imber having maximum resistance against white ants is obtained from a) Chir b) Sheesham c) Sal d) Teak*

imber having maximum resistance against white ants is obtained from a) Chir
b) Sheesham  
c) Sal  
d) Teak*
by

1 Answer

Answer :

d) Teak*
by

Related questions

The timber having maximum resistance against white ants, is obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Description : The timber having maximum resistance against white ants, is obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Last Answer : Answer: Option B

Which of the following trees yields hardwood a) Deodar b) Sheesham*/ c) Chir d) Pine

Description : Which of the following trees yields hardwood a) Deodar b) Sheesham*/ c) Chir d) Pine

Last Answer : b) Sheesham*/

The most valuable timber may be obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Description : The most valuable timber may be obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Last Answer : Answer: Option D

Best wood for wooden sleepers is A. Sal B. Teak C. Deodar D. Chir

Description : Best wood for wooden sleepers is A. Sal B. Teak C. Deodar D. Chir

Last Answer : B [Teak]

In which of the following pairs both trees yield soft wood? (A) Deodar and Shishum (B) Chir and sal (C) Sal and teak (D) Chir and deodar

Description : In which of the following pairs both trees yield soft wood? (A) Deodar and Shishum (B) Chir and sal (C) Sal and teak (D) Chir and deodar

Last Answer : Answer: Option D

Give one use of each: teak, sal, myrobalan, sisam, sandalwood, eucalyptus. -SST 10th

Description : Give one use of each: teak, sal, myrobalan, sisam, sandalwood, eucalyptus. -SST 10th

Last Answer : Teak: It is the most important of the deciduous trees. It is used for house construction, furniture, ship-building. It is hard and durable. It resists while ants and nails dor not rust in ... lofty stature. Its wood is raw material for the paper industry. Eucalyptus oil is also available from it.

In which forests are Teak and Sal are the principal trees? -Do You Know?

Description : In which forests are Teak and Sal are the principal trees? -Do You Know?

Last Answer : answer:

Sal and teak are found in

Description : Sal and teak are found in

Last Answer : Sal and teak are found in A. Tropical rain forest B. Tropical deciduous forest C. Temerature board leaf forest D. Temperature needle leaf forest

Tropical moist deciduous vegetation la to be found in Sahyadris, north-east plateau of the Peninsula and in the Shiwaliks. Which of the following is not a tree species of this group? (a) Teak (b) Sal (c) Sandalwood (d) Deodar

Description : Tropical moist deciduous vegetation la to be found in Sahyadris, north-east plateau of the Peninsula and in the Shiwaliks. Which of the following is not a tree species of this group? (a) Teak (b) Sal (c) Sandalwood (d) Deodar

Last Answer : Ans: (d)

Which of the following is not a species of tropical moist deciduous forests? (a) Mahagony (b) Sal (c) Shisham (d) Teak

Description : Which of the following is not a species of tropical moist deciduous forests? (a) Mahagony (b) Sal (c) Shisham (d) Teak

Last Answer : Ans: (a)

Wooden sleepers used on the girders of bridges, are generally made o A. Sal B. Teak C. Neem D. Deodar

Description : Wooden sleepers used on the girders of bridges, are generally made o A. Sal B. Teak C. Neem D. Deodar

Last Answer : B [Teak]

To which natural vegetation belt do Sal and Teak trees belong? (1) Temperate forests (2) Equatorial forests (3) Tropical deciduous forests (4) Mixed forests

Description : To which natural vegetation belt do Sal and Teak trees belong? (1) Temperate forests (2) Equatorial forests (3) Tropical deciduous forests (4) Mixed forests

Last Answer : (3) Tropical deciduous forests Explanation: The tropical and subtropical dry broadleaf forest biome, also known as tropical dry forest, is located at tropical and subtropical latitudes. Deciduous trees ... rosewood, belong to the moist deciduous forests which shed their leaves in the dry season.

A tropical deciduous plant special to the Deccan plateau is – (1) Teak (2) Shisam (3) Sandalwood (4) Sal

Description : A tropical deciduous plant special to the Deccan plateau is – (1) Teak (2) Shisam (3) Sandalwood (4) Sal

Last Answer : (3) Sandalwood Explanation: Teak, Sal, Sandalwood, Shisham and Mahua are some of the tropical deciduous trees that extend from the Shiwalik ranges in the north to the eastern flanks of the ... where it prefers hard rock, ferruginous soil-the conditions that produce a richer scent in the tree.

The common tree species in Nilgiri hills is – (1) Sal (2) Pine (3) Eucalyptus (4) Teak

Description : The common tree species in Nilgiri hills is – (1) Sal (2) Pine (3) Eucalyptus (4) Teak

Last Answer : (3) Eucalyptus Explanation: Nilgiri mountains are a range of mountains with at least 24 peaks above 2,000 metres (6,600 ft), in the westernmost part of Tamil Nadu state at the ... larger Western Ghats mountain chain making up the southwestern edge of the Deccan Plateau. Eucalyptus is common.

In which forests are Teak and Sal are the principal trees?

Description : In which forests are Teak and Sal are the principal trees?

Last Answer : Tropical moist deciduous

A tropical deciduous plant special to the Deccan plateau is (1) Teak (2) Shisam (3) Sandalwood (4) Sal

Description : A tropical deciduous plant special to the Deccan plateau is (1) Teak (2) Shisam (3) Sandalwood (4) Sal 

Last Answer : Sandalwood

To which natural vegetation belt do Sal and Teak trees belong ? (1) Temperate forests (2) Equatorial forests (3) Tropical deciduous forests (4) Mixed forests

Description : To which natural vegetation belt do Sal and Teak trees belong ? (1) Temperate forests (2) Equatorial forests (3) Tropical deciduous forests (4) Mixed forests

Last Answer : Tropical deciduous forests

Limestone is obtained from a) Igneous rocks b) Sedimentary rocks* c) Metamorphic rocks d) Plutonic rock

Description : Limestone is obtained from a) Igneous rocks b) Sedimentary rocks* c) Metamorphic rocks d) Plutonic rock

Last Answer : b) Sedimentary rocks*

Marble is obtained from a) Igneous rocks b) Sedimentary rocks c) Metamorphic rocks* d) Plutonic rock

Description : Marble is obtained from a) Igneous rocks b) Sedimentary rocks c) Metamorphic rocks* d) Plutonic rock

Last Answer : c) Metamorphic rocks*

Granite is obtained from a) Igneous rocks* b) Sedimentary rocks c) Metamorphic r

Description : Granite is obtained from a) Igneous rocks* b) Sedimentary rocks c) Metamorphic r

Last Answer : a) Igneous rocks*

The given figure is the diagrammatic representation of the E. coli vector pBR322. Which one of the given options correctly identifies its certain component(s)? Bam H1 Sal 1 Pvu II rop ori Pst I Pvu I Eco R I Cla Hin d III tet ampR R (a) ori-original restriction enzyme (b) rop-reduced osmotic pressure (c) HindIII, EcoRI - selectable markers (d) ampR, tetR–antibiotic resistance genes

Description : The given figure is the diagrammatic representation of the E. coli vector pBR322. Which one of the given options correctly identifies its certain component(s)? Bam H1 Sal 1 Pvu II rop ... reduced osmotic pressure (c) HindIII, EcoRI - selectable markers (d) ampR, tetR-antibiotic resistance genes

Last Answer : (d) ampR, tetR–antibiotic resistance genes

Which of the following trees yields hard wood? (A) Deodar (B) Chir (C) Shishum (D) Pine

Description : Which of the following trees yields hard wood? (A) Deodar (B) Chir (C) Shishum (D) Pine

Last Answer : Answer: Option C

Which of the following species of Pinus is commonly known as chir pine ......... a) P. roxburghii b) P. wallichiana c) P. insularis d) P. gerardiana

Description : Which of the following species of Pinus is commonly known as chir pine ......... a) P. roxburghii b) P. wallichiana c) P. insularis d) P. gerardiana

Last Answer : a) P. roxburghii

Sensitivity calibration against temp. variation shall be carried out. (i) At least once in month* (ii) quarterly. (iii) at least once in six months (iv) Any of above.

Description : Sensitivity calibration against temp. variation shall be carried out. (i) At least once in month* (ii) quarterly. (iii) at least once in six months (iv) Any of above.

Last Answer : i) At least once in month*

At the liquid limit a) The soil just begins to crumble when rolled into a thread b) The shearing strength against flowing is negligible c) The shearing strength against flowing is a small but definite* d) The soil will not get fully saturated

Description : At the liquid limit a) The soil just begins to crumble when rolled into a thread b) The shearing strength against flowing is negligible c) The shearing strength against flowing is a small but definite* d) The soil will not get fully saturated

Last Answer : c) The shearing strength against flowing is a small but definite

Putty is made up of a) White lead and turpentine b) Powdered chalk and raw linseed oil* c) Red lead and linseed oil d) Zinc oxide and boiled linseed oil

Description : Putty is made up of a) White lead and turpentine b) Powdered chalk and raw linseed oil* c) Red lead and linseed oil d) Zinc oxide and boiled linseed oil

Last Answer : b) Powdered chalk and raw linseed oil*

The commonly used lime in white washing is a) Hydraulic lime b) Slaked lime c) Plain lime d) White lime*

Description : The commonly used lime in white washing is a) Hydraulic lime b) Slaked lime c) Plain lime d) White lime*

Last Answer : d) White lime*

An artificial stone made from pieces of white marble, white cement and other coloring agents, generally used for floor and facing walls is known as a) Topaz b) Marble c) Terrazzo* d) Gneiss

Description : An artificial stone made from pieces of white marble, white cement and other coloring agents, generally used for floor and facing walls is known as a) Topaz b) Marble c) Terrazzo* d) Gneiss

Last Answer : c) Terrazzo*

The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above

Description : The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above

Last Answer : a) 5 cm, 10 cm, 60 cms*

The date of painting of steel work should be painted in white on the out side of the left girder a) of the 1st span only b) first span only but on all spans for Imp. Bridges* c) of the all spans d) None of the above

Description : The date of painting of steel work should be painted in white on the out side of the left girder a) of the 1st span only b) first span only but on all spans for Imp. Bridges* c) of the all spans d) None of the above

Last Answer : b) first span only but on all spans for Imp. Bridges*

Maximum height of low level cistern from top of W.C. pan should be (a) 65 cm. (b) 30 cm. (c) 8 (d) 120 cm. (e) 80 cm.

Description : Maximum height of low level cistern from top of W.C. pan should be (a) 65 cm. (b) 30 cm. (c) 8 (d) 120 cm. (e) 80 cm.

Last Answer : b) 30 cm. (c) 8

The amplitude of a wave is ______. (i) the distance the wave moves in one second (ii). the distance the wave moves in one time period of the wave (iii) the maximum distance moved by the medium particles on either side of the mean position* (iv) the distance equal to one wave length

Description : The amplitude of a wave is ______. (i) the distance the wave moves in one second (ii). the distance the wave moves in one time period of the wave (iii) the maximum distance moved by the medium particles on either side of the mean position* (iv) the distance equal to one wave length

Last Answer : iii) the maximum distance moved by the medium particles on either side of the mean position*

In which of the following directions, the strength of timber is maximum a) Parallel to grains* b) 45 degree to grains c) Perpendicular to grains d) same in all directions

Description : In which of the following directions, the strength of timber is maximum a) Parallel to grains* b) 45 degree to grains c) Perpendicular to grains d) same in all directions

Last Answer : a) Parallel to grains*

The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Description : The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Last Answer : b) Ultimate bearing capacity*

The maximum dry density to which a soil may be compacted to depends upon a) Soil water content * b) The process of compaction c) The voids ratio d) Is independent of the type of soil

Description : The maximum dry density to which a soil may be compacted to depends upon a) Soil water content * b) The process of compaction c) The voids ratio d) Is independent of the type of soil

Last Answer : a) Soil water content *

In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Description : In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Last Answer : a) 5 centimeter*

The minimum and maximum clearances of check rails at all BG level crossings shall be a) 51 to 57 mm* b) 44 to 48 mm c) 41 to 45 mm d) 55 to 70 mm

Description : The minimum and maximum clearances of check rails at all BG level crossings shall be a) 51 to 57 mm* b) 44 to 48 mm c) 41 to 45 mm d) 55 to 70 mm

Last Answer : a) 51 to 57 mm*

Speed breaker has to be provided on road approaches of level crossing at maximum feasible distance within Railway boundary but not exceeding a) 10 meters b) 15 meters c) 20 meters* d) 200 meters

Description : Speed breaker has to be provided on road approaches of level crossing at maximum feasible distance within Railway boundary but not exceeding a) 10 meters b) 15 meters c) 20 meters* d) 200 meters

Last Answer : c) 20 meters*

RBG loading caters for maaaaximum axle load of…….tones for locomotive with trailing loadof…… tonnes/metre of track with maximum axle load of…….tonnes for wagons a)22.9,7.67,25 b)22.5,7.67,22.9* c)25,7.67,22.9, d)None of above

Description : RBG loading caters for maaaaximum axle load of…….tones for locomotive with trailing loadof…… tonnes/metre of track with maximum axle load of…….tonnes for wagons a)22.9,7.67,25 b)22.5,7.67,22.9* c)25,7.67,22.9, d)None of above

Last Answer : b)22.5,7.67,22.9*

The maximum time lag between the primer coat and the Ist finishing coat shall not exceed a) 3 days b) 7 days* c) 4 days d) 12 days

Description : The maximum time lag between the primer coat and the Ist finishing coat shall not exceed a) 3 days b) 7 days* c) 4 days d) 12 days

Last Answer : b) 7 days*

The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Description : The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Last Answer : b) 24 hours*

Callendar Hamilton spans are normally available maximum up to a) 60 ft. b) 100 ft. c) 150 ft. d) 200 ft.*

Description : Callendar Hamilton spans are normally available maximum up to a) 60 ft. b) 100 ft. c) 150 ft. d) 200 ft.*

Last Answer : d) 200 ft.*

Speed restrictions is suggested for distressed bridges on Group II a) upto maximum of 15 kmph b) 25 kmph to 50 kmph* c) 75 kmph d) 60 kmph

Description : Speed restrictions is suggested for distressed bridges on Group II a) upto maximum of 15 kmph b) 25 kmph to 50 kmph* c) 75 kmph d) 60 kmph

Last Answer : b) 25 kmph to 50 kmph*

Speed restrictions is suggested for distressed bridges on Group I a) upto maximum of 15 kmph* b) 25 kmph c) 50 kmph

Description : Speed restrictions is suggested for distressed bridges on Group I a) upto maximum of 15 kmph* b) 25 kmph c) 50 kmph

Last Answer : a) upto maximum of 15 kmph*

Maximum tilt specified during sinking of well foundation is a) 1 in 10 b) 1 in 50 c) 1 in 100* d) 1 in 150

Description : Maximum tilt specified during sinking of well foundation is a) 1 in 10 b) 1 in 50 c) 1 in 100* d) 1 in 150

Last Answer : c) 1 in 100*

Maximum vertical clearance (VC) for a slab/ girder bridges with discharge above 3000 cumecs is a) 300 mm b) 1500 mm c) 1800 mm* d) 600 mm

Description : Maximum vertical clearance (VC) for a slab/ girder bridges with discharge above 3000 cumecs is a) 300 mm b) 1500 mm c) 1800 mm* d) 600 mm

Last Answer : c) 1800 mm*

The capacity of highest storage tank with efficient standby pump should be higher of the following figures a)1/4 the maximum water consumption in 24 hours b)1/3 the normal water consumption in 24 hours c)1/4 the normal water consumption in 24 hours. d) a or b* e) b or c f) a of c

Description : The capacity of highest storage tank with efficient standby pump should be higher of the following figures a)1/4 the maximum water consumption in 24 hours b)1/3 the normal water consumption in 24 hours c)1/4 the normal water consumption in 24 hours. d) a or b* e) b or c f) a of c

Last Answer : d) a or b*

The maximum height above rail level for B.G. goods platform is ……. Mm (a) 1000mm (b) 1050mm (c) 1065mm* (d) 1075mm

Description : The maximum height above rail level for B.G. goods platform is ……. Mm (a) 1000mm (b) 1050mm (c) 1065mm* (d) 1075mm

Last Answer : (c) 1065mm*

On B.G. maximum clearances of check rails at a level crossing are (a) 51 mm (b) 57mm* (c) 65mm (d) 70mm

Description : On B.G. maximum clearances of check rails at a level crossing are (a) 51 mm (b) 57mm* (c) 65mm (d) 70mm

Last Answer : (b) 57mm*

For A Class, the gross clearance of over maximum moving dimension for BG is (a) 100mm (b) 125mm (c) 150mm* (d) 175mm

Description : For A Class, the gross clearance of over maximum moving dimension for BG is (a) 100mm (b) 125mm (c) 150mm* (d) 175mm

Last Answer : (c) 150mm*