Back furrow is caused while plowing is done (a)center to side (b) side to center (c)one way plowing. (c) none of the above

Back furrow is caused while plowing is done  (a)center to side (b) side to center
(c)one way plowing. (c) none of the above
by

1 Answer

Answer :

a)center to side
by

Related questions

Dead furrow open furrow is called when plowing is done by (a) Center to side (b) side to center method (c) one way plowing (d) none of the above

Description : Dead furrow open furrow is called when plowing is done by (a) Center to side (b) side to center method (c) one way plowing (d) none of the above

Last Answer : (b) side to center method

Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.

Description : Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.

Last Answer : d.) Cutting and windrow.

At smaller disc angles , the draft tends to increase in disc plough because of a) Greater contact area between furrow wall and the convex side of the disc b) Increase in the side draft c) Greater throw of the soil d) All of the above

Description : At smaller disc angles , the draft tends to increase in disc plough because of a) Greater contact area between furrow wall and the convex side of the disc b) Increase in the side draft c) Greater throw of the soil d) All of the above

Last Answer : a) Greater contact area between furrow wall and the convex side of the disc

Dead furrow is made by: a. One way MB plough b. Two way MB plough c. Ridger d. Disc harrow

Description : Dead furrow is made by: a. One way MB plough b. Two way MB plough c. Ridger d. Disc harrow

Last Answer : a. One way MB plough

An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of operation is 2.0kmph, the area covered (ha), in 8-11day is given by: A. 1.85/1000k B. 28.8 x 10-2k C. k/6.56 D. 1.762k

Description : An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of operation is 2.0kmph, the area covered (ha), in 8-11day is given by: A. 1.85/1000k B. 28.8 x 10-2k C. k/6.56 D. 1.762k

Last Answer : B. 28.8 x 10-2k

Depth of working of a tillage implement is controlled by a) Furrow Wheel b) Gauge Wheel c) Cage Wheel d) Star Wheel

Description : Depth of working of a tillage implement is controlled by a) Furrow Wheel b) Gauge Wheel c) Cage Wheel d) Star Wheel

Last Answer : d) Star Wheel

A low mold board with gradual twist that completely invert the furrow slice with a minimum of breakup, thus covering vegetative matter thoroughly is called a. Stubble bottom b. sod bottom c. salted mould board d. general purpose bottom

Description : A low mold board with gradual twist that completely invert the furrow slice with a minimum of breakup, thus covering vegetative matter thoroughly is called a. Stubble bottom b. sod bottom c. salted mould board d. general purpose bottom

Last Answer : b. sod bottom

Planters differ from a seed drill in respect of- (A) kind of power transmission system (B)kind of metering mechanism (C)kind of furrow opener used (D)all of the above

Description : Planters differ from a seed drill in respect of- (A) kind of power transmission system (B)kind of metering mechanism (C)kind of furrow opener used (D)all of the above

Last Answer : (B)kind of metering mechanism

An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of the operation is 2.0kmph then the area covered (ha), in 8 hr day is given by: a) 1.85/1000k b) 28.8 * 10-2k c) k/6.456 d) 1.762k

Description : An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of the operation is 2.0kmph then the area covered (ha), in 8 hr day is given by: a) 1.85/1000k b) 28.8 * 10-2k c) k/6.456 d) 1.762k

Last Answer : b) 28.8 * 10-2k

The size of a seed rill is expressed by: A. Amount of seed sown per unit time. B. Length x width of the machine. C. Area covered per unit time. D. The number of furrow openers x distance between two furrow

Description : The size of a seed rill is expressed by: A. Amount of seed sown per unit time. B. Length x width of the machine. C. Area covered per unit time. D. The number of furrow openers x distance between two furrow

Last Answer : D. The number of furrow openers x distance between two furrow

Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments

Description : Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments

Last Answer : (b) Semi-arid conditions to place seed deep in moist soil

Variation in the drop size of seed can be minimised by (a) Using a short, smooth, small diameter tube with the discharge end close to bottom of furrow. (b) Discharging the seed directly from the metering device within a few centimetres of the furrow bottom. (c) Mechanically transferring the seeds from the metering unit in the furrow. (d) All of the above.

Description : Variation in the drop size of seed can be minimised by (a) Using a short, smooth, small diameter tube with the discharge end close to bottom of furrow. (b) Discharging the seed directly from ... (c) Mechanically transferring the seeds from the metering unit in the furrow. (d) All of the above.

Last Answer : d) All of the above.

How type furrow (or shovel) opener are especially suited to a. Stoney and root infested fields b. Poorly prepared beds in trashy soil c. Hard field with considerable debris and mulch d. None of the above

Description : How type furrow (or shovel) opener are especially suited to a. Stoney and root infested fields b. Poorly prepared beds in trashy soil c. Hard field with considerable debris and mulch d. None of the above

Last Answer : a. Stoney and root infested fields

A long jow mould board with a gradual twist (spiral) that completely inverts the furrow slice with a minimum of break up thus covering vegetative matter thoroughly is called a. Sod bottom b. Stubble bottom c. General bottom d. Slat bottom

Description : A long jow mould board with a gradual twist (spiral) that completely inverts the furrow slice with a minimum of break up thus covering vegetative matter thoroughly is called a. Sod bottom b. Stubble bottom c. General bottom d. Slat bottom

Last Answer : a. Sod bottom

…………………………... moves the trash and roots from ahead of shin towords the main furrow so as 10 ensure complete coverage by the plough bottom a. Coulter b. Jointer c. Mould board d. Shin

Description : …………………………... moves the trash and roots from ahead of shin towords the main furrow so as 10 ensure complete coverage by the plough bottom a. Coulter b. Jointer c. Mould board d. Shin

Last Answer : b. Jointer

Disc type furrow openers are especially suited to A. Stoney and root infested soils B. Poorly prepared bed in trashy soil C. Hard and sticky soil with considerable amount of debris and mulch D. All of the above

Description : Disc type furrow openers are especially suited to A. Stoney and root infested soils B. Poorly prepared bed in trashy soil C. Hard and sticky soil with considerable amount of debris and mulch D. All of the above

Last Answer : C. Hard and sticky soil with considerable amount of debris and mulch

Shoe type furrow openers especially suited to A. Stoney and root infested fields B. Poorly prepared bed in trashy soils C. Hard and sricky soil with considerable amount of mulch and debris D. All of the above

Description : Shoe type furrow openers especially suited to A. Stoney and root infested fields B. Poorly prepared bed in trashy soils C. Hard and sricky soil with considerable amount of mulch and debris D. All of the above

Last Answer : B. Poorly prepared bed in trashy soils

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

Center of resistence of a mould board plow less at distance equal to A. 1/4th the size of plow from the share wing B. 3/4th the size of plow from the share wing C. 2/3th the size of plow from the share wing D. 1/3th the size of plow from the share wing

Description : Center of resistence of a mould board plow less at distance equal to A. 1/4th the size of plow from the share wing B. 3/4th the size of plow from the share wing C. 2/3th the size of plow from the share wing D. 1/3th the size of plow from the share wing

Last Answer : B. 3/4th the size of plow from the share wing

.When the valves are carried in engine bioel at one side of each cylinder is called A. Valves in head arrangements B. L-head C. I-head D. None of the above

Description : .When the valves are carried in engine bioel at one side of each cylinder is called A. Valves in head arrangements B. L-head C. I-head D. None of the above

Last Answer : B. L-head

Swinging drawbar is advantageous because it help A. Taking short turn with machine wider than the tractor B. Reduces side draft C. Leaves only small area uncovered at corner of the fied D. All the above

Description : Swinging drawbar is advantageous because it help A. Taking short turn with machine wider than the tractor B. Reduces side draft C. Leaves only small area uncovered at corner of the fied D. All the above

Last Answer : A. Taking short turn with machine wider than the tractor

.The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Description : .The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Last Answer : D. Soft Centre steel

An engine is called I or valve in head engine when a) Valve are immediately above the cylinder b) Both valves are on one side c) Both valves are on opposite direction d) None of the above

Description : An engine is called I or valve in head engine when a) Valve are immediately above the cylinder b) Both valves are on one side c) Both valves are on opposite direction d) None of the above

Last Answer : d) None of the above

Tension on the slack side in chain drive is A)more than on tight side. B)less than on tight side. C)zero. D)equal to tight

Description : Tension on the slack side in chain drive is A)more than on tight side. B)less than on tight side. C)zero. D)equal to tight

Last Answer : C)zero

Total force exerted upon the implement by a power unit called a)pull. B) draft C)side draft. D)unit draft

Description : Total force exerted upon the implement by a power unit called a)pull. B) draft C)side draft. D)unit draft

Last Answer : a)pull

Horizontal component of pull perpendicular to the line of motion is called: A.Draft B.Side draft C.Transerve component D. Pull

Description : Horizontal component of pull perpendicular to the line of motion is called: A.Draft B.Side draft C.Transerve component D. Pull

Last Answer : B.Side draft

Differential lock offers advantage of A. Better drawbar pull when drive wheel are under different conditions B. Easier to plant in straight rows C. Reduces stearing effort and side draft when operating with certain implements D. All of the above

Description : Differential lock offers advantage of A. Better drawbar pull when drive wheel are under different conditions B. Easier to plant in straight rows C. Reduces stearing effort and side draft when operating with certain implements D. All of the above

Last Answer : D. All of the above

Blades of disc harrow are sharpened from the_______ side penetrate more readily than blades sharpened from the__________ side a) convex, concave c) concave, convex b) Front, rear d) Rear, front

Description : Blades of disc harrow are sharpened from the_______ side penetrate more readily than blades sharpened from the__________ side a) convex, concave c) concave, convex b) Front, rear d) Rear, front

Last Answer : c) concave, convex

knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Description : knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Last Answer : a)Increase the co-efficient of friction between crop stalk machine

Tension on slack side in case of chain drive a) Lesser than on tight side b) Greater than on tight side c) Zero d) Equal to that on tight side

Description : Tension on slack side in case of chain drive a) Lesser than on tight side b) Greater than on tight side c) Zero d) Equal to that on tight side

Last Answer : c) Zero

346- Side deflection of stalk can be minimized by.... (a) Having a short cutting stroke (b) Having an arrangement to obtain two cuts per stroke (c) Both (a) & (b) (d) None of the above

Description : 346- Side deflection of stalk can be minimized by.... (a) Having a short cutting stroke (b) Having an arrangement to obtain two cuts per stroke (c) Both (a) & (b) (d) None of the above

Last Answer : (c) Both (a) & (b)

The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above

Description : The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above

Last Answer : D. All of the above

Puddling is done to: A. Reduce percolation of water B. Kill weeds C. Pulverize soil D. Level the field

Description : Puddling is done to: A. Reduce percolation of water B. Kill weeds C. Pulverize soil D. Level the field

Last Answer : A. Reduce percolation of water

For maximum moisture conservation ploughing is done with A. mb plough b. cultivator c. chisel plough d. dice harrow

Description : For maximum moisture conservation ploughing is done with A. mb plough b. cultivator c. chisel plough d. dice harrow

Last Answer : c. chisel plough

Puddling is done to achieve : a. Soft soil bed b. Non leaching of water c. Size reduction of clods d. Conservation of moisture

Description : Puddling is done to achieve : a. Soft soil bed b. Non leaching of water c. Size reduction of clods d. Conservation of moisture

Last Answer : b. Non leaching of water

Puddling is done to: a) Reduce percolation of water b) Kill weeds c) Pulverise soil d) Level the fields

Description : Puddling is done to: a) Reduce percolation of water b) Kill weeds c) Pulverise soil d) Level the fields

Last Answer : a) Reduce percolation of water

Should plowing crops (food) under be a crime?

Description : Should plowing crops (food) under be a crime?

Last Answer : answer:Sometimes farmers will remove crops to irradicate a pest. I just pulled up a bunch of yummy basil plants at a local, organic farm this past weekend because they were infested with a pest. No ... . This has happened quite a lot through history, btw. Simple economics. Would you work for free?

Hi, everyone I'm planning to start my own plowing business in West Michigan. This will be a new adventure for me and I'm in need for some pointers. Please help!

Description : Hi, everyone I'm planning to start my own plowing business in West Michigan. This will be a new adventure for me and I'm in need for some pointers. Please help!

Last Answer : Serious Good customer report seems to be the best thing for I-do-a-service-for-you kind of jobs. Knowing people's first names, being friendly, being prompt especially. People really love having ... phones? It's not as intrusive as a phone call, but good, honest information is always appreciated.

Unusual Gypsy Plowing Report

Description : Why is it said that the gypsy is not used to plowing?

Last Answer : This is often said when someone gets from a lighter physical job to a heavier one and gets tired quickly. Of course, this can be said not only for work, but when someone starts exercising, but it is very difficult for him. Etc ... 

What does contor plowing involve?

Description : What does contor plowing involve?

Last Answer : Contour ploughing is ploughing along the contour lines on sloping land. It is done to minimise soil erosion from rain washing soil downhill.

.Laying out of field in lands is essential when working with a. Two way plough b. One way plough c. Disc harrow d. Cultivator

Description : .Laying out of field in lands is essential when working with a. Two way plough b. One way plough c. Disc harrow d. Cultivator

Last Answer : b. One way plough

Irrigation for cereal crop is generally done by a. Check flooding b. Basic flooding c. Furrow d. Subway surface irrigation

Description : Irrigation for cereal crop is generally done by a. Check flooding b. Basic flooding c. Furrow d. Subway surface irrigation

Last Answer : a. Check flooding

In case of cereal crops, the irrigation is generally done by a. Check method b. Furrow method c. Sprinkler method d. Border method

Description : In case of cereal crops, the irrigation is generally done by a. Check method b. Furrow method c. Sprinkler method d. Border method

Last Answer : a. Check method

verticalsuctioninmouldboardploughis______whereashorizontalsuctionis______

Description : verticalsuctioninmouldboardploughis______whereashorizontalsuctionis______

Last Answer : .0.3to0.5cm,0.5cm

Byincreasingdiskangle,depthpenetration_____beoverwithofcut_______

Description : Byincreasingdiskangle,depthpenetration_____beoverwithofcut_______

Last Answer : .decreases,increases

A paddy transplanter uses either root wash type seedlings or __________ seedlings.

Description : A paddy transplanter uses either root wash type seedlings or __________ seedlings.

Last Answer : soil bearing

An indigenous plough cuts a _________furrow cross sect

Description : An indigenous plough cuts a _________furrow cross sect

Last Answer : Trapizoidal

The unit of filter medium resistance is________

Description : The unit of filter medium resistance is________

Last Answer : L^-1

The average working speed of a hand operated chaff fitted with two knives is _________ rev/min.

Description : The average working speed of a hand operated chaff fitted with two knives is _________ rev/min.

Last Answer : 35

In a combine harvester the peripheral speed of the cylinder ranges between ________ m/min.

Description : In a combine harvester the peripheral speed of the cylinder ranges between ________ m/min.

Last Answer : 1200 to 1500