Which of the following condition is essential for observing Fraunhofer diffraction? A. Source must be close to slit and screen should be at infinite distance B. Both source and screen must be close to slit C. Source must be at infinity and screen should be close to the slit D. Both source and screen must be at infinity

Which of the following condition is essential for observing Fraunhofer diffraction?
A. Source must be close to slit and screen should be at infinite distance B. Both source and screen must be close to slit
C. Source must be at infinity and screen should be close to the slit D. Both source and screen must be at infinity
by

1 Answer

Answer :

D. Both source and screen must be at infinity
by

Related questions

The condition for minima in Fraunhofer diffraction for single slit is asinθ = mλWhat is ‘θ’? A. Angle of incidence of incident rays at the slit B. Angle at which diffracted rays strikes the screen C. Angle between slit and screen D. Angle of diffraction at which rays are diffracted at slit

Description : The condition for minima in Fraunhofer diffraction for single slit is asinθ = mλWhat is ‘θ’? A. Angle of incidence of incident rays at the slit B. Angle at which diffracted rays strikes the screen C. Angle between slit and screen D. Angle of diffraction at which rays are diffracted at slit

Last Answer : D. Angle of diffraction at which rays are diffracted at slit

In Fraunhofer diffraction pattern for single slit, a central maximum is obtained when angle of diffraction q is equal to zero. What it actually indicates? A. All the diffracted rays are parallel and focused by slit at a single point on screen B. All the diffracted rays are perpendicular and focused by slit at a single point on screen C. The rays are diffracted by the slit in all the directions D. The rays are reflected by the slit

Description : In Fraunhofer diffraction pattern for single slit, a central maximum is obtained when angle of diffraction q is equal to zero. What it actually indicates? A. All the diffracted rays are parallel and focused ... are diffracted by the slit in all the directions D. The rays are reflected by the slit

Last Answer : A. All the diffracted rays are parallel and focused by slit at a single point on screen

Fraunhofer diffraction at a Plane Grating What is the meaning of grating element for a diffraction grating? A It is the width of a single slit B. It is the width of the opaque space C. It is the distance between two slits D. It is the width of diffraction grating

Description : Fraunhofer diffraction at a Plane Grating What is the meaning of grating element for a diffraction grating? A It is the width of a single slit B. It is the width of the opaque space C. It is the distance between two slits D. It is the width of diffraction grating

Last Answer : C. It is the distance between two slits

How the intensity of secondary maxima varies in case of Fraunhofer diffraction pattern for single slit? A. Intensity of secondary maxima decreases on either sides B. Intensity of secondary maxima remains constant on either side C. Intensity increases and decreases alternately D. Intensity of secondary maxima increases on either sides

Description : How the intensity of secondary maxima varies in case of Fraunhofer diffraction pattern for single slit? A. Intensity of secondary maxima decreases on either sides B. Intensity of ... C. Intensity increases and decreases alternately D. Intensity of secondary maxima increases on either sides

Last Answer : A. Intensity of secondary maxima decreases on either sides

Fraunhofer diffraction is observed when __________. A. Only screen is placed at finite distance B. source is placed at finite distance C. neither source nor screen is at finite distance D. None of these

Description : Fraunhofer diffraction is observed when __________. A. Only screen is placed at finite distance B. source is placed at finite distance C. neither source nor screen is at finite distance D. None of these

Last Answer : D. None of these

In Fresnel diffraction A. source of light is kept at infinite distance from the aperture B. source of light is kept at finite distance from the aperture C. Convex lens used D. aperture width is selected so that it can acts as a point source

Description : In Fresnel diffraction A. source of light is kept at infinite distance from the aperture B. source of light is kept at finite distance from the aperture C. Convex lens used D. aperture width is selected so that it can acts as a point source

Last Answer : B. source of light is kept at finite distance from the aperture

here are two types of diffraction Fresnel and __________. A. Michelson B. De Broglie C. Fraunhofer D. Huygens

Description : here are two types of diffraction Fresnel and __________. A. Michelson B. De Broglie C. Fraunhofer D. Huygens

Last Answer : C. Fraunhofer

In Fraunhofer diffraction wave front used is __________. A. Spherical B. Circular C. Plane D. Conical 71.In diffraction pattern of monochromatic light the bright bands formed are __________. A. of uniform intensity B. of non-uniform intensity C. of uniform width D. is of different colors

Description : In Fraunhofer diffraction wave front used is __________. A. Spherical B. Circular C. Plane D. Conical 71.In diffraction pattern of monochromatic light the bright bands formed are __________. A. of uniform intensity B. of non-uniform intensity C. of uniform width D. is of different colors

Last Answer : A. of uniform intensity

In Fraunhofer diffraction, the incident wave front should be ….. A. elliptical B. Plane C. Spherical D. Cylindrical

Description : In Fraunhofer diffraction, the incident wave front should be ….. A. elliptical B. Plane C. Spherical D. Cylindrical

Last Answer : B. Plane

The phenomenon of diffraction can be understood using A. Huygens principle B. Fraunhofer C. Uncertainty principle D. Fresnel

Description : The phenomenon of diffraction can be understood using A. Huygens principle B. Fraunhofer C. Uncertainty principle D. Fresnel

Last Answer : A. Huygens principle

Fresnel’s type diffraction is observed when __________. A. Only screen is placed at finite distance B. Only source is placed at finite distance C. Both source and screen are at finite distance D. Neither source nor screen is at finite distance

Description : Fresnel’s type diffraction is observed when __________. A. Only screen is placed at finite distance B. Only source is placed at finite distance C. Both source and screen are at finite distance D. Neither source nor screen is at finite distance

Last Answer : C. Both source and screen are at finite distance

The diffraction observed by diffraction grating can also be Termed as __________. A. Single slit diffraction B. double slit Diffraction C. multiple Slit Diffraction D. Fresnel’s Diffraction

Description : The diffraction observed by diffraction grating can also be Termed as __________. A. Single slit diffraction B. double slit Diffraction C. multiple Slit Diffraction D. Fresnel’s Diffraction

Last Answer : A. Single slit diffraction

A diffraction grating is optically equivalent to a multiple slit system in which the number of slit , N is typically A.2000/cm B.3000/cm C.5000/cm D.1000/cm

Description : A diffraction grating is optically equivalent to a multiple slit system in which the number of slit , N is typically A.2000/cm B.3000/cm C.5000/cm D.1000/cm

Last Answer : C.5000/cm

significant diffraction of X ray can be obtained A. By a single slit B. By a double slit C. By diffraction D. By Atomic crystal

Description : significant diffraction of X ray can be obtained A. By a single slit B. By a double slit C. By diffraction D. By Atomic crystal

Last Answer : A. By a single slit

Coherent light of a single frequency passes through a double slit with a separation d, to produce a pattern on a screen as distance D from the slits. What would cause the separation between adjacent minima on the screen to increase? A. A. increase the index of refraction of the medium in which the setup is immersed B. increase the separation d between the slits C. increase the distance D. increase the frequency of the incident light

Description : Coherent light of a single frequency passes through a double slit with a separation d, to produce a pattern on a screen as distance D from the slits. What would cause the separation between adjacent ... d between the slits C. increase the distance D. increase the frequency of the incident light

Last Answer : B. increase the separation d between the slits

as the order increases, the width of a dark band in diffraction Patterns __________. A. Increases B. Decreases C. Does not change D. becomes infinity

Description : as the order increases, the width of a dark band in diffraction Patterns __________. A. Increases B. Decreases C. Does not change D. becomes infinity

Last Answer : Increases

In a Young's double-slit experiment the center of a bright fringe occurs wherever waves from the slits differ in the distance they travel by a multiple of: A. a fourth of a wavelength B. a half a wavelength C. a wavelength D. three-fourths of a wavelength

Description : In a Young's double-slit experiment the center of a bright fringe occurs wherever waves from the slits differ in the distance they travel by a multiple of: A. a fourth of a wavelength B. a half a wavelength C. a wavelength D. three-fourths of a wavelength

Last Answer : C. a wavelength

Extended source is needed in A. Young's double slit experiment B. Bi prism Experiment C. Newton’s Ring Experiment D. None of them

Description : Extended source is needed in A. Young's double slit experiment B. Bi prism Experiment C. Newton’s Ring Experiment D. None of them

Last Answer : C. Newton’s Ring Experiment

Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to width the pinhole B. A bright point of the width equal to width the pinhole but of less intensity C. A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Description : Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to ... A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Last Answer : C. A bright ring at the centre surrounded by alternate dark and bright rings

The dark lines constituting the absorption spectrum exhibited by sunlight are frequently called: A. Fresnel lines B. Fraunhofer lines C. Fermi lines D. Franklin lines

Description : The dark lines constituting the absorption spectrum exhibited by sunlight are frequently called: A. Fresnel lines B. Fraunhofer lines C. Fermi lines D. Franklin lines

Last Answer : B. Fraunhofer lines

A slit of width ‘a’ is illuminated by white light. For what value of ‘a’ will the first minimum for red light fall at an angle of 300 wavelength of red light is 6500 A0 A. 1.1 x 10 -3 cm B. 1.4 X 10 -4 cm C. 1.3 X 10 -4 cm D. 1.6 X 10 -4 cm

Description : A slit of width ‘a’ is illuminated by white light. For what value of ‘a’ will the first minimum for red light fall at an angle of 300 wavelength of red light is 6500 A0 A. 1.1 x 10 -3 cm B. 1.4 X 10 -4 cm C. 1.3 X 10 -4 cm D. 1.6 X 10 -4 cm

Last Answer : C. 1.3 X 10 -4 cm

Newton’s light illustrate the phenomenon of (a) Interference (b) Diffraction (c) Dispersion (d) Polarisation

Description : Newton’s light illustrate the phenomenon of (a) Interference (b) Diffraction (c) Dispersion (d) Polarisation

Last Answer : (a) Interference

Which of the following phenomenon produces colors in soap bubble? (a) Interference (b) Diffraction (c) Polarization (d) Dispersion

Description : Which of the following phenomenon produces colors in soap bubble? (a) Interference (b) Diffraction (c) Polarization (d) Dispersion

Last Answer : (a) Interference

What is the effect of increasing the number of slits on the intensity of Central maxima of diffraction pattern of a diffraction grating? A. Intensity of central maxima will decrease B. Intensity of central maxima will increase C. There will not be any effect D. Diffraction pattern will disappear

Description : What is the effect of increasing the number of slits on the intensity of Central maxima of diffraction pattern of a diffraction grating? A. Intensity of central maxima will decrease B. Intensity ... maxima will increase C. There will not be any effect D. Diffraction pattern will disappear

Last Answer : B. Intensity of central maxima will increase

Diffraction is special type of __________. A. Reflection B. Refraction C. Interference D. Polarization

Description : Diffraction is special type of __________. A. Reflection B. Refraction C. Interference D. Polarization

Last Answer : B. Refraction

X-ray diffraction can be observed by using __________. A. Diffraction Grating B. Rock salt crystal C. Convex lens D. Michelson’s interferometer

Description : X-ray diffraction can be observed by using __________. A. Diffraction Grating B. Rock salt crystal C. Convex lens D. Michelson’s interferometer

Last Answer : A. Diffraction Grating

.The grating used to observe, diffraction of visible light can have approximately __________. A.300 lines per cm B.3000 lines per cm, C. 15000 lines per cm D. 30 lines per cm

Description : .The grating used to observe, diffraction of visible light can have approximately __________. A.300 lines per cm B.3000 lines per cm, C. 15000 lines per cm D. 30 lines per cm

Last Answer : C. 15000 lines per cm

On a rainy day, small oil films on water show brilliant colors'. This is due to A. dispersion B. interference C. diffraction D. Polarization 49.The critical angle for a beam of light passing from water into air is 48.8 °. This means that all light rays with an angle of incidence greater than this angle will be A. absorbed B. totally reflected C. Partially reflected and partially transmitted D. Totally transmitted

Description : On a rainy day, small oil films on water show brilliant colors'. This is due to A. dispersion B. interference C. diffraction D. Polarization 49.The critical angle for a beam of light ... A. absorbed B. totally reflected C. Partially reflected and partially transmitted D. Totally transmitted

Last Answer : C. Partially reflected and partially transmitted

Colors in thin films are because of A. Dispersion C. Interference B. Compton effect D. Diffraction

Description : Colors in thin films are because of A. Dispersion C. Interference B. Compton effect D. Diffraction

Last Answer : C. Interference

Which of the following does not support the wave nature of light A. Interference C. Polarisation B. Compton effect D. Diffraction

Description : Which of the following does not support the wave nature of light A. Interference C. Polarisation B. Compton effect D. Diffraction

Last Answer : B. Compton effec

What is the highest order spectrum which may be seen with monochromatic light of wavelength 5000 A0by means of diffraction grating with 5000 lines/cm? A. 2 B. 4 C. 8 D. 16

Description : What is the highest order spectrum which may be seen with monochromatic light of wavelength 5000 A0by means of diffraction grating with 5000 lines/cm? A. 2 B. 4 C. 8 D. 16

Last Answer : B. 4

In plane transmission grating, the angle of diffraction for second order maxima for wavelength 5 x 10 -5 cm is 30 0. Calculate the number of lines in one centimeter of the grating surface. A. 1000 lines/cm B. 5000 lines/cm C. 500 lines/cm D. 10000 lines/cm

Description : In plane transmission grating, the angle of diffraction for second order maxima for wavelength 5 x 10 -5 cm is 30 0. Calculate the number of lines in one centimeter of the grating surface. A. 1000 lines/cm B. 5000 lines/cm C. 500 lines/cm D. 10000 lines/cm

Last Answer : B. 5000 lines/cm

To find prominent diffraction , the size of diffraction object should be A. greater than wavelength of light used B. comparable to order of wavelength of light C. less than wavelength of light used D. none of these.

Description : To find prominent diffraction , the size of diffraction object should be A. greater than wavelength of light used B. comparable to order of wavelength of light C. less than wavelength of light used D. none of these.

Last Answer : B. comparable to order of wavelength of light

The wave nature of light is demonstrated by which of the following? A. The photoelectric effect B. Color C. The speed of light D. Diffraction

Description : The wave nature of light is demonstrated by which of the following? A. The photoelectric effect B. Color C. The speed of light D. Diffraction

Last Answer : D. Diffraction

hat is the name of the process whereby waves travel around corners and obstacles in their paths? A. Reflection B. Refraction C Interference D. Diffraction

Description : hat is the name of the process whereby waves travel around corners and obstacles in their paths? A. Reflection B. Refraction C Interference D. Diffraction

Last Answer : D. Diffraction

A thin film is observed in white light. The color of the film seen at a particular point depends upon (a)Location of observer (b)Width of the source (c) Distance of the source (d) Brightness of the source

Description : A thin film is observed in white light. The color of the film seen at a particular point depends upon (a)Location of observer (b)Width of the source (c) Distance of the source (d) Brightness of the source

Last Answer : (a)Location of observer

The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Description : The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Last Answer : (d) All of above

In interference experiment, by keeping all other parameters constant, if you see the thin film interference from different angles, you will observe (a)Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Description : In interference experiment, by keeping all other parameters constant, if you see the thin film interference from different angles, you will observe (a)Uniform illumination of screen (b) Uniform ... c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Last Answer : (d) Few colored bands and then general illumination

In interference experiment, monochromatic light is replaced by white light, we will see (a) Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Description : In interference experiment, monochromatic light is replaced by white light, we will see (a) Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Last Answer : (d) Few colored bands and then general illumination

.If we narrow the distance between two slits in Young’s experiment the fringes width __________. A. Increases B. Decreases C. Remains same D. becomes zero

Description : .If we narrow the distance between two slits in Young’s experiment the fringes width __________. A. Increases B. Decreases C. Remains same D. becomes zero

Last Answer : B. Decreases

.Fringe spacing is defined as the distance between two Consecutive __________. A. Crests B. Bright fringes only C. Dark fringes only D. Bright or dark fringes

Description : .Fringe spacing is defined as the distance between two Consecutive __________. A. Crests B. Bright fringes only C. Dark fringes only D. Bright or dark fringes

Last Answer : A. Crests

In Newton’s rings experiment, if monochromatic source of light is replaced by another monochromatic source of higher wavelength. What will be the effect on radius (or diameter)? (a) Radius (or diameter) will decrease (b) Radius (or diameter) will increase (c) There will be no effect (d) Radius (or diameter) will remain constant but there will be more brightness

Description : In Newton's rings experiment, if monochromatic source of light is replaced by another monochromatic source of higher wavelength. What will be the effect on radius (or diameter)? (a) Radius (or ... be no effect (d) Radius (or diameter) will remain constant but there will be more brightness

Last Answer : (b) Radius (or diameter) will increase

The speed of any mechanical wave as it propagates through a medium is dependent mainly on the A. frequency of the wave source B. wavelength C. period of the wave D. type of medium through which the wave travels E. amplitude

Description : The speed of any mechanical wave as it propagates through a medium is dependent mainly on the A. frequency of the wave source B. wavelength C. period of the wave D. type of medium through which the wave travels E. amplitude

Last Answer : D. type of medium through which the wave travels

Whose principle or law states that each point on a wave front may be considered a new wave source? Is it: A. Snell's Law B. Huygens’s Principle C. Young's Law D. Hertz's Law.

Description : Whose principle or law states that each point on a wave front may be considered a new wave source? Is it: A. Snell's Law B. Huygens’s Principle C. Young's Law D. Hertz's Law.

Last Answer : B. Huygens’s Principle

Line spectrum is obtained on the screen in the form of lines if the slit in front of the source is a) narrow square b) broad square c) narrow rectangle d) broad rectangle

Description : Line spectrum is obtained on the screen in the form of lines if the slit in front of the source is a) narrow square b) broad square c) narrow rectangle d) broad rectangle

Last Answer : c) narrow rectangle

A wedge shaped thin has (a) Non-uniform thickness (b) Zero thickness at one end and it increasing towards other end (c) Zero thickness at both ends (d) Thickness increase and decrease alternately

Description : A wedge shaped thin has (a) Non-uniform thickness (b) Zero thickness at one end and it increasing towards other end (c) Zero thickness at both ends (d) Thickness increase and decrease alternately

Last Answer : b) Zero thickness at one end and it increasing towards other end

A wedge shaped thin has A. Non-uniform thickness B. Zero thickness at one end and it increasing towards other end C. Zero thickness at both ends D. Thickness increase and decrease alternately

Description : A wedge shaped thin has A. Non-uniform thickness B. Zero thickness at one end and it increasing towards other end C. Zero thickness at both ends D. Thickness increase and decrease alternately

Last Answer : B. Zero thickness at one end and it increasing towards other end

In the diagram shows below rays are coming from infinity and after passing through both the lenses meet on a screen placed at a distance of 30 cm from

Description : In the diagram shows below rays are coming from infinity and after passing through both the lenses meet on a screen placed at a distance of 30 cm from

Last Answer : In the diagram shows below rays are coming from infinity and after passing through both the lenses ... Calculate the focal length of the concave lens.

Newton’s rings are formed because of interference between the light Reflected from (a) Upper surface of Plano-convex lens and lower surface of plane glass plate (b) Lower surface of Plano-convex lens and upper surface of plane glass plate (c) Lower and upper surface of Plano-convex (d) Lower and upper surfaces of plane glass plate

Description : Newton's rings are formed because of interference between the light Reflected from (a) Upper surface of Plano-convex lens and lower surface of plane glass plate (b) Lower surface of Plano-convex ... c) Lower and upper surface of Plano-convex (d) Lower and upper surfaces of plane glass plate

Last Answer : (b) Lower surface of Plano-convex lens and upper surface of plane glass plate

Why in Newton’s rings setup, the beam splitter (mirror) is kept at 450? (a) It allows light rays to incident at 450over the top surface of Plano convex lens (b) It allows light rays to incident uniformly over the top surface of Plano convex lens (c) It allows light rays to incident parallel over the top surface of Plano convex lens (d) It allows light rays to incident at 900over the top surface of Plano convex lens

Description : Why in Newton's rings setup, the beam splitter (mirror) is kept at 450? (a) It allows light rays to incident at 450over the top surface of Plano convex lens (b) It allows light rays to ... Plano convex lens (d) It allows light rays to incident at 900over the top surface of Plano convex lens

Last Answer : (d) It allows light rays to incident at 900over the top surface of Plano convex lens