The deformation of body is the change in its a) Shape b) Length c) Area d) All of above

The deformation of body is the change in its
a) Shape b) Length c) Area d) All of above
by

1 Answer

Answer :

d) All of above
by

Related questions

The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Description : The substance which undergo plastic deformation until break is a) Brittle b) Ductile c) Hard d) Soft

Last Answer : d) Soft

Deformation drag, which is caused by widespread deformation of fluid around the immersed body(A) Occurs when NReis very small(B) Is primarily a friction drag(C) Is independent of body length(D) Depends mainly on cross-sectional shape

Description : Deformation drag, which is caused by widespread deformation of fluid around the immersed body (A) Occurs when NRe is very small (B) Is primarily a friction drag (C) Is independent of body length (D) Depends mainly on cross-sectional shape

Last Answer : (A) Occurs when NRe is very small

A wire loop is moved parallel to a uniform magnetic field. The induced emf in the loop: a. depends on the shape b. depends on area c. depends on nature of loop d. zero

Description : A wire loop is moved parallel to a uniform magnetic field. The induced emf in the loop: a. depends on the shape b. depends on area c. depends on nature of loop d. zero

Last Answer : d. zero

The current flowing in a coil due to induced emf depends upon: a. shape of coil b. resistance of coil c. area of coil d. magnetic flux

Description : The current flowing in a coil due to induced emf depends upon: a. shape of coil b. resistance of coil c. area of coil d. magnetic flux

Last Answer : a. shape of coil

A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

When stress changes the length of a body it is called a) Tensile stress b) Shear stress c) Compressive stress d) Yield stress

Description : When stress changes the length of a body it is called a) Tensile stress b) Shear stress c) Compressive stress d) Yield stress

Last Answer : a) Tensile stress

When stress changes the shape then it is called: a) Shear stress b) Tensile stress c) Compressive stress d)volumetric stress

Description : When stress changes the shape then it is called: a) Shear stress b) Tensile stress c) Compressive stress d)volumetric stress

Last Answer : a) Shear stress

An element which has a definite volume and shape is called: a) Liquid b) Solid c) Gas d) Vapour

Description : An element which has a definite volume and shape is called: a) Liquid b) Solid c) Gas d) Vapour

Last Answer : b) Solid

At yield point of a test piece, the material (A) Obeys Hooke's law (B) Behaves in an elastic manner (C) Regains its original shape on removal of the load(D) Undergoes plastic deformation

Description : At yield point of a test piece, the material  (A) Obeys Hooke's law  (B) Behaves in an elastic manner  (C) Regains its original shape on removal of the load  (D) Undergoes plastic deformation 

Last Answer : (D) Undergoes plastic deformation 

A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Description : A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Last Answer : (A) Plastic

Specific resistance of a wire a. will depend on its length b. will depend on its radius c. will depend on the type of material of the wire d. will depend on none of the above

Description : Specific resistance of a wire a. will depend on its length b. will depend on its radius c. will depend on the type of material of the wire d. will depend on none of the above

Last Answer : c. will depend on the type of material of the wire

A conductor of length L has current I passing through it, when it is placed parallel to a magnetic field. The force experienced by the conductor will be (a) zero (b) BLI (c) B2LI (d) BLI2

Description : A conductor of length L has current I passing through it, when it is placed parallel to a magnetic field. The force experienced by the conductor will be (a) zero (b) BLI (c) B2LI (d) BLI2

Last Answer : (a) zero

Which one of the following physical quantities is independent of relativistic speed? a) Mass b) Length c) Time d) Charge

Description : Which one of the following physical quantities is independent of relativistic speed? a) Mass b) Length c) Time d) Charge

Last Answer : d) Charge

The self-inductance of a long solenoid with a turns per unit length is: a. L = μ nA/ l b. L = μ n2 A/ l c. L = μ n2 A l d. L = μ n l/ A

Description : The self-inductance of a long solenoid with a turns per unit length is: a. L = μ nA/ l b. L = μ n2 A/ l c. L = μ n2 A l d. L = μ n l/ A

Last Answer : d. L = μ n l/ A

A solenoid has n turns and length l. If length is reduced to l/2 and turns are doubled then magnetic field B produced by it becomes equal to a) 2B b) 4B c) 1/2 B d) None of these

Description : A solenoid has n turns and length l. If length is reduced to l/2 and turns are doubled then magnetic field B produced by it becomes equal to a) 2B b) 4B c) 1/2 B d) None of these

Last Answer : a) 2B

In a beam, the neutral plane (A) May be its centre (B) Passes through the C.G. of the area of cross-section (C) Does not change during deformation (D) None of these

Description : In a beam, the neutral plane  (A) May be its centre  (B) Passes through the C.G. of the area of cross-section  (C) Does not change during deformation  (D) None of these 

Last Answer : (C) Does not change during deformation

The highest stress that a material can withstand for a specified length of time without excessive deformation is called the __________ strength. (A) Creep (B) Endurance (C) Fatigue (D) None of these

Description : The highest stress that a material can withstand for a specified length of time without excessive deformation is called the __________ strength. (A) Creep (B) Endurance (C) Fatigue (D) None of these

Last Answer : Option A

The deformation per unit length is called (a) Strain (b) Stress (c) Elasticity (d) None of these

Description : The deformation per unit length is called (a) Strain (b) Stress (c) Elasticity (d) None of these

Last Answer : (a) Strain

A magnetic field acts on a charged particles so as to change its: a. speed b. energy c. direction of motion d. all of these

Description : A magnetic field acts on a charged particles so as to change its: a. speed b. energy c. direction of motion d. all of these

Last Answer : Only direction of motion will change ...it means velocity will change but speed same

Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Description : Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Last Answer : (b) high permeability and low hysteresis loss

The induced emf in a coil depends upon: a. Strength of magnetic field b. Resistance of the coil c. area of the coil d. All of them

Description : The induced emf in a coil depends upon: a. Strength of magnetic field b. Resistance of the coil c. area of the coil d. All of them

Last Answer : d. All of them

Which of the following will produce an induced emf: a. Changing area of coil b. Changing magnetic flux c. changing orientation of coil d. all of them

Description : Which of the following will produce an induced emf: a. Changing area of coil b. Changing magnetic flux c. changing orientation of coil d. all of them

Last Answer : c. changing orientation of coil

The magnetic flux φB through a plane element of area A⃗ in a uniform magnetic field B⃗⃗ is minimum at a) θ = 900 b) θ = 00 c) θ = 1800 d) None of these

Description : The magnetic flux φB through a plane element of area A⃗ in a uniform magnetic field B⃗⃗ is minimum at a) θ = 900 b) θ = 00 c) θ = 1800 d) None of these

Last Answer : a) θ = 900

The number of electric field lines passing through a certain element of area is called: (a) Electric lines of force (b) Electric intensity (c) Electric flux (d) None of these

Description : The number of electric field lines passing through a certain element of area is called: (a) Electric lines of force (b) Electric intensity (c) Electric flux (d) None of these

Last Answer : (c) Electric flux

Black body radiation spectrum is an example of a) band spectra b) continuous spectra c) discrete spectra d) atomic spectra

Description : Black body radiation spectrum is an example of a) band spectra b) continuous spectra c) discrete spectra d) atomic spectra

Last Answer : b) continuous spectra

The radiations emitted by human body lies in a) Infrared region b) Ultraviolet region c) Visible region d) None of the above

Description : The radiations emitted by human body lies in a) Infrared region b) Ultraviolet region c) Visible region d) None of the above

Last Answer : a) Infrared region

A body will behave as an “ideal black body” when it acts as: a) A perfect absorber b) A perfect radiator c) A body to have absorption power equal to one d) All of the above

Description : A body will behave as an “ideal black body” when it acts as: a) A perfect absorber b) A perfect radiator c) A body to have absorption power equal to one d) All of the above

Last Answer : d) All of the above

Sometimes, when you change the running direction of a E/R blower (from supply to exhaust) it trips. Why?

Description : Sometimes, when you change the running direction of a E/R blower (from supply to exhaust) it trips. Why?

Last Answer : If the flaps of the blower are not set or opened properly or the filters are clogged, the air supply is affected and the blower may be overloaded causing it to trip. Ask E/O for more information.

If a motor is wound star and you want to change to delta what should you do?

Description : If a motor is wound star and you want to change to delta what should you do?

Last Answer : Open the terminal connection box. Remove the shorting link connecting the common connection (star) point of A2, B2 and C2. With the 3 phase windings marked A1A2, B1B2, C1C2, connect A2 to B1, B2 to C1 and C2 to A1.

How does this cause a rotation to change?

Description : How does this cause a rotation to change?

Last Answer : Due to the change in phase sequence, the rotating magnetic field changes direction and the rotor rotates in the opposite direction.

“The direction of induced current is always so as to oppose the change which causes the Current” is the statement of: a. Faraday’s law b. Lenz’s Law c. Ohm’s Law d. Kirchoff’s rule.

Description : “The direction of induced current is always so as to oppose the change which causes the Current” is the statement of: a. Faraday’s law b. Lenz’s Law c. Ohm’s Law d. Kirchoff’s rule.

Last Answer : c. Ohm’s Law

The phenomenon of producing emf in the coil due to change of current in the coil itself is called: a. mutual induction b. self-induction c. self-inductance d. mutual inductance

Description : The phenomenon of producing emf in the coil due to change of current in the coil itself is called: a. mutual induction b. self-induction c. self-inductance d. mutual inductance

Last Answer : d. mutual inductance

The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux

Description : The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux

Last Answer : d. constant magnetic flux

Which of the following quantities change when a proton moves at right angles to a magnetic field? a) Momentum b) Energy c) Speed d) All of these

Description : Which of the following quantities change when a proton moves at right angles to a magnetic field? a) Momentum b) Energy c) Speed d) All of these

Last Answer : a) Momentum

___________ is not affected by a magnetic field a) Change in magnetic flux b) a moving electron c) a stationary proton d) current flowing in a conductor

Description : ___________ is not affected by a magnetic field a) Change in magnetic flux b) a moving electron c) a stationary proton d) current flowing in a conductor

Last Answer : c) a stationary proton

The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Description : The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Last Answer : a. temperature coefficient of resistance

When a bar is subjected to a change of temperature and its longitudinal deformation is prevented, the stress induced in the bar is (a) Tensile (b) Compressive (c) Shear (d) Temperature

Description : When a bar is subjected to a change of temperature and its longitudinal deformation is prevented, the stress induced in the bar is (a) Tensile (b) Compressive (c) Shear (d) Temperature

Last Answer : (d) Temperature

What property of a metal describes the onset of plastic deformation in a tensile test? w) tensile strength x) elongation y) yield strength z) reduction in area

Description : What property of a metal describes the onset of plastic deformation in a tensile test? w) tensile strength x) elongation y) yield strength z) reduction in area

Last Answer : ANSWER: Y -- YIELD STRENGTH

-------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Description : -------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Last Answer : c.Translation

A body weighing 500 kg falls 8 cm and strikes a 500 kg/cm spring. The deformation of the spring will be a.?8 cm b.8 cm c.4 cm d.20.5 cm e.2 cm

Description : A body weighing 500 kg falls 8 cm and strikes a 500 kg/cm spring. The deformation of the spring will be a.?8 cm b.8 cm c.4 cm d.20.5 cm e.2 cm

Last Answer : c. 4 cm

The cause for the Tsunami, as deduced by the seismologists, is – (1) Gravitational pull of the moon (2) Low pressure trough in the ocean (3) Deformation of sea floor and vertical displacement of water (4) Sudden change in the monsoon wind

Description : The cause for the Tsunami, as deduced by the seismologists, is – (1) Gravitational pull of the moon (2) Low pressure trough in the ocean (3) Deformation of sea floor and vertical displacement of water (4) Sudden change in the monsoon wind

Last Answer : (3) Deformation of sea floor and vertical displacement of water Explanation: Earthquakes, volcanic eruptions and other underwater explosions (including detonations of underwater nuclear devices), landslides, ... the sea, the water above the deformed area is displaced from its equilibrium position.

A fluid whose viscosity does not change with the rate of deformation or shear strain is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid

Description : A fluid whose viscosity does not change with the rate of deformation or shear strain is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid

Last Answer : Answer: Option C

The cause for the Tsunami, as deduced by the seismologists, is (1) gravitational pull of the moon (2) low pressure trough in the ocean (3) deformation of sea floor and vertical displacement of water (4) sudden change in the monsoon wind

Description : The cause for the Tsunami, as deduced by the seismologists, is (1) gravitational pull of the moon (2) low pressure trough in the ocean (3) deformation of sea floor and vertical displacement of water (4) sudden change in the monsoon wind 

Last Answer : deformation of sea floor and vertical displacement of water

A 0-10 mA PMMC ammeter reads 5mA in a circuit; its bottom control spring snaps out suddenly the meter will now read. a) 5mA b) 10mA c) 2.5mA d) 0

Description : A 0-10 mA PMMC ammeter reads 5mA in a circuit; its bottom control spring snaps out suddenly the meter will now read. a) 5mA b) 10mA c) 2.5mA d) 0

Last Answer : Ans: 0

The termdispersion describestheprocessof a.separatinglightinto its componentfrequencies b. reflecting light from a smooth surface c. the process by which light is absorbed by an uneven rough surface d. light scattering

Description : The termdispersion describestheprocessof a.separatinglightinto its componentfrequencies b. reflecting light from a smooth surface c. the process by which light is absorbed by an uneven rough surface d. light scattering

Last Answer : a.separatinglightinto its componentfrequencies

Top loadingissometimesusedwithan antenna in ordertoincrease its a. effective height b. bandwidth c. beamwidth d. input capacitance

Description : Top loadingissometimesusedwithan antenna in ordertoincrease its a. effective height b. bandwidth c. beamwidth d. input capacitance

Last Answer : a. effective height

If electron has to be confined in the nucleus, its speed would have to be greater than a) 1010 cm/s b) 1010 m/s c) 1020 m/s d) 1020 cm/s

Description : If electron has to be confined in the nucleus, its speed would have to be greater than a) 1010 cm/s b) 1010 m/s c) 1020 m/s d) 1020 cm/s

Last Answer : b) 1010 m/s

The gas which was identified in the Sun using spectroscopy before its discovery on earth, is a) oxygen b) hydrogen c) helium d) nitrogen

Description : The gas which was identified in the Sun using spectroscopy before its discovery on earth, is a) oxygen b) hydrogen c) helium d) nitrogen

Last Answer : c) helium

If a material object moves with the speed of light ‘c’ its mass becomes a) equal to its rest mass b) Four times of its rest mass c) Double of its rest mass d) Infinite

Description : If a material object moves with the speed of light ‘c’ its mass becomes a) equal to its rest mass b) Four times of its rest mass c) Double of its rest mass d) Infinite

Last Answer : d) Infinite

With increase in the velocity of an object its mass will a) Increase b) Decrease c) Remain constant d) None of the above

Description : With increase in the velocity of an object its mass will a) Increase b) Decrease c) Remain constant d) None of the above

Last Answer : a) Increase