The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

The examples of Interior Gateway Protocols (IGP) are.
i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP)
iii) Border Gateway Protocol (BGP)
A) i only
B) i, and ii only
C) i and iii only
D) All i, ii and iii
by

1 Answer

Answer :

B) i, and ii only
by

Related questions

Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Description : Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Last Answer : B) i, and ii only

________ is an interdomain routingprotocol using path vector routing. A) BGP B) RIP C) OSPF D) none of the above

Description : ________ is an interdomain routingprotocol using path vector routing. A) BGP B) RIP C) OSPF D) none of the above

Last Answer : BGP

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The metric usedby _______ is the hopcount. A) OSPF B) RIP C) BGP D) none of the above

Description : The metric usedby _______ is the hopcount. A) OSPF B) RIP C) BGP D) none of the above

Last Answer : RIP

The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

The Open Shortest Path First (OSPF)protocol is an intradomain routing protocolbased on _______ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Open Shortest Path First (OSPF)protocol is an intradomain routing protocolbased on _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) ... v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Description : State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Last Answer : i) Repeater: Repeaters are used to take the distorted, weak and corrupt input signal and regenerate this signal at its output. It ensures that the signals are not distorted or weak before it ... and decides whether to forward or discard it. It sends packets between two networks of same type.

Define protocol. Give the name of any two protocols.

Description : Define protocol. Give the name of any two protocols.

Last Answer : Define protocol: There are certain rules that must be followed to ensure proper communication & a set of such rules is known as protocol. Example: UDP, TCP/IP, SMTP, HTTP, SSL, FTP etc

The Routing Information Protocol (RIP) is an intradomain routing based on _________ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Routing Information Protocol (RIP) is an intradomain routing based on _________ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : distancevector

State whether the following statement are true. i) An application-level gateway is often referred to as a proxy. ii) In proxy, a direct connection is established between the client and destination server. A) True, False B) False, True C) True, True D) False, False

Description : State whether the following statement are true. i) An application-level gateway is often referred to as a proxy. ii) In proxy, a direct connection is established between the client and destination server. A) True, False B) False, True C) True, True D) False, False

Last Answer : A) True, False

Explain following protocols: I. PPP II. SLIP

Description : Explain following protocols: I. PPP II. SLIP

Last Answer : (i)PPP:-PPP means point to point protocol. It is a much more developed protocol than SLIP(which is why it is replacing it).It transfers additional data, better suited to data transmission over the ... character(the END character, the ASCII code of which is 192).A SLIP frame looks like:

State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The any cast service is included in IPV6. A) True, False B) True, True C) False, True D) False, False

Description : State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The any cast service is included in IPV6. A) True, False B) True, True C) False, True D) False, False

Last Answer : B) True, True

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

..................mode is used whenever either end of a security association is gateway. A) Tunnel B) Encapsulating C) Transport D) Gateway

Description : ..................mode is used whenever either end of a security association is gateway. A) Tunnel B) Encapsulating C) Transport D) Gateway

Last Answer : A) Tunnel

Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Description : Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Last Answer : D) All of the above

Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Description : Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Last Answer : D) Gateway

The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Description : The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Last Answer : A) IPsec

Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Description : Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Last Answer : A) FTP

Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Description : Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Last Answer : TCP/IP Model contains following layer. 1) Host-to-Network Layer - It defines characteristics of transmission media. It also concern with delivery of data when two systems are attached to same network ... such broadcasts are not forwarded by routers, so a RARP server is needed on each network. 

RIP stands for ________ a. Reduced Information Protocol b. Routing Internet Protocol c. Routing Information Protocol d. Reduced Internet Protocol

Description : RIP stands for ________ a. Reduced Information Protocol b. Routing Internet Protocol c. Routing Information Protocol d. Reduced Internet Protocol

Last Answer : c. Routing Information Protocol

Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Description : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Last Answer : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Last Answer : D) All i, ii, iii and iv

Proxy application gateway (i) acts on behalf of all intranet users wanting to access interne securely (ii)monitors all accesses to internet and allows access to only specified IP addresses (iii) disallows use of certain protocols with security problems (iv) disallows all internet users from accessing intranet a. i, ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Description : Proxy application gateway (i) acts on behalf of all intranet users wanting to access interne securely (ii)monitors all accesses to internet and allows access to only specified IP addresses (iii) disallows use of certain protocols with ... ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Last Answer : b. i, ii, iii 

It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Description : It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Last Answer : i. Setup:  ii. Name of topology: Star topology iii. Advantages of Star Topology 1) As compared to Bus topology it gives far much better performance, signals don't necessarily get ... as well number of nodes which can be added in such topology is depended on capacity of central device.

Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Description : Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Last Answer : 1. Data Encryption-Presentation Layer 2. Error Correction-Data link layer and Transport layer 3. File Transfer-Application layer 4. Data Encoding-Presentation layer

On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Description : On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Last Answer : A) SSL handshake protocol

At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Description : At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Last Answer : C) SSL record protocol

The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Description : The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Last Answer : A) SSL

.................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Description : .................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Last Answer : A) Tunneling

........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Description : Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Last Answer : B) Session Layer

In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B

Description : In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B

Last Answer : D) A and B

The name of the protocol which provides virtual terminal in TCP/IP model is. A) Telnet B) SMTP C) HTTP

Description : The name of the protocol which provides virtual terminal in TCP/IP model is. A) Telnet B) SMTP C) HTTP

Last Answer : A) Telnet

Define Protocol and Encapsulation.

Description : Define Protocol and Encapsulation.

Last Answer : i. Protocol: Protocol is defines as the set of rules and regulations to communicate between layers in networking. OR It is set of rules and conventions sender and receiver in data communication ... of encapsulation. OR Encapsulation is the process of adding the headers and footers to the data.

Explain connectionless and connection oriented protocol. Give the example for each type.

Description : Explain connectionless and connection oriented protocol. Give the example for each type.

Last Answer : Connection less protocol: These protocols do not establish a connection between devices. It is manually achieved by transmitting information in one direction, from source to destination without checking to ... SMTP establish a TCP connection between Sender And port number 25 of receiver

_______ is an implementation of multicast distance vector routing. It is asource-based routing protocol, based on RIP. A) MOSPF B) DVMRP C) CBT D) none of the above

Description : _______ is an implementation of multicast distance vector routing. It is asource-based routing protocol, based on RIP. A) MOSPF B) DVMRP C) CBT D) none of the above

Last Answer : DVMRP

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Description : Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Last Answer : S. No . Parameter Series Circuit Parallel Circuit 1 Resonating frequency 2 Impedance Minimum, Z = R Maximum, Z = L/CR 3 Current Maximum, I ... , I = V/(L/CR)  4 Magnification Voltage magnification takes place Current magnification takes place

For R-C series circuit draw (i) Circuit diagram (ii) Vector diagram (iii) Waveform of voltage and current

Description : For R-C series circuit draw (i) Circuit diagram (ii) Vector diagram (iii) Waveform of voltage and current

Last Answer : i) Circuit diagram ii)Vector diagram iii)Waveform of voltage and current

(i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Description : (i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Last Answer : (i) Bilateral Network: If the characteristic of network (response or behavior) is independent of the direction of current through its elements in it, then the network is called as a bilateral network e. ... A part of an electric network which lies between two junctions or nodes is known as branch. 

A closed path made by several branches of the network is known as?

Description : A closed path made by several branches of the network is known as?

Last Answer : A closed path made by several branches of the network is known as loop.

State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Description : State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Last Answer : C) True, True