Why does a bar of soap end up different from what it started as?

Why does a bar of soap end up different from what it started as?
by

1 Answer

Answer :

My soap is the same all the way to the end. It gets smaller but never changes color.
by

Related questions

What kind of laundry soap do you use?

Description : What kind of laundry soap do you use?

Last Answer : Whatever national brand is cheapest.

What are your favourite cleaning products?

Description : What are your favourite cleaning products?

Last Answer : Organic distilled white vinegar is my favorite. It's a very safe cleaning product that I use to clean my kitchen counter top. All I have to do is spray, wipe, and dry. I think it's usually used for ... I try to be eco, but for all I know, there could be some room for improvement in my methods.

Is it safe to mix Pine Sol and Javex?

Description : Is it safe to mix Pine Sol and Javex?

Last Answer : These should not be mixed. The MSDS for Pine Sol says it should not be mixed with bleach-containing products. I had to look Javex up, but found that it is bleach (basically Clorox). Mixing these together can cause harmful chlorine gas which can irritate the eyes and more.

What are the advantages of Mr. Clean sponges?

Description : What are the advantages of Mr. Clean sponges?

Last Answer : You mean the Magic Erasers? I personally think they’re amazing and it’s the only way I can get my bathtub sparkly clean. It just takes a lot of the hard work out of scrubbing and scrubbing and scrubbing with a regular sponge, rag, etc. The dirt and grime just comes right off with little effort.

Anyone know what a "gex pad" is?

Description : Anyone know what a "gex pad" is?

Last Answer : answer:I could be wrong @srmorgan, but Bosch has a sander known as a GEX. My best guess is that the book meant a sanding pad. EDIT: In checking on the GEX, I see the sand paper attaches to ... for greenware here and here is a site which also shows the use of a cleaning pad for scraping greenware.

Which is more cost-effective: liquid or dry dishwasher detergent?

Description : Which is more cost-effective: liquid or dry dishwasher detergent?

Last Answer : answer:Neither, the tabs work the best. The tabs have the highest consumer ratings year after year. There's less chance for human error too little or too much soap can have you re-doing the ... tends to damage flatware and etch your glassware. The liquids tend to leave a lot of residue behind.

Which cleaning products can pinch hit for others?

Description : Which cleaning products can pinch hit for others?

Last Answer : Denatured alcohol will clean a ton of stuff. Stuff that isn’t in your body, of course.

What is the best way to clean mold off my leather purse without destroying it?

Description : What is the best way to clean mold off my leather purse without destroying it?

Last Answer : There are a lot of different types of leather cleaners available at various outlets—I would check to make sure you get a gentle one. I know Coach makes one, and also Leatherstuff.com sells one which I think is very popular.

For the yoga members: Do you clean your mat? and how?

Description : For the yoga members: Do you clean your mat? and how?

Last Answer : My yoga teacher said she just put hers in the washing machine. I couldn’t imagine doing that, myself, not with a rubber mat.

How to clean a laptop keyboard after a bird has pooped on it?

Description : How to clean a laptop keyboard after a bird has pooped on it?

Last Answer : I wouldn’t even bother, but I guess that’s just me. If it bothers you, wipe it down with some isopropyl.

What is your experience with a steam mop?

Description : What is your experience with a steam mop?

Last Answer : I have a Shark, but I wish I'd bought the Bissell. It does a wonderful job & is very easy to use. But the Bissell's head rotates every which way & the Shark's doesn't. Just back & forth, not side ... only thing to do over. But it cleans great, & the floor dries super fast. I think you'd like one.

What do you use to clean your LCD screen?

Description : What do you use to clean your LCD screen?

Last Answer : Just use water and a microfiber cloth. You really don’t need anything else, and some screens can be damaged if you use anything else.

Products to fight body acne?

Description : Products to fight body acne?

Last Answer : all you need is neutrogena body clear body scrub. thats what its called. go buy it. thats it.

What is the most foolproof method of removing mildew from caulk?

Description : What is the most foolproof method of removing mildew from caulk?

Last Answer : Marina I find bleach to be the best and most effective. I've used it to clean mold/mildew out of apartment bathrooms. These cleaners work well too: *TSP *Tilex Mildew *The Works But, most ... , then use a high quality silicone caulk to replace it with. You should eliminate the problem this way.

Why is my fore-head so friggin dry!

Description : Why is my fore-head so friggin dry!

Last Answer : Use moisturizer as appose to facial wash. This has happened to me a few times. Get some E45 wacked on there ;)

That "Clean Shower" stuff that you spray on the shower walls and it cleans automatically...can you spray it on the rest of the bathroom walls if they're the same tile?

Description : That "Clean Shower" stuff that you spray on the shower walls and it cleans automatically...can you spray it on the rest of the bathroom walls if they're the same tile?

Last Answer : you must believe in magic.

How do I remove paint splatters on my truck?

Description : How do I remove paint splatters on my truck?

Last Answer : paint over the spots in medium to dark gray?

Is there any way to clean oil off of a carport?

Description : Is there any way to clean oil off of a carport?

Last Answer : I have heard kitty litter will help get all the surface oil up. Not certain where to do after that except maybe some TSP.

Could you recommend a good fabric cleaner that you have used that has worked well for you?

Description : Could you recommend a good fabric cleaner that you have used that has worked well for you?

Last Answer : answer:What’s the fabric? (Next time buy food-colored fabric.) Turn the chairs upside down and see whether the seats can be removed easily. Then you can buy other fabric and staple on. I have no recommendations for actual fabric cleaners. They are all nasty and have fumes you don’t want to breathe.

What is the best bar soap and why? I don't like liquid soap.

Description : What is the best bar soap and why? I don't like liquid soap.

Last Answer : Lever 2000. What soap smells like it was made for a man?

What can I do with all these bar soap bits?

Description : What can I do with all these bar soap bits?

Last Answer : Yes. Put them into a tin or some sort of mold and add water. Just let it sit until it melts all the bars and forms one cake of soap. Then take the cake out and crack it up into pieces. If you ... ice cube trays or some other small containers suitable as a soap size. I used to do this all the time.

Do you prefer bar soap or liquid soap.?

Description : Do you prefer bar soap or liquid soap.?

Last Answer : I use bar soap and lather up in a frothy mess and then step out of the stream of water and go nuts on my body with one of these.

For non-shower gel users: what is your bath bar soap of choice?

Description : For non-shower gel users: what is your bath bar soap of choice?

Last Answer : I don’t use commercial soaps with chemical fragrances. I’ll use a non carcinogenic soap with natural scent in it, but I am not particular as to brand name.

What makes a great bath bar soap?

Description : What makes a great bath bar soap?

Last Answer : I like scent and how it leaves my skin feeling. For years I've used dove because so many family members have allergies but now its just my husband and myself and I like a soap with a soft ... better and smelled a bit stronger. But for over all health of the skin and smoothness, it is awesome.

What do you do with your bar of soap when it has dwindled down?

Description : What do you do with your bar of soap when it has dwindled down?

Last Answer : answer:I merge it onto a new bar of soap by wetting them both down and pressing them together. “Waste not, want not”, I always say.

Why does the a bar of soap lather less when it gets smaller?

Description : Why does the a bar of soap lather less when it gets smaller?

Last Answer : Less surface area?

What is the best way to attach my old sliver of soap to the new bar?

Description : What is the best way to attach my old sliver of soap to the new bar?

Last Answer : In the shower, with both soaps wet, glue them together, watch them stick!

Is it better to use bar soap or shower gel?

Description : Is it better to use bar soap or shower gel?

Last Answer : answer:No, I don't think that's true. Even if germs did accumulate on the bar, they would be destroyed when you began to lather up. Unless you use a new washcloth everyday ... . http://www.nytimes.com/2007/07/10/science/10qna.html?ex=1341720000&en=b36ad65085b650eb&ei=5088&partner=rssnyt&emc=rss

Is a bar of soap pounds or ounces?

Description : Is a bar of soap pounds or ounces?

Last Answer : Ounces. Most regular-size bars of soap that I have seen range from 3 -5 ounces each.

Can a bar of soap get dirty?

Description : Can a bar of soap get dirty?

Last Answer : Technically yes, but it’s not something to lose sleep over. Germs do like to live on bars of soap, but they are typically washed away as you wash your hands. A few studies (which, keep in mind, ... Also, if you rinse your soap before use, you can send many of the remaining germs down the drain.

Can a bar of soap get dirty?

Description : Can a bar of soap get dirty?

Last Answer : Technically yes, but it’s not something to lose sleep over. Germs do like to live on bars of soap, but they are typically washed away as you wash your hands. A few studies (which, keep in mind, ... Also, if you rinse your soap before use, you can send many of the remaining germs down the drain.

Stanley loved fishing and also loved boasting about how an amazing person he is. One day he went into a bar after fishing, and started telling people in the bar about something that just happened. 'So I was fishing by the waters, really nice breeze, and suddenly there was this person who creeped from behind and wanted to stab me in the stomach. Because I'm so good in Kung Fu, I turned back and WHAM! I slapped him in the face!' Everyone enjoyed the rest of the story when one person asked him: 'You're lying, Stan, are you?' How did the man knew that Stanley was lying? -Riddles

Description : Stanley loved fishing and also loved boasting about how an amazing person he is. One day he went into a bar after fishing, and started telling people in the bar about something that just happened. 'So I was ... : 'You're lying, Stan, are you?' How did the man knew that Stanley was lying? -Riddles

Last Answer : How can the man stab Stanley in the stomach if he's creeping up from BEHIND?

The end products of saponification: (A) glycerol (B) acid (C) soap (D) Both (A) and (C)

Description : The end products of saponification: (A) glycerol (B) acid (C) soap (D) Both (A) and (C)

Last Answer : Answer : D

Jason is lying dead. He has an iron bar across his back and some food lying in front of him. How did Jason meet his sorry end? -Riddles

Description : Jason is lying dead. He has an iron bar across his back and some food lying in front of him. How did Jason meet his sorry end? -Riddles

Last Answer : He is a mouse caught in a mousetrap.

When I bump one end of a long metal bar, the other end instantaneously moves. Can I use this to send messages faster than light? -Space

Description : When I bump one end of a long metal bar, the other end instantaneously moves. Can I use this to send messages faster than light? -Space

Last Answer : When you bump one end of a long metal bar, the other end does not instantaneously move. The movement would be instantaneous if the bar were perfectly rigid, but perfectly rigid materials are fundamentally ... the bar does not permanently deform). Source: wtamu.edu by Sir Christopher S Baird......

Are the magnetic lines force of a bar magnets strongest at the end of the magnet or in the middle?

Description : Are the magnetic lines force of a bar magnets strongest at the end of the magnet or in the middle?

Last Answer : Feel Free to Answer

In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Description : In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Last Answer : (B) At the built-in upper cross-section

The length of the straight portion of a bar beyond the end of the hook, should be at least (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Seven times the diameter

Description : The length of the straight portion of a bar beyond the end of the hook, should be at least (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Seven times the diameter

Last Answer : Answer: Option D

The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

Registration of a cutter bar means a) Centre of knife must stop in the centre of guard on each stroke b) Centre of knife should be ahead of guard c) Centre of knife should be behind the guard d) Centre of knife should be at the end of the guard

Description : Registration of a cutter bar means a) Centre of knife must stop in the centre of guard on each stroke b) Centre of knife should be ahead of guard c) Centre of knife should be behind the guard d) Centre of knife should be at the end of the guard

Last Answer : ans a

It is always provided on each end of the cutter bar to regulate the height of cut and to provide easy and smooth sliding of the cutter bar on the land. b. Plate c. pitman d. None of above

Description : It is always provided on each end of the cutter bar to regulate the height of cut and to provide easy and smooth sliding of the cutter bar on the land. b. Plate c. pitman d. None of above

Last Answer : Ans-    b. shoe

End anchorage of bars is taken as the greater of [ A ] Effective depth or 12 times the diameter of bar [ B ] Effective depth or 16 times the diameter of bar [ C ] Effective depth of 24 times the diameter of bar [ D ] Effective depth of 48 times the diameter of bar

Description : End anchorage of bars is taken as the greater of [ A ] Effective depth or 12 times the diameter of bar [ B ] Effective depth or 16 times the diameter of bar [ C ] Effective depth of 24 times the diameter of bar [ D ] Effective depth of 48 times the diameter of bar

Last Answer : [ A ] Effective depth or 12 times the diameter of bar

The length of bar necessary to develop the full strength of the bar is called [ A ] Bond [ B ] Development length [ C ] End anchorage [ D ] Splicing

Description : The length of bar necessary to develop the full strength of the bar is called [ A ] Bond [ B ] Development length [ C ] End anchorage [ D ] Splicing

Last Answer : [ B ] Development length

End anchorage of bars is taken as the greater of [ A ] Effective depth or 12 times the diameter of bar [ B ] Effective depth or 16 times the diameter of bar [ C ] Effective depth of 24 times the diameter of bar [ D ] Effective depth of 48 times the diameter of bar

Description : End anchorage of bars is taken as the greater of [ A ] Effective depth or 12 times the diameter of bar [ B ] Effective depth or 16 times the diameter of bar [ C ] Effective depth of 24 times the diameter of bar [ D ] Effective depth of 48 times the diameter of bar

Last Answer : [ A ] Effective depth or 12 times the diameter of bar

The length of bar necessary to develop the full strength of the bar is called [ A ] Bond [ B ] Development length [ C ] End anchorage [ D ] Splicing

Description : The length of bar necessary to develop the full strength of the bar is called [ A ] Bond [ B ] Development length [ C ] End anchorage [ D ] Splicing

Last Answer : [ B ] Development length

A shaft of length L is subject to a constant twisting moment T along its length L, then angle q through which one end of the bar will twist relative to other will be (a) T/g (b) T/GJ (c) GJ/TL (d) TL/GJ

Description : A shaft of length L is subject to a constant twisting moment T along its length L, then angle q through which one end of the bar will twist relative to other will be (a) T/g (b) T/GJ (c) GJ/TL (d) TL/GJ

Last Answer : (d) TL/GJ

o over come the rear ward deflection the load given to outer end of the cutter bar is about..... (a)1.57cm/m (b) 2.0cm/m (b)3.0cm/m (d) 3.5cm/m

Description : o over come the rear ward deflection the load given to outer end of the cutter bar is about..... (a)1.57cm/m (b) 2.0cm/m (b)3.0cm/m (d) 3.5cm/m

Last Answer : b) 2.0cm/m

“You’re standing on the surface of the Earth. You walk one mile south, one mile west and one mile north. You end up exactly where you started. Where are you?” -Riddles

Description : “You’re standing on the surface of the Earth. You walk one mile south, one mile west and one mile north. You end up exactly where you started. Where are you?” -Riddles

Last Answer : We will be at the same position where we started. That is because the Earth is not flat and is approximately shaped like a Potatoe. Sol ⟹ When we start at any of the 2 poles and move 1 ... the video through the link provided below; https://www.youtube.com/watch?v=JQf4p4aGf9o HOPE IT HELPS! :)