Description : MBG loading stands for a)MineralBroad gauge loading b) Modified Broad gauge loading* c)MediumBroad gauge loading d) None of above
Last Answer : b) Modified Broad gauge loading*
Description : The strength of a bridge is termed as MBG loading of 1987. MBG refers to a) Model Broad Gauge b) Modified Budget Grant c) Model Budget grant d) Modified Broad Gauge*
Last Answer : d) Modified Broad Gauge*
Description : RBG loading stands for a)Revised Broad gauge loading b) Rolling Broad gauge loading c)Railway Broad gauge loading d) None of above
Last Answer : a)Revised Broad gauge loading
Description : Centre to Centre spacing of formation for double railway line for Broad Gauge is a) 1676 mm b) 4725 mm c) 4265mm d) 5300 mm*
Last Answer : d) 5300 mm*
Description : On Broad Gauge tracks Banner flag at a level crossing shall be provided at a distance of--- ---------- from ends of check rail before opening the gate for road traffic. a) 5 meters* b) 3 meters c) 6 meters d) 30 meters
Last Answer : a) 5 meters*
Description : On Broad gauge tracks whistle indicator shall be provided at a distance of ---------- from level crossing along the track a) 400 meters b) 600 meters* c) 350 meters d) 500 meters
Last Answer : b) 600 meters*
Description : Minimum radius of curve on Broad gauge a. 175 meter* b. 215 meter c. 146 meter d. 200 meter
Last Answer : a. 175 meter*
Description : What is the standard distance between lines in Broad Gauge a. 1670 mm b. 1676 mm* c. 1665 mm d. 1680 mm
Last Answer : b. 1676 mm*
Description : What do you mean by BG a. Big Gauge b. Broad Gauge* c. Buffer gauge d. None of above
Last Answer : b. Broad Gauge*
Description : Gauge conversion means: (a) Converting MG to BG (b) Converting NG to MG (c) Converting NG to BG (d) Converting MG/NG to BG*
Last Answer : (d) Converting MG/NG to BG*
Description : Marking on weld should be done which side? (i) Non gauge face side of A.T. weld * (ii) Gauge face side of A.T. weld (iii) On web of non gauge face side of A.T. weld (iv) On web of gauge face side of A.T. weld
Last Answer : (i) Non gauge face side of A.T. weld
Description : Which gauge is used to measure the height of rail at the time of aligning of rails for AT welding? (i) Height gauge.* (ii) Vertical gauge (iii) Horizontal gauge (iv) As decided by site supervisor
Last Answer : (iv) As decided by site supervisor
Description : Finished tolerance on 10 cm long st. edge at the centre on gauge side shall be? (i) ± 0.4 mm (ii) ± 0.1 mm (iii) ± 0.2 mm (iv) ± 0.3 mm*
Last Answer : iv) ± 0.3 mm*
Description : Finished tolerance on 1 Mt. st. edge at the centre on gauge side shall be? (i) ± 0.2 mm (ii) ± 0.3 mm (iii) ± 0.5 mm* (iv) ± 1.0 mm
Last Answer : (iii) ± 0.5 mm*
Description : Which gauge is used to measure finishing tolerances . (i) Tilted gauge (ii) Filter gauge (iii) Meter gauge (iv) Filler gauge.*
Last Answer : (iv) Filler gauge.*
Description : The Height Gauge for a level crossing should be located at least --------- from the gate post a) 3 meters b) 5 meters c) 8 meters* d) 10 meters
Last Answer : c) 8 meters*
Description : Flood level gauge to be marked a) commencing from bed level to top b) commencing from bottom of girder towards bed level* c) commencing from Rail level d) commencing from Danger level
Last Answer : b) commencing from bottom of girder towards bed level*
Description : Flood level gauge to be marked in a) All important bridges* b) All major bridges c) All minor & major bridges d) All bridges
Last Answer : a) All important bridges*
Description : Elcometer is used to measure the ……….. a) cross level b) Gauge c) Thickness of paint* d) All the above
Last Answer : c) Thickness of paint*
Description : The height gauge need to be provided in a) ROB b) RUB* c) FOB d) Fly Over
Last Answer : b) RUB*
Description : The ratio of maximum cant e and gauge G in India is about a)1 / 100 b) 1 / 50 c)1 /10* d) 1 / 25
Last Answer : c)1 /10*
Description : The train runs faster on BG than on MG rail because its speed is directly proportional to a) Weight of the train* b) Gauge width c)Policy of Railway Board d) Length of the train
Last Answer : a) Weight of the train*
Description : Clear perpendicular distance between inner faces of two rails is a. Gauge of track* b. Inner gauge c. Wheel base d. Wheel gauge
Last Answer : a. Gauge of track*
Description : Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)
Last Answer : a) Rate of wear
Description : RBG loading caters for maaaaximum axle load of…….tones for locomotive with trailing loadof…… tonnes/metre of track with maximum axle load of…….tonnes for wagons a)22.9,7.67,25 b)22.5,7.67,22.9* c)25,7.67,22.9, d)None of above
Last Answer : b)22.5,7.67,22.9*
Description : GML loading caters for maaaaximum axle load of…….tonnes for locomotive with trailing load of………tonnes/metre. a)22.9,7.67* b)22.5,7.67 c)25,7.67 d)None of above
Last Answer : a)22.9,7.67*
Description : tructural steel for railway loading above 0oC temperature conforms to -- a) IS 2062 grade A b) IS 2062 grade B* c) IS 2062 grade C d) None of the above
Last Answer : b) IS 2062 grade B*
Description : CC Crib stands for a) Cement concrete b) Criss crossing c) Christ church* d) None of the above
Last Answer : c) Christ church*
Description : O.D.C. Stands for (a) On direct current (b) Over dimensioned consignment* (c) None of them (d) Operating & gate
Last Answer : (b) Over dimensioned consignment*
Description : How will you differentiate between broad gauge and narrow gauge? -Geography
Last Answer : Indian railway runs on multiple gauge operations, i.e. broad gauge, metre gauge and narrow gauge. Broad gauge and narrow gauge can be differentiated based on their measurements and the distance they can be used to ... . Running track in broad gauge is 77,347 km, and in narrow gauge, it is 2474 km.
Description : What is the width of broad gauge railway line? -General Knowledge
Last Answer : answer:
Description : What are Broad Gauge, Metre Gauge and Narrow Gauge in Indian Railway? -General Knowledge
Last Answer : Broad gauge, meter gauge, narrow gauge indicate the width between two rails. The difference in their width is as follows: Broad gauge: 1.676 meters. Narrow gauge: 0.762 meters.
Description : The width or the broad gauge track in Indian railway is (a) 1.676 m (b) 1.114 m (c) 1.98 m (d) 2.55 m
Last Answer : Ans: (a)
Description : The longest distance covered by one Broad Gauge train in India is between (a) Kanniyakumari and Jammu Tawi (b) Guwahati and Tiruvananthpuram (c) New Delhi and Chennai (d) Gorakhpur and Cochin
Description : On Indian Railways standard length of rails for Broad Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)
Last Answer : D [42 ft (12.8 m)] Explanation: Indian Railways is divided into 18 zones. Recently added South Coast Railway zones in Indian Railway (2019).
Description : Minimum depth of ballast prescribed of Broad Gauge trunk lines of Indian Railways, is A. 20 cm B. 25 cm C. 30 cm D. 35 cm
Last Answer : B [25 cm]
Description : What is the width of broad gauge Railway line in India? A. 4 feet 5 inchs B. 5 feet 6 inchs C. 6 feet 5 inchs D. 7 feet 6 inch
Last Answer : B [5 feet 6 inchs] Explanation: The Indian Railways has currently 4 different gauges. The Broad Gauge which is 1676 mm or 5 feet 6 inches
Description : Which of the gauges is used in the hilly areas? A. Narrow Gauge B. Meter Gauge C. Broad Gauge D. Special Gauge
Last Answer : A [Narrow Gauge] Explanation: Narrow gauge is used in the hilly areas.
Description : If the ruling gradient is 1 in 150 on a particular section of a broad gauge track, the allowable ruling gradient on a 4° curve in the track will be : (a) 0.51% (b) 0.53% (c) 0.61% (d) 0.67%
Last Answer : (a) 0.51%
Description : Has mainline TV turned to crap since Lost ended?
Last Answer : LOST ended less than 4 months ago. Mainstream TV has been crap for longer than that.
Description : How Mainline showed reason and logic?
Last Answer : Feel Free to Answer
Description : What is mainline merchandising?
Last Answer : What is the answer ?
Description : Is it okay to shoot 12 gauge slugs out of a barrel with a modified choke tube in it?
Last Answer : Trenchcoat mafia? Of course it’s okay, try it out… let me know how it goes…
Description : The genetically-modified (GM) brinjal in India has been developed for (a) insect-resistance (b) enhancing shelf life (c) enhancing mineral content (d) drought-resistance.
Last Answer : (a) insect-resistance
Description : GMO stands for ____. a. genetically modified organism c. gross moldy oranges b. genetically manufactured oranges d. genetically malfunctioning organisms
Last Answer : a. genetically modified organism
Description : FLOPS stands for______ (A) Floating Point Operation Per Second (B) File Processing Operation Per Second (C) Floating Processing Operation Per Second (D) File Loading Operation Per Second
Last Answer : (A) Floating Point Operation Per Second
Description : What is the most important requirement for the people of a flood hit area?
Last Answer : Inoculation against cholera
Description : If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous
Last Answer : (c) Isotropic
Description : Both noting and protest are compulsory in case of A. Foreign Bills B. Inland Bills C. Foreign as well as Inland Bills D. None of them
Last Answer : C. Foreign as well as Inland Bills