A body will behave as an “ideal black body” when it acts as: a) A perfect absorber b) A perfect radiator c) A body to have absorption power equal to one d) All of the above

A body will behave as an “ideal black body” when it acts as:
a) A perfect absorber b) A perfect radiator
c) A body to have absorption power equal to one d) All of the above
by

1 Answer

Answer :

d) All of the above
by

Related questions

. A perfect black body is a perfect __________ of radiation. (A) Absorber (B) Emitter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : . A perfect black body is a perfect __________ of radiation. (A) Absorber (B) Emitter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

What is considered as a perfect absorber as well as a perfect emitter?  A. Gray body  B. Black body  C. Real body  D. White body

Description : What is considered as a perfect absorber as well as a perfect emitter?  A. Gray body  B. Black body  C. Real body  D. White body

Last Answer : Black body

The earth is a – (1) good reflector of heat (2) non-absorber of heat (3) good absorber and good radiator of heat (4) bad absorber and bad radiator of heat

Description : The earth is a – (1) good reflector of heat (2) non-absorber of heat (3) good absorber and good radiator of heat (4) bad absorber and bad radiator of heat

Last Answer : (3) good absorber and good radiator of heat Explanation: The earth's surface radiates as a black body, since it aborts and radiates with nearly 100 percent efficiency for its temperatures. Gases, on the contrary, are selective absorbers and radiators.

The earth is a (1) good reflector of heat (2) non-absorber of heat (3) good absorber and good radiator of heat (4) bad absorber and bad radiator of heat

Description : The earth is a (1) good reflector of heat (2) non-absorber of heat (3) good absorber and good radiator of heat (4) bad absorber and bad radiator of heat

Last Answer : Bad absorber and bad radaitor because all bad absorber are bad emitter. As well

The concept that particles can behave like waves was given by a) Compton b) De-Broglie c) G.P. Thomson d) Germer

Description : The concept that particles can behave like waves was given by a) Compton b) De-Broglie c) G.P. Thomson d) Germer

Last Answer : b) De-Broglie

Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Description : Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Last Answer : (b) Nearly equal to emitter current

The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Description : The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Last Answer : (a) Acts as a supplier of charge carriers

The absorption ofradiowaves bythe atmosphere depends on a. their frequency b. their distance from the transmitter c. the polarization of the waves d. the polarization of the atmosphere

Description : The absorption ofradiowaves bythe atmosphere depends on a. their frequency b. their distance from the transmitter c. the polarization of the waves d. the polarization of the atmosphere

Last Answer : a. their frequency

As electromagneticwavestravelinfree space, onlyone ofthefollowingcan happento them: a. absorption b. attenuation c. refraction d. reflection

Description : As electromagneticwavestravelinfree space, onlyone ofthefollowingcan happento them: a. absorption b. attenuation c. refraction d. reflection

Last Answer : b. attenuation

The incident photon absorbed by an atom in the ground state E1, thereby leaving the atom in the excited state E2 , is a) spontaneous absorption b) stimulated absorption c) induced absorption d) both b & c

Description : The incident photon absorbed by an atom in the ground state E1, thereby leaving the atom in the excited state E2 , is a) spontaneous absorption b) stimulated absorption c) induced absorption d) both b & c

Last Answer : d) both b & c

The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Description : The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Last Answer : c. acts to help guide the light in the core

Anungrounded antennanearthe ground a. acts as a single antenna of twice the height b. is unlikely to need a ground screen c. acts as anantennaarray d. must be horizontally polarized

Description : Anungrounded antennanearthe ground a. acts as a single antenna of twice the height b. is unlikely to need a ground screen c. acts as anantennaarray d. must be horizontally polarized

Last Answer : c. acts as anantennaarray

P-n junction when reversed biased acts as a (a) Capacitor (b) inductor (c) on switch (d) off switch

Description : P-n junction when reversed biased acts as a (a) Capacitor (b) inductor (c) on switch (d) off switch

Last Answer : d) off switch

A magnetic field acts on a charged particles so as to change its: a. speed b. energy c. direction of motion d. all of these

Description : A magnetic field acts on a charged particles so as to change its: a. speed b. energy c. direction of motion d. all of these

Last Answer : Only direction of motion will change ...it means velocity will change but speed same

Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Description : Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Last Answer : c. field service conditions

An ideal transformer always obeys the law of conservation of........: a. energy b. momentum c. charge d. Flux

Description : An ideal transformer always obeys the law of conservation of........: a. energy b. momentum c. charge d. Flux

Last Answer : b. momentum

Resistance of an ideal insulator is a. Infinite b. Zero c. Finite d. depends upon nature

Description : Resistance of an ideal insulator is a. Infinite b. Zero c. Finite d. depends upon nature

Last Answer : a. Infinite

Cooling water is required for following equipment in ammonia absorption plant (a) condenser (b) evaporator (c) condenser and absorber (d) condenser, absorber and separator (rectifier).

Description : Cooling water is required for following equipment in ammonia absorption plant (a) condenser (b) evaporator (c) condenser and absorber (d) condenser, absorber and separator (rectifier).

Last Answer : Ans: d

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Description : What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Last Answer : B. Helmholtz resonator

‘L/mG’ is the expression for (A) Absorption factor (B) Brinkman number (C) Slope of operating line in absorber (D) Slope of operating line in stripper

Description : ‘L/mG’ is the expression for (A) Absorption factor (B) Brinkman number (C) Slope of operating line in absorber (D) Slope of operating line in stripper

Last Answer : (A) Absorption factor

Desirable value of absorption factor in an absorber is (A) 1 (B) < 1 (C) > 1 (D) 0.5

Description : Desirable value of absorption factor in an absorber is (A) 1 (B) < 1 (C) > 1 (D) 0.5

Last Answer : (C) > 1

Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Description : Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Last Answer : (C) Decrease in equilibrium solubility

Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

An idealized perfect absorber and perfect emitter of radiation.  a. elastic material  b. transponder material  c. Teflon  d. blackbody

Description : An idealized perfect absorber and perfect emitter of radiation.  a. elastic material  b. transponder material  c. Teflon  d. blackbody

Last Answer : blackbody

Black body radiation spectrum is an example of a) band spectra b) continuous spectra c) discrete spectra d) atomic spectra

Description : Black body radiation spectrum is an example of a) band spectra b) continuous spectra c) discrete spectra d) atomic spectra

Last Answer : b) continuous spectra

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Description : Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Last Answer : b. 90W

Refer to the circuit below . The power consumed by the element E is equal

Description : الرجوع إلى الدائرة أدناه. الطاقة التي يستهلكها العنصر E متساوية.

Last Answer : The power consumed the element E is equal to the  : P = V x I = 6V x 1 A = 6 W

Power factor of an electrical circuit is equal to?

Description : Power factor of an electrical circuit is equal to?

Last Answer : Power factor of an electrical circuit is equal to R/Z, cosine of phase angle difference between current and voltage, kW/kVA.

To what conditions does a gas behave like an ideal gas?  a. low temperature and low pressure  b. low temperature and high pressure  c. high temperature and low pressure  d. high temperature and high pressure

Description : To what conditions does a gas behave like an ideal gas?  a. low temperature and low pressure  b. low temperature and high pressure  c. high temperature and low pressure  d. high temperature and high pressure

Last Answer : high temperature and low pressure

If two different gases have the same volume, temperature, and pressure and behave like ideal gases, they will also be identical in which one of the following ways? w) average molecular velocity x) total mass y) total molecular kinetic energy z) average momentum per molecule

Description : If two different gases have the same volume, temperature, and pressure and behave like ideal gases, they will also be identical in which one of the following ways? w) average molecular velocity x) total mass y) total molecular kinetic energy z) average momentum per molecule

Last Answer : ANSWER: Y -- TOTAL MOLECULAR KINETIC ENERGY

What force between molecules tends to cause most common gases to behave as non-ideal gases?

Description : What force between molecules tends to cause most common gases to behave as non-ideal gases? w) Van der Waals' force x) ionic bonding force y) gravitational force z) covalent bonding force

Last Answer : ANSWER: W -- VAN DER WAALS' FORCE

After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Description : After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Last Answer : There is a power link connection breaker between the main generator and the emergency generator. During black out, this breaker trips. The emergency generator starts and its breaker closes and feeds only ... , there is no paralleling between main and emergency generator. Ask E/O for more details.

Out at sea, if there is a black out during your watch, what action will you take?

Description : Out at sea, if there is a black out during your watch, what action will you take?

Last Answer : Ask your C/E, 2/E or 4/E as they will give you the best answer based on Univan company policy.

In a thyristor Latching current is ________ than Holding current a) Equal b) Less c) Greater d) None

Description : In a thyristor Latching current is ________ than Holding current a) Equal b) Less c) Greater d) None

Last Answer : Ans: Greater

Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Description : Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Last Answer : (c) slightly more than unity

The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Description : The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Last Answer : (b) proportional to X

Electron can exist in the atom but outside the nucleus because a) speed of electron is equal to the speed of light b) speed of electron is more than speed of light c) speed of electron is less than speed of light d) None of these

Description : Electron can exist in the atom but outside the nucleus because a) speed of electron is equal to the speed of light b) speed of electron is more than speed of light c) speed of electron is less than speed of light d) None of these

Last Answer : c) speed of electron is less than speed of light

For Hydrogen atom, the allowed stationary orbits are those whose orbital angular momentum is equal to an integral multiple of h i.e., mvr = a) nh/2π b) nh x 2π c) nh / 2λ d) nh / 2πλ

Description : For Hydrogen atom, the allowed stationary orbits are those whose orbital angular momentum is equal to an integral multiple of h i.e., mvr = a) nh/2π b) nh x 2π c) nh / 2λ d) nh / 2πλ

Last Answer : a) nh/2π

The product of uncertainties of two physical observables must be approximately equal to a)Coulomb’s constant K b) Rydberg’s constant R c)Planck’s constant d)All of the above

Description : The product of uncertainties of two physical observables must be approximately equal to a)Coulomb’s constant K b) Rydberg’s constant R c)Planck’s constant d)All of the above

Last Answer : c)Planck’s constant

If a material object moves with the speed of light ‘c’ its mass becomes a) equal to its rest mass b) Four times of its rest mass c) Double of its rest mass d) Infinite

Description : If a material object moves with the speed of light ‘c’ its mass becomes a) equal to its rest mass b) Four times of its rest mass c) Double of its rest mass d) Infinite

Last Answer : d) Infinite

The phenomena of pair production occurs only when the energy of incident photon is least equal a) 10.2 MeV b) 1.02 MeV c) 1.02 eV d) 0.102 MeV

Description : The phenomena of pair production occurs only when the energy of incident photon is least equal a) 10.2 MeV b) 1.02 MeV c) 1.02 eV d) 0.102 MeV

Last Answer : b) 1.02 MeV

A rod at rest appears to an observer just a mere point when he moves across it as speed, a) Equal to the speed of light b) Double the speed of light c) Three-fourth the speed of light d) None of the above

Description : A rod at rest appears to an observer just a mere point when he moves across it as speed, a) Equal to the speed of light b) Double the speed of light c) Three-fourth the speed of light d) None of the above

Last Answer : a) Equal to the speed of light

In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Description : In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Last Answer : b) Equal to DC value

In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Description : In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Last Answer : (c) greater than emitter current

One henry is equal to.......: a. VA/s b. Nm/A c. As/V d. Vs/A

Description : One henry is equal to.......: a. VA/s b. Nm/A c. As/V d. Vs/A

Last Answer : d. Vs/A

One henry is equal to: a. Vs-1 A b. NmA-1 c. V -1 s A d. V s A

Description : One henry is equal to: a. Vs-1 A b. NmA-1 c. V -1 s A d. V s A

Last Answer : d. V s A

A solenoid has n turns and length l. If length is reduced to l/2 and turns are doubled then magnetic field B produced by it becomes equal to a) 2B b) 4B c) 1/2 B d) None of these

Description : A solenoid has n turns and length l. If length is reduced to l/2 and turns are doubled then magnetic field B produced by it becomes equal to a) 2B b) 4B c) 1/2 B d) None of these

Last Answer : a) 2B