Gigabit Ethernet has a datarate of________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Gigabit Ethernet has a datarate of________Mbps.
A)
10
B)
100
C)
1000
D)
10,000
by

1 Answer

Answer :

1000
by

Related questions

In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet

Description : In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet

Last Answer : Fast Ethernet

IEEE 802.3ab defines Gigabit Ethernet transmission over unshieldedtwisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Last Answer : a. 1000 BASE-T

Fast Ethernet hasa data rate of ________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Description : Fast Ethernet hasa data rate of ________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Last Answer : 100

………………….. is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbit/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Description : ………………….. is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbit/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Last Answer : B) Fast Ethernet

............ is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Description : ............ is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Last Answer : B) Fast Ethernet

is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Description : is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Last Answer : B) Fast Ethernet

Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Differentiate fast Ethernet and gigabit Ethernet.

Description : Differentiate fast Ethernet and gigabit Ethernet.

Last Answer : 00-Mbps version called Fast Ethernet. 1000-Mbps version called Gigabit Ethernet. Both 100-Mbps and 1000-Mbps Ethernets are designed to be used in full-duplex, point-to-point configurations, which mean that they are typically used in switched networks.

IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Last Answer : A) 1000 BASE-T

IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Last Answer : A) 1000 BASE-T

IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2C) 11 D) 22

Description : IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2 C) 11 D) 22

Last Answer : 22

IEEE 802.11b, has a datarate of _____Mbps. A) 1 B) 2 C) 5.5 D) none of the above

Description : IEEE 802.11b, has a datarate of _____Mbps. A) 1 B) 2 C) 5.5 D) none of the above

Last Answer : 5.5

A commonly used fiber-based system for LANs is: a. FDDI b. high-speed Ethernet c. gigabit Ethernet d. all of the above

Description : A commonly used fiber-based system for LANs is: a. FDDI b. high-speed Ethernet c. gigabit Ethernet d. all of the above

Last Answer : d. all of the above

Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s.b. 2 c. 2.5 d. 5

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

In a telephone system, the customer’s telephone directory numbering is from 000 to 999, what is the capacity of the system? A. 1000 lines B. 100,000 lines C. D. 100 lines lines

Description : In a telephone system, the customer’s telephone directory numbering is from 000 to 999, what is the capacity of the system? A. 1000 lines B. 100,000 lines C. 10,000 lines D. 100 lines

Last Answer : A. 1000 lines

is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Description : is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Last Answer : b. 100 BASE-TX

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

The maximum length of a "thick" Ethernet cable is ……….. A. 100 meters B. 200 meters C. 500 meters D. 1000meters

Description : The maximum length of a "thick" Ethernet cable is ……….. A. 100 meters B. 200 meters C. 500 meters D. 1000meters

Last Answer : C. 500 meters

Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of above

Description : Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of above

Last Answer : D) All of above

Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of the above

Description : Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of the above

Last Answer : D) All of the above

Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of the above

Description : Which of the following are Gigabit Ethernets? A) 1000 BASE-SX B) 1000 BASE-LX C) 1000 BASE-CX D) All of the above

Last Answer : D) All of the above

In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Description : In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Last Answer : (A) twisted pair, 100 metres

Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Last Answer : Manchester

The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Last Answer : 1518

The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Description : The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Last Answer : none of the above

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

Which of the following couldnot be an Ethernet multicast destination? A) B7:7B:6C:DE:10:00 B) 7B:AA:C1:23:45:32 C) 7C:56:21:1A:DE:F4 D) 83:32:21:21:4D:34

Description : Which of the following couldnot be an Ethernet multicast destination? A) B7:7B:6C:DE:10:00 B) 7B:AA:C1:23:45:32 C) 7C:56:21:1A:DE:F4 D) 83:32:21:21:4D:34

Last Answer : 7C:56:21:1A:DE:F4

Which of the following couldnot be an Ethernet unicast destination? A) 43:7B:6C:DE:10:00 B) 44:AA:C1:23:45:32 C) 46:56:21:1A:DE:F4 D) 48:32:21:21:4D:34

Description : Which of the following couldnot be an Ethernet unicast destination? A) 43:7B:6C:DE:10:00 B) 44:AA:C1:23:45:32 C) 46:56:21:1A:DE:F4 D) 48:32:21:21:4D:34

Last Answer : 43:7B:6C:DE:10:0

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

Which of the following arevalid Minimum and Maximum zoom sizes in MSOffice? A. 10, 100 B. 20,250 C. 10, 500 D. 10,1000

Description : Which of the following arevalid Minimum and Maximum zoom sizes in MSOffice? A. 10, 100 B. 20,250 C. 10, 500 D. 10,1000

Last Answer : 10, 500

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

- MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Description : - MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Last Answer : DLCI

What type of network device allows youto share your connection to the Internet with other computers in your home? A) Ethernet card B) NIC C) Router D) Cat 5

Description : What type of network device allows youto share your connection to the Internet with other computers in your home? A) Ethernet card B) NIC C) Router D) Cat 5

Last Answer : Router

In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Last Answer : CRC

In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Last Answer : preamble

In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Last Answer : data link

______ is the most widelyused local area networkprotocol. A) Token Ring B) Token Bus C) Ethernet D) none of the above

Description : ______ is the most widelyused local area networkprotocol. A) Token Ring B) Token Bus C) Ethernet D) none of the above

Last Answer : Ethernet

If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : unicast

f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : multicast

. What is the hexadecimal equivalentof the Ethernet address 01011010 0001000101010101 00011000 10101010 00001111? A) 5A:88:AA:18:55:F0 B) 5A:81:BA:81:AA:0F C) 5A:18:5A:18:55:0F D) 5A:11:55:18:AA:0F

Description : . What is the hexadecimal equivalentof the Ethernet address 01011010 0001000101010101 00011000 10101010 00001111? A) 5A:88:AA:18:55:F0 B) 5A:81:BA:81:AA:0F C) 5A:18:5A:18:55:0F D) 5A:11:55:18:AA:0F

Last Answer : 5A:11:55:18:AA:0F

In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Description : An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Last Answer : IP

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent

Description : The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent

Last Answer : 0x000000000000

was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above

Description : was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above

Last Answer : a. Star LAN

Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a

Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a

Last Answer : c. i-c, ii-a, iii-d, iv-b