in buildings for a) Storage b) Insulation c) Ornamental work* d) Sewer pipe

Description : Terracotta is used in buildings for a) Storage b) Insulation c) Ornamental work* d) Sewer pipe

Last Answer : c) Ornamental work*

fter storage, strength of cement a) Decreases* b) Increases c) Remains same d) Depends upon the type of cement

Description : fter storage, strength of cement a) Decreases* b) Increases c) Remains same d) Depends upon the type of cement

Last Answer : a) Decreases*

In how many time final grinding should be done of new AT weld ? (i) Just after the welding (ii) After 8 hrs of welding (iii) With in 24 hrs* (iv) None of the above

Description : In how many time final grinding should be done of new AT weld ? (i) Just after the welding (ii) After 8 hrs of welding (iii) With in 24 hrs* (iv) None of the above

Last Answer : iii) With in 24 hrs*

In how many time rough riding should be done of new AT weld ? (i) Just after the welding* (ii) After 8 hrs of welding (iii) After 24 hrs (iv) None of the above

Description : In how many time rough riding should be done of new AT weld ? (i) Just after the welding* (ii) After 8 hrs of welding (iii) After 24 hrs (iv) None of the above

Last Answer : i) Just after the welding*

Surface preparation for Metallising the abrasives used for final cleaning is a) Chilled iron grit G.24, as defined in BS : 2451 b) Washed salt free angular silica sand of mesh size 12 to 30 with a minimum of 40% retained on a 20 mesh c) either (a) or (b) * d) d) neither (a) or (b)

Description : Surface preparation for Metallising the abrasives used for final cleaning is a) Chilled iron grit G.24, as defined in BS : 2451 b) Washed salt free angular silica sand of mesh size 12 to 30 with a minimum of 40% retained on a 20 mesh c) either (a) or (b) * d) d) neither (a) or (b)

Last Answer : c) either (a) or (b) *

Norms for No. of seats at recommended level at Cat. D stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. D stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (b) 0.4 Nds*

Norms for No. of seats at recommended level at Cat. C stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. C stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (b) 0.4 Nds*

Norms for No. of seats at recommended level at Cat. B stn. is (a) 0.4 Ndb * (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. B stn. is (a) 0.4 Ndb * (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (a) 0.4 Ndb

Norms for No. of seats at recommended level at Cat. A stn. is (a) 0.4 Ndb* (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. A stn. is (a) 0.4 Ndb* (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (a) 0.4 Ndb*

Main advantage of 3-piece P F Mould is? (i) To overcome fin defect.* (ii) To prevent the flaw of molten metal (iii) To make proper weld size (iv) None to the above

Description : Main advantage of 3-piece P F Mould is? (i) To overcome fin defect.* (ii) To prevent the flaw of molten metal (iii) To make proper weld size (iv) None to the above

Last Answer : (i) To overcome fin defect.*

In a sedimentation tank, the detention period for water ranges from __________ hours. (A) 2 to 4 (B) 8 to 12 (C) 16 to 20 (D) 24 to 32

Description : In a sedimentation tank, the detention period for water ranges from __________ hours. (A) 2 to 4 (B) 8 to 12 (C) 16 to 20 (D) 24 to 32

Last Answer : (A) 2 to 4

Tap A can fill a tank of 1000 litres capacity in 14 hours. It can fill a tank of ……… litres in 7 hours.

Description : Tap A can fill a tank of 1000 litres capacity in 14 hours. It can fill a tank of ……… litres in 7 hours.

Last Answer : Tap A can fill a tank of 1000 litres capacity in 14 hours. It can fill a tank of ……… litres in 7 hours.

Two pipes can fill a tank in 20 and 24 minutes respectively and another pipe can empty 3 gallons per minute. All the three pipes working together can fill the tank in 15 minutes. The capacity of the tank in gallons is: a)100 b)110 c)120 d)140

Description : Two pipes can fill a tank in 20 and 24 minutes respectively and another pipe can empty 3 gallons per minute. All the three pipes working together can fill the tank in 15 minutes. The capacity of the tank in gallons is: a)100 b)110 c)120 d)140

Last Answer : c)120

A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Description : A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Last Answer : C2s

My toilet tank fills about 4 seconds every 24 hours.

Description : My toilet tank fills about 4 seconds every 24 hours.

Last Answer : answer:First off, I don't know what 4 seconds every 24 hours means, but I'm assuming that your tank is filling four times every day, even when the fixture isn't used. If we accept the results ... pipe and examine it for pinholes or cracks. And welcome to ask-public, btw. Stay dry; stick around.