Which of the following statement about the defective margins of amalgam restorations is true?+M07
A. The larger the breakdown, the greater the chance of decay.
IF THERE IS MARGINAL BREAKDOWN THIS DOSNT NECESSITATE THE PRESENCE OF CARIES  ALONG MARGIN
So the ans is Chances are increased

1 Answer

Answer :

A. The larger the breakdown, the greater the chance of decay.

Related questions

Description : In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop

Last Answer : A. The wider the gap the better the chance of secondary caries

Description : What is the most common fracture of Class II amalgam restorations: A. Isthmus because of insufficient depth B. Internal fracture C. Marginal ridge site

Last Answer : A. Isthmus because of insufficient depth

Description : Clinical /Proximal in some papers/ caries on radiographs are seen: M07************ A. Smaller than the real one B. Larger than the real one C. The same size

Last Answer : A. Smaller than the real one

Description : What is true about Angioneurotic oedema, A. Puffiness around the eyes, oedema of the upper lip with redness and dryness B. Caused by several deep restorations in the anterior teeth C. There is no caries, negative thermal tests, negative percussion and negative response to palpation

Last Answer : A. Puffiness around the eyes, oedema of the upper lip with redness and dryness B. Caused by several deep restorations in the anterior teeth

Description : .Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay ... in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Last Answer : C. Greater reduction in smooth surface caries from in pit and fissures

Description : Corrosion and discolouration of amalgam restorations is usually caused by: A. Sulphur oxides B. Oxygen C. Chlorides D. Over trituration

Last Answer : A. Sulphur oxides

Description : As far as surgical removal of wisdom teeth is concerned, which of the following is true?**CHECK A. Prophylactic prescription of antibiotic reduces dramatically the chances of infection B. Raising ... root E. The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Last Answer : C. Prophylactic prescription of dexamethasone will dramatically reduces post operative swelling

Description : The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Last Answer : A. Just supragingival whenever is possible

Description : When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Last Answer : C. When restoring with GIC base and composite lamination

Description : If amalgam gets contaminated with moisture, the most uncommon result is:** A. Blister formation B. Post operative pain C. Secondary caries D. Lower compressive strength

Last Answer : C. Secondary caries

Description : Caries which is close to the pulp chamber; on x rays you find ‘dens in dente’; the right treatment is: A. Zinc oxide eugenol cement and amalgam B. Pulpectomy C. Pulpotomy D. Calcium hydroxide on pulp and amalgam

Last Answer : B. Pulpectomy

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

Description : Dental caries of the proximal surfaces usually starts at, A. Somewhere between the ridge and the contact area B. Just gingival to contact areas C. Just about the gingival margin

Last Answer : B. Just gingival to contact areas

Description : Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Last Answer : c. Fissure of the surface of the amalgam.

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

Description : The principal reasons for placing a gingival interproximal wedge in conjunction with a matrix for amalgam condensation are to: 1. separate the teeth slightly 2. keep the band tight at the gingival margin 3. contribute to the ... b. 1,2,4 c. 2,3,4 d. 1,3,4 e. all of the above

Last Answer : e. all of the above

Description : A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Last Answer : B. Between core and cement

Description : Burnishing the amalgam after carving, what is the benefit? a.Completing the condensation at the marginal edges. b.eleminating excessive mercury

Last Answer : .Completing the condensation at the marginal edges.

Description : .The main advantage of amalgam with high content of Cu is: A. Better marginal sealing B. Less corrosion C. Better tensile strength D. Higher and immediate compressive strength

Last Answer : B. Less corrosion

Description : Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with ... The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Last Answer : D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Description : In testing for mobility, which of the following statement is true:** M07 A. Heavy pressure must sometimes be used to test mobility B. Only lateral mobility is significant in ... examination each tooth should be tested individually for hyper mobility E. Reliance on radiograph is essential

Last Answer : D. During the periodontal examination each tooth should be tested individually for hyper mobility

Description : Proximal caries on x-rays appears: A. Smaller than clinically seen B. Larger than clinically seen C. The same

Last Answer : A. Smaller than clinically seen

Description : A major difference between light cured and chemical cured composite is that during setting or in function the light cured material tends to:******** VERY IMP A. Seal the margins better and ... on time C. Undergo greater colour change D. Shrink more rapidly E. Posses greater fracture toughness

Last Answer : D. Shrink more rapidly

Description : Which of the following is NOT a complication of radiation to head and neck area:** A. Xerostomia B. Mucositis C. Increased caries D. Heightened taste sensation E. Increased risk of osteomyelitis

Last Answer : D. Heightened taste sensation

Description : High copper amalgam lasts longer than low copper amalgam because of:**  A. Increased compressive strength  B. Increased corrosion resistance  C. High creep  D. Increased tensile strength  E. Decreased setting expansion 

Last Answer : A. Increased compressive strength 

Description : High content copper amalgam . . . a. generally requires greater energy to accomplish trituration b. should be placed rapidly in large increments c. Continues to leak since the ... not cause galvanism in oral environment e. is equally effective as conventional alloys in clinical studies

Last Answer : a. generally requires greater energy to accomplish trituration

Description : As far as localised alveolar osteitis (dry socket) is concerned; which one of the following is true? M07 A. The incidence in the mandible and maxilla is similar B. The prophylactic ... diagnosis and irrigation is mandatory E. Zinc oxide eugenol and alvogyl dressing promote a rapid bone growth

Last Answer : C. Excessive fibrinolysis is the likely aetiology

Description : Which one of the following is true about oral hairy leukoplakia?** ADC M07 A. Associated with HIV virus infection and is commonly seen on the dorsal of the tongue B. Associated with HIV ... Always associated with trauma to the lateral side of the tongue E. Always associated with pernicious anaemia

Last Answer : B. Associated with HIV virus infection and is commonly seen on the lateral side of the tongue C. Usually caused by Candida species

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

Description : What is the purpose of making a record of protrusive relation and what function does it serve after it is made?******** M07 A. To register the condylar path and to adjust the inclination of ... C. To register the condylar path and to adjust the condylar guides of the articulator so that they are

Last Answer : C. To register the condylar path and to adjust the condylar guides of the articulator so that they are

Description : .What is the percentage of the echant agent used with composit resin restorations? a . 37% of phosphoric acid in water. b. 15% c. 18.5% d. 41%

Last Answer : a . 37% of phosphoric acid in water.

Description : Why do you itch enamel for composite restorations: A. To increase surface area B. To decrease surface area C. Does not really change the surface area D. Increase the chemical bonding capability E. Decrease the chemical bonding capability

Last Answer : A. To increase surface area

Description : Longest lasting resin restorations are,  A. Class I   B. Class II  C. Class III  D. Class IV 

Last Answer : C. Class III 

Description : In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity

Last Answer : E. Overextension of lining in cavity

Description : Etching techniques are used always to: A. minimise the leakage of restorations B. for aesthetic considerations

Last Answer : A. minimise the leakage of restorations

Description : .In which class of cavities do composite restorations show most durability: A. I B. II C. IV D. III E. V

Last Answer : D. III

Description : Class V composite resin restorations can be polished, A. 24 hours after application B. Immediately after application C. 3 to 4 days D. 3 to 4 weeks E. Not at all

Last Answer : B. Immediately after application

Description : When do you finish composite resin restorations: A. Immediately after curing B. After 24 hours C. A week after placement

Last Answer : A. Immediately after curing

Description : 12 years old child presents with symptoms of widespread gingivitis with bleeding and general malaise for several weeks. How would you manage this patient? M07 ********* A. Prescribe ... mouth wash. C. Give a prophylaxis with ultra sonic scaling D. Refer for haematological screening

Last Answer : D. Refer for haematological screening

Description : A 10 years-old boy presents with small greyish white lesion surrounded by a red halos on the soft palate and tonsillar pillars, small vesicles are found. He has fever and pain in the ear. The MOST probable diagnosis is?********** M07 A. Herpangina

Last Answer : A. Herpangina

Description : At birth, some calcified dental tissues are presented, M07 ******* A. All deciduous teeth and all permanent incisors B. All deciduous teeth and permanent central incisors C. All deciduous teeth and the first permanent molars D. Deciduous teeth only

Last Answer : C. All deciduous teeth and the first permanent molars

Description : Which of these muscles may affect the borders of mandibular complete denture, M07 ********* A. Mentalis (act on the lower border) B. Lateral pterygoid C. Orbicularis oris D. Levator angulioris E. Temporal

Last Answer : C. Orbicularis oris

Description : In planning and construction of a cast metal partial denture the study cast, M07 A. facilitate the construction of custom/special trays B. minimize the need for articulating C. provide only ... best assessed clinically D. can be used as a working cast when duplicating facilities are not available

Last Answer : A. facilitate the construction of custom/special trays

Description : When the enamel of the tooth is exposed to preparation containing high concentrations of fluoride the major reaction is: M07 A. Sodium fluoride B. Calcium fluoride C. Stannous fluoride D. Fluoroapatite

Last Answer : D. Fluoroapatite

Description : Which is the right sequence of the histological stages of tooth development? M07 A. Initiation, proliferation, histodifferentiation, morphodifferentiation, mineralization ... , mineralization D. Initiation, proliferation, morphodifferentiation, histodifferentiation, mineralization

Last Answer : A. Initiation, proliferation, histodifferentiation, morphodifferentiation, mineralization

Description : 8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the ... C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Last Answer : A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis)

Description : The inverse Square Law is concerned with intensity of radiation using type D film of 200mm target to film distance, the exposure time was 0.25s. What would be the exposure for the same situation with 400mm target to film distance? M07********** A. 0.5s B. 1.0s C. 2.0s D. 0.25s E. 0.125s

Last Answer : B. 1.0s