Description : What is the active agent in most home (night guard) bleaching solutions? a. 2-5% carbamide peroxide b. 10 - 15% Phosphoric acid c. 10 - 15% carbamide peroxide d. 35% hydrogen peroxide e. 5 - 10% citric acid Attention:
Last Answer : c. 10 - 15% carbamide peroxide
Description : Where can we see long lasting composit resin? a. Class III. b. Class II c. ClassV
Last Answer : a. Class III.
Description : Longest lasting resin restorations are, A. Class I B. Class II C. Class III D. Class IV
Last Answer : C. Class III
Description : Class V composite resin restorations can be polished, A. 24 hours after application B. Immediately after application C. 3 to 4 days D. 3 to 4 weeks E. Not at all
Last Answer : B. Immediately after application
Description : When do you finish composite resin restorations: A. Immediately after curing B. After 24 hours C. A week after placement
Last Answer : A. Immediately after curing
Description : Etching a hybrid glass ionomer-composite a. is necessary for composite resin bonding b. is not necessary for composite resin bonding c. is necessary for adding a glass ionomer cement for repair ... glass ionomer cement for repair e. a 3-5 second etch with 10% phosphoric acid is recommended
Last Answer : b. is not necessary for composite resin bonding
Description : Several applications have been suggested to increase the effectiveness of prophylactic application of topical fluoride which include all EXCEPT: A. Increase Fluoride ions in solution increase concentration B. Increase ... D. Pre-treat enamel with 0.5% phosphoric acid E. Use NH4F instead of NaF
Last Answer : B. Increase PH of fluoride
Description : Several approaches have been suggested to increase the fixation of professionally applied topical fluoride, which of the following statements IS INCORRECT regarding increasing the fixation? A. Increase concentration of ... with 0.5% phosphoric acid E. Use NH4F rather than NaF at a lower PH
Last Answer : B. Raise the PH of the fluoride solution
Description : The un-polymerized monomer in Self-cured resin is approximately:** A. 0.5% B. 2.5% C. 5% D. 10%
Last Answer : C. 5%
Description : Why do you itch enamel for composite restorations: A. To increase surface area B. To decrease surface area C. Does not really change the surface area D. Increase the chemical bonding capability E. Decrease the chemical bonding capability
Last Answer : A. To increase surface area
Description : Corrosion and discolouration of amalgam restorations is usually caused by: A. Sulphur oxides B. Oxygen C. Chlorides D. Over trituration
Last Answer : A. Sulphur oxides
Description : In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity
Last Answer : E. Overextension of lining in cavity
Description : Etching techniques are used always to: A. minimise the leakage of restorations B. for aesthetic considerations
Last Answer : A. minimise the leakage of restorations
Description : .In which class of cavities do composite restorations show most durability: A. I B. II C. IV D. III E. V
Last Answer : D. III
Description : What is true about Angioneurotic oedema, A. Puffiness around the eyes, oedema of the upper lip with redness and dryness B. Caused by several deep restorations in the anterior teeth C. There is no caries, negative thermal tests, negative percussion and negative response to palpation
Last Answer : A. Puffiness around the eyes, oedema of the upper lip with redness and dryness B. Caused by several deep restorations in the anterior teeth
Description : What is the most common fracture of Class II amalgam restorations: A. Isthmus because of insufficient depth B. Internal fracture C. Marginal ridge site
Last Answer : A. Isthmus because of insufficient depth
Description : A 45 years-old patient awoke with swollen face, puffiness around the eyes, and oedema of the upper lip with redness and dryness. When he went to bed he had no swelling, pain or ... B. Angioneurotic oedema C. Infectious mononucleosis D. Acute maxillary sinusitis E. Acute apical periodontitis
Last Answer : B. Angioneurotic oedema
Description : Which of the following statement about the defective margins of amalgam restorations is true?+M07 A. The larger the breakdown, the greater the chance of decay. IF THERE IS MARGINAL BREAKDOWN THIS DOSNT NECESSITATE THE PRESENCE OF CARIES ALONG MARGIN So the ans is Chances are increased
Last Answer : A. The larger the breakdown, the greater the chance of decay.
Description : The best way to clean a cavity before the placement of GIC is,** A. H2O2 B. Phosphoric Acid C. Polyacrylic acid 10% sturdavent 563pag
Last Answer : C. Polyacrylic acid 10% sturdavent 563pag
Description : What is the percentage of leukoplakia turning into cancer:** A. 5%-6% B. 10% C. 25%
Last Answer : A. 5%-6%
Description : How much percentage of the body water by weight is in the blood plasma. a. 1% b. 5% c. 10% d. 15%
Last Answer : 5%
Description : How much percentage of water lies between the cells. a.. 5% b. 10% c. 15% d. 20%
Last Answer : 15%
Description : The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%
Last Answer : Answer: Option C
Description : The percentage of carbon in low carbon steel is A. 0.05% B. 0.15% C. 0.3% D. 0.5%
Last Answer : B. 0.15%
Description : A person sold an item for Rs. 14280 after giving 15% discount on the labelled price and earned 19% profit on the cost price. What would have been the percentage profit, had he not given the discount? a) 30% b) 34% c) 40% d) 42.5% e) None of these
Last Answer : Labelled price = [(14280×100)/85] = Rs. 16800 Or, 23X/120 = 69/5 Or, X= [(69×120)/(23×5)] = 72km. Answer is: c)
Description : The percentage of Sinhala-speakers in Sri Lanka is the Tamil-speakers are percent. a. 74% and 18% b. 75% and 25% c. 59% and 41% d. 80% and 20%
Last Answer : a. 74% and 18%
Description : What is the advantage of composite over silicate resin: A. Less shrinkage B. Less surface erosion C. Less water absorption D. All of the above
Last Answer : D. All of the above
Description : A patient comes to you with medium pain of tooth filled with Composite resin as a result of cold or hot drinks, what will your initial management be, A. Remove the restorative material and ... material and place a sedative temporary material C. Place a coat of bonding material on the old composite
Last Answer : B. Remove the restorative material and place a sedative temporary material
Description : What is the best way to cement Maryland bridge, A. GIC B. Resin C. High compression restorative resin D. Zinc Phosphate cement E. Oxide Zinc and eugenol
Last Answer : B. Resin
Description : The clinical advantage of porcelain laminate veneers over composite resin veneers is: A. Color stability and resistance to abrasion B. Availability of self-curing or light activated placement (yes but not ... dentist's abilities) D. May be used in edge to edge occlusion or Class III relationships.
Last Answer : A. Color stability and resistance to abrasion
Description : When incrementally placing a large composite resin restoration, what effect does an air-inhibited layer on the surface of the first increment have on the bond between the first and the second increments? A. ... B. It is desirable and improves the bond C. It is undesirable and should be removed
Last Answer : B. It is desirable and improves the bond
Description : In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a hybrid layer by chemically reacting the intertubular dentin. 3. a hydrophilic ... a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4
Last Answer : b. 1,4
Description : On examination of a composite restoration you find a dark attain: A. Replace the composite B. Repair with unfilled resin C. Apply topical fluoride at the margin
Last Answer : A. Replace the composite
Description : In a posterior vital molar with a core the best material to restore is: A. Amalgam B. Composite resin C. GIC
Last Answer : A. Amalgam
Description : The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion ... porosity on the surface of the resin. D. Prevents porosity on the interior of the resin
Last Answer : B. Produces porosity on the internal portion of the resin.
Description : Sensitivity to hot and cold foods soon after cavity preparation and placement of GIC and composite resin in an upper incisor tooth is due to: A. Mechanical trauma due to cavity preparation B. Chemical C. Heat from GIC settings
Last Answer : A. Mechanical trauma due to cavity preparation
Description : A seven years-old boy fell off his bicycle 2 weeks ago and broke his maxillary central incisor. The pulp horn is visible as a pin point. The tooth is vital. Your treatment will be: A. Pulpectomy B. Place calcium hydroxide and fill with composite resin C. Calcium hydroxide pulpotomy
Last Answer : C. Calcium hydroxide pulpotomy
Description : Which material is not compatible with composite resin: A. Zinc Oxide eugenol (ZOE) B. Ca(OH)2 C. Carboxylate D. Zinc phosphate cement
Last Answer : A. Zinc Oxide eugenol (ZOE)
Description : Where do Maryland bridges lose retention often: A. Resin-metal B. Resin enamel C. Resin layer
Last Answer : A. Resin-metal
Description : .In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. ... and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength
Last Answer : B. A higher coefficient of thermal expansion and a lower crashing strength
Description : Which of the following restoration material’s strength is not effected by pins: A. Amalgam B. Composite resin
Last Answer : B. Composite resin
Description : Patient with class II division II; the lateral incisor is missing. You want to make a fixed bridge which of the following is suitable: A. Rocket bridge using central incisor as abutment ( ... al Maryland B. Cantilever using central incisor C. Fixed bridge using the central incisor and bicuspid
Last Answer : B. Cantilever using central incisor
Description : A patient on the dental chair has cardiac arrest. What is INCORRECT, A. Observing the vital signs and check that the air way is clear is at high importance B. Expired air has 15% O2 only, ... D. Intermittent positive pressure is better than mouth to mouth when it has been given at the same rate.
Last Answer : C. Intermittent positive pressure at the rate of 40/min will reduce the chances of cerebral hypoxia
Description : Pigmented naevus can undergo malignant: A. Always B. Never C. 10 to 15%
Last Answer : B. Never
Description : The volume shrinkage of methyl metacrylate monomer when polymerized is:** A. 12% B. 15% C. 18% D. 21%
Last Answer : D. 21%
Description : A patient with impacted canine; by moving the X ray tube distally the canine moves distally too; where do you expect the impacted canine: A. Labially impacted B. Palatally impacted ... -five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.
Last Answer : B. Palatally impacted Eighty-five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.
Description : Which one of the following is used as a sowing agent in the preparation of soft drinks? (1) Phosphoric acid (2) Phosphorus acid (3) Salicylic acid (4) Boric acid
Last Answer : (1) Phosphoric acid Explanation: Phosphoric acid was the foundation of the soft-drink industry, long before Coca-Cola's popularity. Phosphoric acid is deliberately added to soft drinks to give them a sharper flavor. It also slows the growth of molds and bacteria, which would otherwise multiply.
Last Answer : Phosphoric acid
Description : With dentin bonding agent, you apply: A. First acid etching to dentine and then bonding agent B. Bonding agent directly to dentine C. Chelating agent (EDTA) and bonding agent
Last Answer : A. First acid etching to dentine and then bonding agent
Description : What are the composit numbers between 40 and 50?
Last Answer : The prime numbers are 41, 43, and 47. The composite numberswould be the other numbers, so, if you include both 40 and 50, theyare 40, 42, 44, 45, 46, 48, 49, and 50.