Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c ⁄BAN d) Decreasing the area of the coil

Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c  ⁄BAN d) Decreasing the area of the coil
by

1 Answer

Answer :

a) Increasing the number of turns of the coil
by

Related questions

The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a magnetic field of `5xx10^(-2)` Wb `m^(-2)`. If

Description : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a magnetic field of `5xx10^(-2)` Wb `m^(-2)`. If

Last Answer : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a ... D. current sensitivity is `40 deg` `A^(-1)`

The sensitivity of a bubble tube can be increased by (A) Increasing the diameter of the tube (B) Decreasing the length of bubble (C) Increasing the viscosity of liquid (D) Decreasing the radius of curvature of tube

Description : The sensitivity of a bubble tube can be increased by (A) Increasing the diameter of the tube (B) Decreasing the length of bubble (C) Increasing the viscosity of liquid (D) Decreasing the radius of curvature of tube

Last Answer : (A) Increasing the diameter of the tube

Assertion current sensitivity of a galvanometer is directley proportionall to the current through the coil. Reason Voltage sensitivity is inversely pr

Description : Assertion current sensitivity of a galvanometer is directley proportionall to the current through the coil. Reason Voltage sensitivity is inversely pr

Last Answer : Assertion current sensitivity of a galvanometer is directley proportionall to the current ... sensitivity is inversely proportional to voltage.

In order to increase the sensitivity of a moving coil galvanometer, one should decrease

Description : In order to increase the sensitivity of a moving coil galvanometer, one should decrease

Last Answer : In order to increase the sensitivity of a moving coil galvanometer, one should decrease A. the strength of ... in its coil D. the area of its coil

A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage sensitivity is 2 divisions per

Description : A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage sensitivity is 2 divisions per

Last Answer : A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage ... `10^(3)` D. `10^(5)`

How can a magnetic field be used to generate an electric current?

Description : How can a magnetic field be used to generate an electric current?

Last Answer : Magnetic  field  can  be  used  to  generate  electric  current  on  a  condition  that  it  is  on  a  rate  of  changing  magnetic  flux.  (Faraday's  law)

The pole faces of U-shaped magnet in a moving coil galvanometer are made concave to a) decrease the strength of magnetic field b) create a non-uniform magnetic field c) make the magnetic field radial d) All of these

Description : The pole faces of U-shaped magnet in a moving coil galvanometer are made concave to a) decrease the strength of magnetic field b) create a non-uniform magnetic field c) make the magnetic field radial d) All of these

Last Answer : c) make the magnetic field radial

Choose the correct order of electric discharge lamps in their increasing order of efficiencies (lumens/watt) :

Description : Choose the correct order of electric discharge lamps in their increasing order of efficiencies (lumens/watt) :  (A) Sodium vapour lamp, Mercury vapour lamp, Neon lamp  (B) Neon lamp, Sodium vapour ... Mercury vapour lamp, Sodium vapour lamp  (D) Mercury vapour lamp, Sodium vapour lamp, Neon lamp

Last Answer : Choose the correct order of electric discharge lamps in their increasing order of efficiencies (lumens/watt) :  (A) Sodium vapour lamp, Mercury vapour lamp, Neon lamp  (B) Neon lamp, Sodium ... Mercury vapour lamp, Sodium vapour lamp  (D) Mercury vapour lamp, Sodium vapour lamp, Neon lamp

When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Description : When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Last Answer : d) Plasticity

A coil of wire is placed in a changing magnetic field. If the number of turns in the coil is decreased, the...

Description : A coil of wire is placed in a changing magnetic field. If the number of turns in the coil is decreased, the voltage induced across the coil will: A. increase B. decrease C. remain constant D. be excessive

Last Answer : A coil of wire is placed in a changing magnetic field. If the number of turns in the coil is decreased, the voltage induced across the coil will: decrease

Compare electric and magnetic circuit.

Description : Compare electric and magnetic circuit.

Last Answer : Comparison between Magnetic and Electric Circuits

A planar coil having 12 turns carries 15 A current. The coil is oriented with respect to the uniform magnetic field `B= 0.2hati T` such that its direc

Description : A planar coil having 12 turns carries 15 A current. The coil is oriented with respect to the uniform magnetic field `B= 0.2hati T` such that its direc

Last Answer : A planar coil having 12 turns carries 15 A current. The coil is oriented with respect to the ... energy of the coil in the given orientation is

A square coil of edge I having n turns carries a curent i. it is kept on a smooth horizontal plate. A uniform magnetic field B exists in a direction p

Description : A square coil of edge I having n turns carries a curent i. it is kept on a smooth horizontal plate. A uniform magnetic field B exists in a direction p

Last Answer : A square coil of edge I having n turns carries a curent i. it is kept on a smooth horizontal plate. A uniform ... . `(Mg)/(4niL)` D. `(2Mg)/(niL)`

A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Description : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Last Answer : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^( ... N-m` tending to rotate the side AD into of the page

A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic field set up at the centre of the coil is

Description : A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic field set up at the centre of the coil is

Last Answer : A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic ... C. `4pixx10^(-5)T` D. `2pixx10^(-5)T`

The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a ...

Description : The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a rate of 8 Wb/s is A. 1,000 V B. 2,000 V C.31.25 V D. 3,125 V

Last Answer : The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a rate of 8 Wb/s is 2,000 V 

The ability of materials to become polarized under an applied electric field is called _______

Description : The ability of materials to become polarized under an applied electric field is called _______ A) Ferroelectricity B) Paraelectricity C) Polectricity D) None of these

Last Answer : The ability of materials to become polarized under an applied electric field is called Paraelectricity

The electric field inside a hollow conducting sphere ________

Description : The electric field inside a hollow conducting sphere ________ A) Depends on the diameter of the sphere  B) Varies according to the direction of earth’s magnetic poles C) Is zero  D) None of these

Last Answer : The electric field inside a hollow conducting sphere Is zero

MOSFET uses the electric field of?

Description : MOSFET uses the electric field of?

Last Answer : MOSFET uses the electric field of gate capacitance.

An electric motor in which both stator field and rotor rotates with same speed is called?

Description : An electric motor in which both stator field and rotor rotates with same speed is called?

Last Answer : An electric motor in which both stator field and rotor rotates with same speed is called synchronous motor.

Is electric potential zero when electric field is zero?

Description : Is electric potential zero when electric field is zero?

Last Answer : Yes  .If  electric  field  is  zero  then  electric  potential  is  zero  ,  not  even  one.

What is the direction of the induced electric field?

Description : What is the direction of the induced electric field?

Last Answer : It  is  in  opposite  direction   to  the  one  that   produced  it.

Can the electric field between two positive charges be zero?

Description : Can the electric field between two positive charges be zero?

Last Answer : It  can  only  if  they  have  equal  charges.

What is the direction of the electric field?

Description : What is the direction of the electric field?

Last Answer : Electric   field    is  at   right angle   widh  flow  of  current  (right  hand   rule).

The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Description : The ratio of stress to volumetric strain is called a) Shear Modulus b) Young’s Modulus c) Bulk Modulus d) Modulus of elasticity

Last Answer : c) Bulk Modulus

The ratio of shear stress to shear strain is a) Shear modulus b)Young’s Modulus c) Bulk Modulus d)None of above

Description : The ratio of shear stress to shear strain is a) Shear modulus b)Young’s Modulus c) Bulk Modulus d)None of above

Last Answer : b)Young’s Modulus

The ratio of stress to strain i: a) Modulus of conductivity b) Modules of Elasticity c) Modulus of electricity d) Modulus of Viscosity

Description : The ratio of stress to strain i: a) Modulus of conductivity b) Modules of Elasticity c) Modulus of electricity d) Modulus of Viscosity

Last Answer : b) Modules of Elasticity

Specific energy consumption of an electric train is the ratio between

Description : Specific energy consumption of an electric train is the ratio between (A) Specific energy output at driving wheels and efficiency of the traction motor (B) Specific energy output at driving wheels ... (D) Specific energy output at driving wheels and efficiency of the (motor + transmission gear)

Last Answer : Specific energy consumption of an electric train is the ratio between Specific energy output at driving wheels and efficiency of the (motor + transmission gear)

Aboard ship, a grounded field coil in an AC motor can be determined by using a _________________. A. portable growler B. galvanometer C. visual inspection D. megohmmeter

Description : Aboard ship, a grounded field coil in an AC motor can be determined by using a _________________. A. portable growler B. galvanometer C. visual inspection D. megohmmeter

Last Answer : Answer: D

E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Description : E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Last Answer : all of above

Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : (1) pressure on the sand is decreased by increasing the area of the surface in contact Explanation: Camels have broad, flat, leathery pads with two toes on each foot. When the camel places its foot on ... the animal on loose sand in much the same way that a snowshoe helps a person walk on snow.

The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Description : The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Last Answer : (D) Increasing the concentration of copper sulphate solution

Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : pressure on the sand is decreased by increasing the area of the surface in contact

The induced current can be increased by: a. Using strong magnetic field b. moving loop faster c. Replacing loop by coil d. all of above

Description : The induced current can be increased by: a. Using strong magnetic field b. moving loop faster c. Replacing loop by coil d. all of above

Last Answer : d. all of above

An analog voltmeter has a sensitivity of 10kΩ/volt. The galvanometer used in constructing the instrument

Description : An analog voltmeter has a sensitivity of 10kΩ/volt. The galvanometer used in constructing the instrument will produce a full scale deflection when the current passed through it is  (a) 10 mA (b) 20 mA (c) 50 mA (d) 100 μA

Last Answer : An analog voltmeter has a sensitivity of 10kΩ/volt. The galvanometer used in constructing the instrument will produce a full scale deflection when the current passed through it is 100 μA

If we increase the current sensitivity of a galvanometer the voltage sensitivity will

Last Answer : If we increase the current sensitivity of a galvanometer the voltage sensitivity will Decrease.

A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities

Description : A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities remaining the same, the inductance will be:

Last Answer : A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities remaining the same, the inductance will be: 24 mH

The frequency of an alternator at a given RPM is determined by the _____________. A. number of turns of wire in the armature coil B. number of magnetic poles C. strength of the magnets used D. output voltage

Description : The frequency of an alternator at a given RPM is determined by the _____________. A. number of turns of wire in the armature coil B. number of magnetic poles C. strength of the magnets used D. output voltage

Last Answer : Answer: B

One factor that determines the frequency of an alternator is the ____________. A. number of turns of wire in the armature coil B. number of magnetic poles C. strength of the magnets used D. output voltage

Description : One factor that determines the frequency of an alternator is the ____________. A. number of turns of wire in the armature coil B. number of magnetic poles C. strength of the magnets used D. output voltage

Last Answer : Answer: B

The emission of number of photo electrons depends upon a) The colour of the body b) The frequency of incident light c) The intensity of light d) All of the above

Description : The emission of number of photo electrons depends upon a) The colour of the body b) The frequency of incident light c) The intensity of light d) All of the above

Last Answer : c) The intensity of light

A circular coil of radius `10 cm "and" 100` turns carries a current 1A. What is the magnetic moment of the coil?

Description : A circular coil of radius `10 cm "and" 100` turns carries a current 1A. What is the magnetic moment of the coil?

Last Answer : A circular coil of radius `10 cm "and" 100` turns carries a current 1A. What is the magnetic moment of the coil? A. ... 3,142 A-m^(2)` D. `3 A-m^(2)`

Keeping other parameters constant brake power of diesel engine can be increased by (a) Decreasing the density of intake air (b) Increasing the temperature of intake air (c) Increasing the pressure of intake air (d) Decreasing the pressure of intake air

Description : Keeping other parameters constant brake power of diesel engine can be increased by (a) Decreasing the density of intake air (b) Increasing the temperature of intake air (c) Increasing the pressure of intake air (d) Decreasing the pressure of intake air

Last Answer : Ans : c

If people's income of a country is denoted in a curved line space that it has increased, then what does it denote? (1) the income is increasing (2) the income is decreasing (3) dissimilarity is decreasing in income distribution (4) dissimilarity in income distribution is increasing

Description : If people's income of a country is denoted in a curved line space that it has increased, then what does it denote? (1) the income is increasing (2) the income is decreasing (3) dissimilarity is decreasing in income distribution (4) dissimilarity in income distribution is increasing

Last Answer : (3) dissimilarity is decreasing in income distribution Explanation: It shows inequality in income distribution. Inequality indices can also be derived directly from the Lorenz curve. Perhaps the most commonly- ... by the Lorenz curve and the perfect equality line to the total area below that line.

The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient(B) Increasing the liquid film co-efficient(C) Increasing the total pressure(D) Decreasing the total pressure

Description : The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient (B) Increasing the liquid film co-efficient (C) Increasing the total pressure (D) Decreasing the total pressure

Last Answer : (A) Increasing the gas film co-efficient

Magnifying power of a simple microscope can be increased by ? A. increasing focal length of the lens B. Decreasing focal length of the lens (Answer) C. Lens of large aperture D. lens of short aperture E. None of these

Description : Magnifying power of a simple microscope can be increased by ? A. increasing focal length of the lens B. Decreasing focal length of the lens (Answer) C. Lens of large aperture D. lens of short aperture E. None of these

Last Answer : B. Decreasing focal length of the lens (Answer)

The shock absorbing capacity of bolts can be increased by a) Increasing the shank diameter b) Decreasing the length of shank portion of bolt c) Increase the shank diameter and decreasing the length of shank d) None of the listed

Description : The shock absorbing capacity of bolts can be increased by a) Increasing the shank diameter b) Decreasing the length of shank portion of bolt c) Increase the shank diameter and decreasing the length of shank d) None of the listed

Last Answer : d) None of the listed

The shock absorbing capacity of a bolt can be increased by (A) Increasing stress in shank (B) Increasing stress in core diameter of threads (C) Decreasing stress in shank (D) Decreasing stress in core diameter of threads

Description : The shock absorbing capacity of a bolt can be increased by (A) Increasing stress in shank (B) Increasing stress in core diameter of threads (C) Decreasing stress in shank (D) Decreasing stress in core diameter of threads

Last Answer : (A) Increasing stress in shank

The range of a particular Rotameter can be increased by (A) Use of floats of different densities (B) No means (C) Increasing the diameter of the float (D) Decreasing the diameter of the float

Description : The range of a particular Rotameter can be increased by (A) Use of floats of different densities (B) No means (C) Increasing the diameter of the float (D) Decreasing the diameter of the float

Last Answer : (A) Use of floats of different densities

The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Description : The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Last Answer : ans d

The seed rate can be increased by a) Decreasing the exposure length b) Increasing the exposure length c) Increasing speed d) Decreasing speed Ans. b

Description : The seed rate can be increased by a) Decreasing the exposure length b) Increasing the exposure length c) Increasing speed d) Decreasing speed Ans. b

Last Answer : ans b