The maximum stress that a body can tolerate is called: a) UTS b) Permanent stress c) Elastic strength d) Plastic stress

The maximum stress that a body can tolerate is called:
a) UTS b) Permanent stress c) Elastic strength d) Plastic stress
by

1 Answer

Answer :

a) UTS
by

Related questions

When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Description : When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Last Answer : d) Plasticity

The work is stored in an inductor in form of.......: a. Elastic potential energy b. Kinetic energy c. Potential energy d. Gravitational potential energy

Description : The work is stored in an inductor in form of.......: a. Elastic potential energy b. Kinetic energy c. Potential energy d. Gravitational potential energy

Last Answer : b. Kinetic energy

The ability of a body to return to its original shape is called: a) Plasticity b) Elasticity c) Strain d) Stress

Description : The ability of a body to return to its original shape is called: a) Plasticity b) Elasticity c) Strain d) Stress

Last Answer : b) Elasticity

The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Description : The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Last Answer : c) Bulk Modulus

The deformation of a solid when stress is applied is called a) Strain b) Elasticity c) Rigidity d) Pressure

Description : The deformation of a solid when stress is applied is called a) Strain b) Elasticity c) Rigidity d) Pressure

Last Answer : a) Strain

The electric breakdown strength of insulating materials depends on

Description : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

Last Answer : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

The ratio of shear stress to shear strain is a) Shear modulus b)Young’s Modulus c) Bulk Modulus d)None of above

Description : The ratio of shear stress to shear strain is a) Shear modulus b)Young’s Modulus c) Bulk Modulus d)None of above

Last Answer : b)Young’s Modulus

The ratio of stress to strain i: a) Modulus of conductivity b) Modules of Elasticity c) Modulus of electricity d) Modulus of Viscosity

Description : The ratio of stress to strain i: a) Modulus of conductivity b) Modules of Elasticity c) Modulus of electricity d) Modulus of Viscosity

Last Answer : b) Modules of Elasticity

State maximum power transfer theorem.

Description : State maximum power transfer theorem. 

Last Answer : The maximum power transfer theorem states that the maximum amount of power will be delivered to the load resistance when the load resistance is equal to the Thevenin/ Norton resistance of the network supplying the power ... draws maximum power. Also find the value of the maximum power.

The emission of number of photo electrons depends upon a) The colour of the body b) The frequency of incident light c) The intensity of light d) All of the above

Description : The emission of number of photo electrons depends upon a) The colour of the body b) The frequency of incident light c) The intensity of light d) All of the above

Last Answer : c) The intensity of light

Black body radiations depends upon a) The shape and nature of the body b) The velocity of radiations and colour of the body c) The temperature of the body d) All of the above

Description : Black body radiations depends upon a) The shape and nature of the body b) The velocity of radiations and colour of the body c) The temperature of the body d) All of the above

Last Answer : c) The temperature of the body

Strength of a shaft a. Is equal to maximum shear stress in the shaft at the time of elastic failure b. Is equal to maximum shear stress in the shaft at the time of rupture c. Is equal to torsional rigidity d. Is ability to resist maximum twisting moment

Description : Strength of a shaft a. Is equal to maximum shear stress in the shaft at the time of elastic failure b. Is equal to maximum shear stress in the shaft at the time of rupture c. Is equal to torsional rigidity d. Is ability to resist maximum twisting moment

Last Answer : d. Is ability to resist maximum twisting moment

Which of the following are true about plasticity? a) Permanent Deformation b) Ability to retain deformation under load or after removal of load c) Plastic deformation is greater than elastic deformation d) All of the mentioned

Description : Which of the following are true about plasticity? a) Permanent Deformation b) Ability to retain deformation under load or after removal of load c) Plastic deformation is greater than elastic deformation d) All of the mentioned

Last Answer : d) All of the mentioned

A combination of N-type and P-type material is called a) Diode b) Transistor c) Resistor d) Capacitor

Description : A combination of N-type and P-type material is called a) Diode b) Transistor c) Resistor d) Capacitor

Last Answer : a) Diode

Reciprocal of resistivity is called a. Resistance b. Inductance c. Conductivity d. Flexibility

Description : Reciprocal of resistivity is called a. Resistance b. Inductance c. Conductivity d. Flexibility

Last Answer : c. Conductivity

The ability of materials to become polarized under an applied electric field is called _______

Description : The ability of materials to become polarized under an applied electric field is called _______ A) Ferroelectricity B) Paraelectricity C) Polectricity D) None of these

Last Answer : The ability of materials to become polarized under an applied electric field is called Paraelectricity

Electric pressure is also called?

Description : Electric pressure is also called?

Last Answer : Electric pressure is also called voltage.

An electric motor in which both stator field and rotor rotates with same speed is called?

Description : An electric motor in which both stator field and rotor rotates with same speed is called?

Last Answer : An electric motor in which both stator field and rotor rotates with same speed is called synchronous motor.

The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Description : The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Last Answer : (D) Yielding point

The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Description : The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Last Answer : (c) Yield point

Compressor wizards, share your wisdom?

Description : Compressor wizards, share your wisdom?

Last Answer : There is this chap that bought a small compressor for electronics dusting purposes and compared it to a normal blower style duster. The compressor was a complete failure.

How would you handle UPS packages with this setup?

Description : How would you handle UPS packages with this setup?

Last Answer : Pick them up from the depot…

Q-12 which Testing is used in high thickness job in LNT?

Description : Q-12 which Testing is used in high thickness job in LNT?

Last Answer : Ultrasonic Testing.

Q-11 What is the purpose of dust free zone in LNT?

Description : Q-11 What is the purpose of dust free zone in LNT?

Last Answer : Special dust-free enclosures with temperature and humidity control enable the Company to achieve manufacturing excellence in Class 1 nuclear island components. L&T manufactures reactor vessels, steam ... and Heat Exchangers are manufactured within dust-free enclosures at L&T's workshops.

Q-10 In TANDEM SAW process, why AC and DC both currents are used?

Description : Q-10 In TANDEM SAW process, why AC and DC both currents are used?

Last Answer : AC will melt the base metal and make weld pool in the base metal and by DC it will fill the weld metal in the weld pool.

Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Description : Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Last Answer : In TANDEM SAW process there are more than one electrode is used. But for first electrode alternative current and for second electrode direct current shall be used.

Q-8 which types of SAW process are used in Larsen and Toubro?

Description : Q-8 which types of SAW process are used in Larsen and Toubro?

Last Answer : Tandem SAW Narrow groove application As the section thickness of vessel for nuclear and petroleum industry increase, the desire for reduced weld time and material consumption has driven the joint on ... process is carried out. LNT practice that for many of high thickness nuclear pressure vessel.

Q-7 during welding process, why sinusoidal wave form is converted in to the square wave form?

Description : Q-7 during welding process, why sinusoidal wave form is converted in to the square wave form?

Last Answer : In sinusoidal wave, we get maximum energy at one point only. So for the more amount of maximum energy we can get by converting the sinusoidal wave form in to the square wave form, and more penetration and deposition rate is achieved due to maximum energy.

Q-6 which innovative welding technique is used by L & T in T joint welding?

Description : Q-6 which innovative welding technique is used by L & T in T joint welding?

Last Answer : In T joint welding backing is required in other side while welding on one side. Flux goes on another side from the root opening and that has to be removed before welding other side. During the ... of the job is also not required by other sources since one side of welding serve the purpose.

Q-5 what is the phenomena behind the overhead welding?

Description : Q-5 what is the phenomena behind the overhead welding?

Last Answer : In overhead welding during welding flux has more fluidity and comes on the surface when the metal is deposited in the root gape. There are different freezing point metal and the flux. so metal have low ... deposit in the root gape and flux have a high freezing point so its deposit on the metal .

Q -4 what is the purpose of sodium, silicon and potassium in core element?

Description : Q -4 what is the purpose of sodium, silicon and potassium in core element?

Last Answer : • Silicon - deoxidize & form slag • Sodium - stabilize arc & form slag • Potassium - stabilizes the arc & form slag

Q-3 Write the energy distribution for different polarity?

Description : Q-3 Write the energy distribution for different polarity?

Last Answer : DCEP – 67% at electrode and 33% at job. • DCEN – 33 % at electrode and 67% at job. • AC – 50 % at electrode and 50% job.

Q-2 what are the functions of electrode covering in SMAW process?

Description : Q-2 what are the functions of electrode covering in SMAW process?

Last Answer : To facilitate arc ignition and give arc stability. To generate gas for shielding the arc & molten metal from air contamination. To de-oxidise the weld metal and flux impurities into the slag. To ... to support the molten weld metal). To control hydrogen contents in the weld. (basic type)

Q-1 what is the function of copper coating in SAW filler wire?

Description : Q-1 what is the function of copper coating in SAW filler wire?

Last Answer : to assure a good electric contact between wire and contact tip • to assure a smooth feed of the wire through the guide tube, feed rolls and contact tip (decrease contact tube wear) • to provide protection against corrosion

at the terminal of a three-phase 6.6Kv alternator a load R=200 ohm is connected between two-phase and the third phase is opened. Z1=z2=5 ohm Zo=2 find out the fault current .

Description : at the terminal of a three-phase 6.6Kv alternator a load R=200 ohm is connected between two-phase and the third phase is opened. Z1=z2=5 ohm Zo=2 find out the fault current .

Last Answer : 32A

The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Description : The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Last Answer : (b) Both are zero

Photo diode operates in the _______ condition (a) Forward bias (b) null (c) both a & d (d) reverse bias

Description : Photo diode operates in the _______ condition (a) Forward bias (b) null (c) both a & d (d) reverse bias

Last Answer : (d) reverse bias

In the N-type semiconductor the charge carries are a) Holes b) Neutrons c) Protons d) Electrons

Description : In the N-type semiconductor the charge carries are a) Holes b) Neutrons c) Protons d) Electrons

Last Answer : d) Electrons

In a P-type semiconductor the charge carriers are a) Electrons b) Holes c) Protons d) Neutrons

Description : In a P-type semiconductor the charge carriers are a) Electrons b) Holes c) Protons d) Neutrons

Last Answer : b) Holes

Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Description : Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Last Answer : b) Polymer

Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c ⁄BAN d) Decreasing the area of the coil

Description : Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c ⁄BAN d) Decreasing the area of the coil

Last Answer : a) Increasing the number of turns of the coil

Electrical energy is measured in a. watt b. horse power c. kilo watt d. kilowatt hour

Description : Electrical energy is measured in a. watt b. horse power c. kilo watt d. kilowatt hour

Last Answer : d. kilowatt hour

Resistance of a super conductor is a. Finite b. Infinite c. Zero d. changes with every conductor

Description : Resistance of a super conductor is a. Finite b. Infinite c. Zero d. changes with every conductor

Last Answer : c. Zero

How much heat does a 40 W bulb generates in one hour? a. 144000J b. 144J c. 1.44J d. 14J

Description : How much heat does a 40 W bulb generates in one hour? a. 144000J b. 144J c. 1.44J d. 14J

Last Answer : a. 144000J

One kilowatt hour is the amount of energy delivered during a. one second b. one day c. one minute d. one hour

Description : One kilowatt hour is the amount of energy delivered during a. one second b. one day c. one minute d. one hour

Last Answer : b. one day

When same current passes for same time through a th ick and thin wire a. more heat is produced in thick wire b. more heat is produced in thin wire c. no heat is produced in wire d. less heat is produced in thick wire

Description : When same current passes for same time through a th ick and thin wire a. more heat is produced in thick wire b. more heat is produced in thin wire c. no heat is produced in wire d. less heat is produced in thick wire

Last Answer : More heat is produced in thin wire. Reason:The resistance of a thin wire is greater than the resistance of a thick wire because a thin wire has fewer electrons to carry the current. And higher resistance produces more heat therefore thin wire overheats.

Resistance of a conductor depends upon a. nature of conductor b. dimension of conductor c. physical state of the conductor d. all of above

Description : Resistance of a conductor depends upon a. nature of conductor b. dimension of conductor c. physical state of the conductor d. all of above

Last Answer : d. all of above

The current through a metallic conductor is due to the motion of a. free electrons b. Protons c. Neutrons d. still under controversy

Description : The current through a metallic conductor is due to the motion of a. free electrons b. Protons c. Neutrons d. still under controversy

Last Answer : a. free electrons

Selenium is: (a) Conductor (b) Insulator in the dark are becomes conductor when exposed to light (c) An insulator (d) None of these

Description : Selenium is: (a) Conductor (b) Insulator in the dark are becomes conductor when exposed to light (c) An insulator (d) None of these

Last Answer : (b) Insulator in the dark are becomes conductor when exposed to light

An example of photoconductor is: (a) Iron (b) Aluminum (c) Carbon (d) Selenium

Description : An example of photoconductor is: (a) Iron (b) Aluminum (c) Carbon (d) Selenium

Last Answer : (d) Selenium