............ implies that all subnets obtained from the same network use the subnet mask.
A) Static subnetting
B) Dynamic Subnetting
C) Variable length subnetting
D) Both B and C

1 Answer

Answer :

A) Static subnetting

Related questions

Description : ........ implies that all subnets obtained from the same network use the subnet mask. A) Static subnetting B) Dynamic Subnetting C) Variable length subnetting D) Both B and C

Last Answer : A) Static subnetting

Description : ………………….. implies that all subnets obtained from the same subnet mask. A) Static subnetting B) Dynamic subnetting C) Variable length subnetting D) Both B and C

Last Answer : A) Static subnetting

Description : You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. ... B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Last Answer : 255.254.0.0

Description : The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Last Answer : C) Subnet number and host number.

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Description : With anIP address of 100, you currently have 80 subnets. What subnet mask should you use to maximize the number of available hosts? A. 192 B. 224 C. 240 D. 248 E. 252

Last Answer : 252

Description : With anIP address set starting with 150, you currently havesix offices that you are treating as subnets. Plans are in place toopen 10 more officesbefore the end of theyear. What subnet mask should you useto ... maximize thenumberof hosts available at eachsite? A. 192 B. 224 C. 240 D. 248 E. 252

Last Answer : 248

Description : hosts per subnet. What subnet mask will you use? * 255.255.255.248 * 255.255.255.128 * 255.255.255.192 * 255.255.255.240

Last Answer : Correct answer: A By borrowing 5 bits from the last octet, you can. have 30 subnets. If you borrowed only 4 bits you could only have 14 subnets. The formula is (2 to the power of n)-2. By borrowing ... To get 20 subnets, you would need to borrow 5 bits so the subnet mask would be 255.255.255.248.

Description : You are working with a network thathas the network ID 192.168.10.0. What subnet should you use that supportsup to 25 hosts and a maximum number of subnets? A. 255.255.255.192 B. 255.255.255.224 C. 255.255.255.240 D. 255.255.255.248 E. 255.255.255.252

Last Answer : 255.255.255.224

Description : Consider the given network implementation scenario. For the given classful NID 199.10.20.0/24, the requirement is to create 13 subnets. With given details, find the range of first and last valid IP in 15th subnet. a. ... .20.225 to 199.10.20.238 c. 199.10.20.193 to 199.10.20.206 d. Not of these

Last Answer : a. A Only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

Description : Which among the following definitions is correct: a) Address - The unique number ID assigned to one host or interface in a network b) Subnet - A portion of a network sharing a particular subnet address c) ... to the host d) Interface - A network connection e) None of These f) All of the Above

Last Answer : f) All of the Above

Description : Which among the following definitions is correct: a) Address - The unique number ID assigned to one host or interface in a network b) Subnet - A portion of a network sharing a particular subnet address c) ... to the host d) Interface - A network connection e) None of These f) All of the Above

Last Answer : f) All of the Above

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

Description : Which of the following is/ are the drawbacks of Ring Topology? A) Failure of one computer, can affect the whole network B) Adding or removing the computers disturbs the network activity. C) If the central hub fails, the whole network fails to operate. D) Both of A and B

Last Answer : D) Both of A and B

Description : The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Last Answer : c. 62 subnets and 1022 hosts.

Description : There are two types of designs for communication subnets: they are ………… A. Point-to-Point channels and Broadcast channels B. packet-switched subnet and store-and-forward C. Multicasting and Broadcasting D. Point-to-Point channels and store-and-forward

Last Answer : A. Point-to-Point channels and Broadcast channels

Description : 2.address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

Description : The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Last Answer : A) IPsec

Description : A ..................is an extension of an enterprise’s private intranet across a public Network such as the Internet across a public Network such as the Internet, creating a secure private connection. A) VNP B) VPN C) VSN D) VSPN

Last Answer : B) VPN

Description : State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Last Answer : C) True, True

Description : .................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Last Answer : A) Tunneling

Description : A firewall is installed at the point where the secure internal network and untrusted external network meet which is also known as ……………… A) Chock point B) meeting point C) firewall point D) secure point

Last Answer : A) Chock point

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) ... v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

Description : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Last Answer : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

Description : 8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

Description : Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Which is not the Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Last Answer : C) i-c, ii-a, iii-d, iv-b

Description : Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Last Answer : Europeans Registry for Internet Numbers (ERIN)

Description : State whether the following is True or False. i) In bus topology, heavy Network traffic slows down the busspeed. ii) It is multipoint configuration. A) True, True B) True, False C) False, True D) False, False

Last Answer : A) True, True

Description : In a................ topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : Mesh

Description : In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B

Last Answer : D) A and B

Description : Which layers of the OSI determines the interface often system with the user? A) Network B) Application C) Data link D) Session

Last Answer : B) Application

Description : Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Last Answer : D) Gateway

Description : What is the name of the network topology in which there are bi-directional links between each possible node? A) Ring B) Star C) Tree D) Mesh

Last Answer : Mesh

Description : Find out the OSI layer, which performs token management. A) Network Layer B) Transport Layer C) Session Layer D) Presentation Layer

Last Answer : C) Session Layer

Description : The performance of data communications network depends on .............. A) Number of users B) The hardware and software C) The transmission D) All of the above

Last Answer : D) All of the above

Description : Compare peer to peer network and server based networks.

Last Answer : Peer to Peer Network Server Based Network It is a decentralized management It is centralized management It is easy to set up & no administrator required It is complex to set ... client has less power. Uses less expensive computer hardware. It is hardware intensive.

Description : State features of any one network control devices. 

Last Answer : A hardware device that are used to connect computers, printers, fax machine and other electronic devices to a network are called network devices. These devices transfer data in a fast, ... transforms incoming analog signals into their digital equivalents. A two way communication is established.

Description : State the situations under which gateways are necessary in the network.

Last Answer : Gateway operates at all 7 layers of the OSI model. It is a device, which connects two different dissimilar n/w which have same function of communication. Situation where gateways are necessary ... case of different frame sizes, data rates, format, acknowledgement schemes, and priority schemes tec.

Description : Enlist the components of computer network. Describe any one in brief.

Last Answer : The components of computer network are: Hub Router Modem Bridge Switches Network Interface Card Cables and connectors Crimping tool LAN tester Explanation ... into analog format so that it can be transferred by using currently available infrastructure. 

Description : Discuss any four network features.

Last Answer : 1) File sharing: File sharing is the primary feature of network. Due to use of networks, the sharing of files becomes easier. File sharing requires a shared directory or disk drive to which ... has internet services such as FTP servers or Usenet servers. 7) Network security: Internal & External

Description : Give any four selection criteria for selecting network topology.

Last Answer : Selection criteria for selecting network topology. 1. Size of the network & number of devices or nodes being connected. 2. Ease of configuration & installing. 3. The ease of adding new device in an ... hubs etc. 7. Costs involved. 8. Need of security. 9. Need of network administration. 

Description : Compare Server based network and peer-to-peer network.

Last Answer : Compare Server based network & Peer to Peer network Server based network Peer to Peer 1. It is much like company uses centralized management. 1. It is much like company uses ... 7.It support small Network 8.Better performance 8.Might hurt user's performance

Description :  Write in brief any two roles of network control devices in computer network.

Last Answer : Two roles of network control devices in computer: Role of repeater: Generates the original signal. Operates in the physical layer. Role of Bridges: Bridges utilize the address ... Role of Gateways: Gateways provide translation services between incompatible networks and works in all layers.

Description : You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and192.168.7.0. What subnet mask can you use to combine these addresses intoone? A. 255.255.252.0 B. 225.255.254.0 C. 255.255.255.240 D. 255.255.255.252

Last Answer : 255.255.252.0

Description : A simple cabling method, known as the..................topology allows about 30 computers on a maximum cable length of about 600 feet. A) Ring B) Bus C) Star D) Mesh

Last Answer : Bus

Description : Why is the subnet mask important in determining the network address?

Last Answer : What is the answer ?

Description : You are designing a network which needs to support 200 users. You don't plan to extend the segment beyond the current number of users. Which subnet mask would best meet your needs? Select the best answer. A. 255.255.0.0 B. 255.255.255.0 C. 255.0.0.0 D. 255.224.0.0 E. 255.255.255.200

Last Answer : 255.255.255.0