The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

The stress at which extension of a material takes place more quickly as compared to the increase
in load, is called
(A) Elastic point
(B) Plastic point
(C) Breaking point
(D) Yielding point
by

1 Answer

Answer :

(D) Yielding point
by

Related questions

The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Description : The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Last Answer : (c) Yield point

The stress at which extension of the material takes place more rapidly as compared to the increase in load is termed as the __________ point of the material. (A) Elastic (B) Ultimate (C) Yielding (D) Breaking

Description : The stress at which extension of the material takes place more rapidly as compared to the increase in load is termed as the __________ point of the material. (A) Elastic (B) Ultimate (C) Yielding (D) Breaking

Last Answer : (C) Yielding

The phenomenon of slow extension of materials having constant load, i.e. increasing with the time is called (A) Creeping (B) Yielding (C) Breaking (D) None of these

Description : The phenomenon of slow extension of materials having constant load, i.e. increasing with the time  is called  (A) Creeping  (B) Yielding  (C) Breaking  (D) None of these 

Last Answer : (A) Creeping 

A material no longer behaves elastically beyond (A) Plastic limit (B) Limiting load (C) Elastic limit (D) Breaking load

Description : A material no longer behaves elastically beyond (A) Plastic limit (B) Limiting load (C) Elastic limit (D) Breaking load

Last Answer : (C) Elastic limit

The phenomenon of slow growth of strain under a steady tensile stress, is called (A) Yielding (B) Creeping (C) Breaking (D) None of these

Description : The phenomenon of slow growth of strain under a steady tensile stress, is called (A) Yielding (B) Creeping (C) Breaking (D) None of these

Last Answer : (B) Creeping

The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Description : The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Last Answer : Ductile

At yield point of a test piece, the material (A) Obeys Hooke's law (B) Behaves in an elastic manner (C) Regains its original shape on removal of the load(D) Undergoes plastic deformation

Description : At yield point of a test piece, the material  (A) Obeys Hooke's law  (B) Behaves in an elastic manner  (C) Regains its original shape on removal of the load  (D) Undergoes plastic deformation 

Last Answer : (D) Undergoes plastic deformation 

Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Last Answer : [ B ] Plastic deformations in the slab are negligible

At ‘yield point’ of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become plastic C. even the plastic stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Description : At yield point' of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become ... stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Last Answer : the load has already exceeded the elastic limit and the material has become plastic

Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco-elastic material, stress-strain relation is dependent on time (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Description : Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco ... (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Last Answer : (D) All the above

Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Description : Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Last Answer : (C) Limit of proportionality

Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) The damping capacity of a material is due to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Last Answer : Option B

Maximum principal stress theory for the failure of a material at elastic point, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Von Mises' theory

Description : Maximum principal stress theory for the failure of a material at elastic point, is known  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Von Mises' theory

Last Answer : (C) Rankine's theory 

The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Description : The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Last Answer : (b) Proportional Limit

A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Description : A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Last Answer : (A) Plastic

According to maximum shear stress failure criterion, yielding in material occurs, when the maximum shear stress is equal to __________ times the yield stress. (A) 0.5 (B) 2 (C) √2 (D) √3/2

Description : According to maximum shear stress failure criterion, yielding in material occurs, when the maximum shear stress is equal to __________ times the yield stress. (A) 0.5 (B) 2 (C) √2 (D) √3/2

Last Answer : (A) 0.5

The stress necessary to initiate yielding, is considerably (A) More than that necessary to continue it (B) Less than that necessary to continue it (C) More than that necessary to stop it (D) Less than that necessary to stop it

Description : The stress necessary to initiate yielding, is considerably  (A) More than that necessary to continue it  (B) Less than that necessary to continue it  (C) More than that necessary to stop it  (D) Less than that necessary to stop it

Last Answer : (A) More than that necessary to continue it 

Hooke's law states that A. the extension is proportional to the load when the elastic limit is not exceeded B. the extension is inversely proportional to the load when the elastic limit is not exceeded C. the extension is independent of the load when the elastic limit is not exceeded D. load is dependent on extension

Description : Hooke's law states that A. the extension is proportional to the load when the elastic limit is not exceeded B. the extension is inversely proportional to the load when the elastic limit is not ... is independent of the load when the elastic limit is not exceeded D. load is dependent on extension

Last Answer : the extension is proportional to the load when the elastic limit is not exceeded

The working stress method is also known as [ A ] Elastic method [ B ] Load factor method [ C ] Critical method [ D ] All the above

Description : The working stress method is also known as [ A ] Elastic method [ B ] Load factor method [ C ] Critical method [ D ] All the above

Last Answer : [ A ] Elastic method

All materials obey Hooke's law within elastic limit. When elastic limit is reached, the tensile strain (A) Increases very quickly (B) Decreases very quickly (C) Increases in proportion to stress (D) Decreases in proportion to stress

Description : All materials obey Hooke's law within elastic limit. When elastic limit is reached, the tensile strain (A) Increases very quickly (B) Decreases very quickly (C) Increases in proportion to stress (D) Decreases in proportion to stress

Last Answer : (A) Increases very quickly

The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point

Description : The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point

Last Answer : (b) Elastic limit

Rapture stress is (a) Breaking stress (b) Load at the braking point/A (c) Load at the breaking point/Neck area (d) Maximum Stress

Description : Rapture stress is (a) Breaking stress (b) Load at the braking point/A (c) Load at the breaking point/Neck area (d) Maximum Stress

Last Answer : (c) Load at the breaking point/Neck area

The ratio of shear stress and shear strain of an elastic material, is (A) Modulus of Rigidity (B) Shear Modulus (C) Modulus of Elasticity (D) Both (a) and (b)

Description : The ratio of shear stress and shear strain of an elastic material, is  (A) Modulus of Rigidity  (B) Shear Modulus  (C) Modulus of Elasticity  (D) Both (a) and (b) 

Last Answer : (D) Both (a) and (b) 

Maximum shear stress theory for the failure of a material at the elastic limit, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory

Description : Maximum shear stress theory for the failure of a material at the elastic limit, is known  (A) Guest's or Trecas' theory  (B) St. Venant's theory  (C) Rankine's theory  (D) Haig's theory

Last Answer : (A) Guest's or Trecas' theory

The maximum stress that a body can tolerate is called: a) UTS b) Permanent stress c) Elastic strength d) Plastic stress

Description : The maximum stress that a body can tolerate is called: a) UTS b) Permanent stress c) Elastic strength d) Plastic stress

Last Answer : a) UTS

The elastic stress strain behavior of rubber is A. Linear B. Nonlinear C. Plastic D. No fixed relationship

Description : The elastic stress strain behavior of rubber is A. Linear B. Nonlinear C. Plastic D. No fixed relationship

Last Answer : B. Nonlinear

A material is said to be perfectly elastic if (A) It regains its original shape on removal of the load (B) It regains its original shape partially on removal of the load (C) It does not regain its original shape at all (D) None of these

Description : A material is said to be perfectly elastic if  (A) It regains its original shape on removal of the load  (B) It regains its original shape partially on removal of the load  (C) It does not regain its original shape at all  (D) None of these

Last Answer : (A) It regains its original shape on removal of the load 

Consider the following statements: 1. Failure occurs beyond elastic limit 2. Rupture takes place immediately after elastic limit 3. Permanent set occurs beyond elastic limit Which of these are considered in the theories of failure? (a) 1, 2 and 3 (b) 1 and 3 only (c) 2 and 3 only d) 1 and 2 only

Description : Consider the following statements: 1. Failure occurs beyond elastic limit 2. Rupture takes place immediately after elastic limit 3. Permanent set occurs beyond elastic limit Which of these are considered in the theories of failure? (a) 1, 2 and 3 (b) 1 and 3 only (c) 2 and 3 only d) 1 and 2 only

Last Answer : d) 1 and 2 only

Fatigue limit improvement by over stressing the metal by successively increasing the load is called coaxing. In fatigue failure, the material fails (A) Below the yield point (B) Above the yield point (C) Below the elastic limit (D) At the elastic limit

Description : Fatigue limit improvement by over stressing the metal by successively increasing the load is called coaxing. In fatigue failure, the material fails (A) Below the yield point (B) Above the yield point (C) Below the elastic limit (D) At the elastic limit

Last Answer : Option A

Which of the following are true about plasticity? a) Permanent Deformation b) Ability to retain deformation under load or after removal of load c) Plastic deformation is greater than elastic deformation d) All of the mentioned

Description : Which of the following are true about plasticity? a) Permanent Deformation b) Ability to retain deformation under load or after removal of load c) Plastic deformation is greater than elastic deformation d) All of the mentioned

Last Answer : d) All of the mentioned

If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous

Description : If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous

Last Answer : (c) Isotropic

If yielding strength=400N/mm2, the find the permissible shear stress according to ASME standards. a) 72 N/mm2 b) 76 N/mm2 c) 268 N/mm2 d) 422 N/mm2

Description : If yielding strength=400N/mm2, the find the permissible shear stress according to ASME standards. a) 72 N/mm2 b) 76 N/mm2 c) 268 N/mm2 d) 422 N/mm2

Last Answer : a) 72 N/mm2

If yielding strength=400N/mm², the find the permissible shear stress according to ASME standards. a) 72 N/mm² b) 76 N/mm² c) 268 N/mm² d) 422 N/mm²

Description : If yielding strength=400N/mm², the find the permissible shear stress according to ASME standards. a) 72 N/mm² b) 76 N/mm² c) 268 N/mm² d) 422 N/mm²

Last Answer : a) 72 N/mm²

Which of the following is the most elastic material? (A) Plastic (B) Glass (C) Steel (D) Rubber

Description : Which of the following is the most elastic material? (A) Plastic (B) Glass (C) Steel (D) Rubber

Last Answer : (C) Steel

Hot & cold working of material causes its __________ deformation. (A) Visco-elastic (B) Isotropic (C) Elastic (D) Plastic

Description : Hot & cold working of material causes its __________ deformation. (A) Visco-elastic (B) Isotropic (C) Elastic (D) Plastic

Last Answer : (D) Plastic

Every material obeys the Hooke’s law within (a) Elastic limit (b) Plastic limit (c) Limit of proportionality (d) None of these

Description : Every material obeys the Hooke’s law within (a) Elastic limit (b) Plastic limit (c) Limit of proportionality (d) None of these

Last Answer : c) Limit of proportionality

A brittle material has (a) No elastic zone (b) No plastic zone (c) Large plastic zone (d) None of these

Description : A brittle material has (a) No elastic zone (b) No plastic zone (c) Large plastic zone (d) None of these

Last Answer : 2

Load testing emphasizes on performance under load while stress testing emphasizes on _______ A. Breaking load B. Performance under stress C. Performance under load D. There is no such difference, both are same

Description : Load testing emphasizes on performance under load while stress testing emphasizes on _______ A. Breaking load B. Performance under stress C. Performance under load D. There is no such difference, both are same

Last Answer : A. Breaking load

Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is proportional to D3(D = mean coil diameter) or d4(d = wire diameter) (C) Crushing load or columns is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2

Description : Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is ... is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2

Last Answer : (C) Crushing load or columns is less than the buckling load

For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Description : For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Last Answer : (B) Elastic structures

Cohesive soils are generally (A) Plastic and also compressible (B) Elastic and also compressible (C) Plastic but incompressible (D) None of these

Description : Cohesive soils are generally (A) Plastic and also compressible (B) Elastic and also compressible (C) Plastic but incompressible (D) None of these

Last Answer : (A) Plastic and also compressible

Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition

Description : Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition

Last Answer : (a) Equilibrium condition

Creep coefficient is the ratio of [ A ] Ultimate Creep strain to elastic strain [ B ] Elastic strain to ultimate Creep strain [ C ] Elastic strain to plastic strain [ D ] Plastic strain to elastic strain

Description : Creep coefficient is the ratio of [ A ] Ultimate Creep strain to elastic strain [ B ] Elastic strain to ultimate Creep strain [ C ] Elastic strain to plastic strain [ D ] Plastic strain to elastic strain

Last Answer : [ A ] Ultimate Creep strain to elastic strain

The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Description : The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Last Answer : (C) Requires more labour

The area under stress-strain curve represents a.Hardness of material b.Breaking strength of the material c.Energy required to cause failure d.Toughness of material e.Malleabbility of material

Description : The area under stress-strain curve represents a.Hardness of material b.Breaking strength of the material c.Energy required to cause failure d.Toughness of material e.Malleabbility of material

Last Answer : c. Energy required to cause failure

Is it true Elastic deformation occurs when a material deforms as stress is applied?

Description : Is it true Elastic deformation occurs when a material deforms as stress is applied?

Last Answer : Yes

What is the maximum value of deforming force upto which a material shows elastic property and above which the material loses it? (1) Elasticity (2) Strain (3) Elastic Limit (4) Stress

Description : What is the maximum value of deforming force upto which a material shows elastic property and above which the material loses it? (1) Elasticity (2) Strain (3) Elastic Limit (4) Stress

Last Answer : (3) Elastic Limit Explanation: The Maximum Extent to which a solid may be stretched without permanent alteration of size or shape.

What is the maximum value of deforming force up to which a material shows elastic property and above which the material loses it? (1) Elasticity (2) Strain (3) Elastic Limit (4) Stress

Description : What is the maximum value of deforming force up to which a material shows elastic property and above which the material loses it? (1) Elasticity (2) Strain (3) Elastic Limit (4) Stress

Last Answer : (4) Elastic Limit Explanation: The Maximum Extent to which a solid may be stretched without permanent alteration of size or shape.