The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

The cervical finish line of a full veneer crown preparation should be placed:
A. Just supragingival whenever is possible
B. According to the depth of gingival crevice
C. Subgingival to reduce ability of recurrent caries
D. At the junction of tooth and amalgam core
by

1 Answer

Answer :

A. Just supragingival whenever is possible
by

Related questions

In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. Reproduction of normal tooth incline in the gingival one third of the crown C. Slight over contouring of the tooth in the gingival one fifth of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Description : In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. ... of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Last Answer : B. Reproduction of normal tooth incline in the gingival one third of the crown

In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Description : A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Last Answer : B. Between core and cement

When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Description : When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Last Answer : C. When restoring with GIC base and composite lamination

In class II preparation it is difficult to place the gingival seat when preparation is extended too gingivally because the: A. Enamel rods are directed occlusally B. Marked cervical constriction

Description : In class II preparation it is difficult to place the gingival seat when preparation is extended too gingivally because the: A. Enamel rods are directed occlusally B. Marked cervical constriction

Last Answer : B. Marked cervical constriction

Clinical indications of pathogenic chronic periodontitis are: A. Mobility B. Dull pain on closing C. Presence of true pocket D. Apical migration of gingival epithelium E. Presence of subgingival calculus F. C, D & E

Description : Clinical indications of pathogenic chronic periodontitis are: A. Mobility B. Dull pain on closing C. Presence of true pocket D. Apical migration of gingival epithelium E. Presence of subgingival calculus F. C, D & E

Last Answer : F. C, D & E

In regard to Chlorhexidine mouth wash:** A. Is anionic ( opposite) B. Used in 0.02% concentration ( topical skin) C. Used in 0.12% concentration D. Penetrates the gingival crevice/pocket ( no)

Description : In regard to Chlorhexidine mouth wash:** A. Is anionic ( opposite) B. Used in 0.02% concentration ( topical skin) C. Used in 0.12% concentration D. Penetrates the gingival crevice/pocket ( no)

Last Answer : C. Used in 0.12% concentration

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Description : While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Last Answer : B. You extend your preparation and clean it

Dental caries of the proximal surfaces usually starts at, A. Somewhere between the ridge and the contact area B. Just gingival to contact areas C. Just about the gingival margin

Description : Dental caries of the proximal surfaces usually starts at, A. Somewhere between the ridge and the contact area B. Just gingival to contact areas C. Just about the gingival margin

Last Answer : B. Just gingival to contact areas

If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Description : If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Last Answer : b.parallel to the nearest external surface

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Description : A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Last Answer : C. Narrow

A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with extra mercury to give easier manipulative qualities C. Several small mixes, sequentially triturated D. Several small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Description : A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with ... small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Last Answer : C. Several small mixes, sequentially triturated

The retention pin in an amalgam restoration should be placed, A. Parallel to the outer wall B. Parallel to the long axis of tooth

Description : The retention pin in an amalgam restoration should be placed, A. Parallel to the outer wall B. Parallel to the long axis of tooth

Last Answer : A. Parallel to the outer wall

“Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Description : “Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Last Answer : B. Contamination at the porcelain metal interface

Which is the more retentive form for an anterior bridge A. ¾ partial veneer crown B. Class V inlay C. Pinlay Veneer D. Class III inlay with pins

Description : Which is the more retentive form for an anterior bridge A. ¾ partial veneer crown B. Class V inlay C. Pinlay Veneer D. Class III inlay with pins

Last Answer : A. ¾ partial veneer crown

The principal reasons for placing a gingival interproximal wedge in conjunction with a matrix for amalgam condensation are to: 1. separate the teeth slightly 2. keep the band tight at the gingival margin 3. contribute to the interproximal contact of the restoration 4. retract the gingival tissue a. 1,2,3 b. 1,2,4 c. 2,3,4 d. 1,3,4 e. all of the above

Description : The principal reasons for placing a gingival interproximal wedge in conjunction with a matrix for amalgam condensation are to: 1. separate the teeth slightly 2. keep the band tight at the gingival margin 3. contribute to the ... b. 1,2,4 c. 2,3,4 d. 1,3,4 e. all of the above

Last Answer : e. all of the above

The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Description : The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Last Answer : C. 2/3 tooth/root length

What is the ideal length for a post in post-core in an endodontically treated tooth: A. 2/3 of the tooth length B. ½ of the tooth length C. 1.5 times that of the crown D. Same as the anticipated crown

Description : What is the ideal length for a post in post-core in an endodontically treated tooth: A. 2/3 of the tooth length B. ½ of the tooth length C. 1.5 times that of the crown D. Same as the anticipated crown

Last Answer : A. 2/3 of the tooth length

In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop

Description : In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop

Last Answer : A. The wider the gap the better the chance of secondary caries

If amalgam gets contaminated with moisture, the most uncommon result is:** A. Blister formation B. Post operative pain C. Secondary caries D. Lower compressive strength

Description : If amalgam gets contaminated with moisture, the most uncommon result is:** A. Blister formation B. Post operative pain C. Secondary caries D. Lower compressive strength

Last Answer : C. Secondary caries

Caries which is close to the pulp chamber; on x rays you find ‘dens in dente’; the right treatment is: A. Zinc oxide eugenol cement and amalgam B. Pulpectomy C. Pulpotomy D. Calcium hydroxide on pulp and amalgam

Description : Caries which is close to the pulp chamber; on x rays you find ‘dens in dente’; the right treatment is: A. Zinc oxide eugenol cement and amalgam B. Pulpectomy C. Pulpotomy D. Calcium hydroxide on pulp and amalgam

Last Answer : B. Pulpectomy

Which of the following statement about the defective margins of amalgam restorations is true?+M07 A. The larger the breakdown, the greater the chance of decay. IF THERE IS MARGINAL BREAKDOWN THIS DOSNT NECESSITATE THE PRESENCE OF CARIES ALONG MARGIN So the ans is Chances are increased

Description : Which of the following statement about the defective margins of amalgam restorations is true?+M07 A. The larger the breakdown, the greater the chance of decay. IF THERE IS MARGINAL BREAKDOWN THIS DOSNT NECESSITATE THE PRESENCE OF CARIES ALONG MARGIN So the ans is Chances are increased

Last Answer : A. The larger the breakdown, the greater the chance of decay.

When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

The ”biologic width” is the distance between the A. Base of the gingival sulcus and the crest of alveolar bone B. Free gingival margin and the base of the gingival sulcus C. Free gingival margin and the alveolar bone D. Free gingival margin and the mucogingival junction E. Free gingival margin and the base of connective tissue attachment

Description : The biologic width is the distance between the A. Base of the gingival sulcus and the crest of alveolar bone B. Free gingival margin and the base of the gingival sulcus C. ... gingival margin and the mucogingival junction E. Free gingival margin and the base of connective tissue attachment

Last Answer : A. Base of the gingival sulcus and the crest of alveolar bone

The vertical incision of a mucoperiostal flap should: A. Always extend to the alveolar mucoperiostal B. Bisect the middle of gingival papillae C. Be at the right angle of the tooth

Description : The vertical incision of a mucoperiostal flap should: A. Always extend to the alveolar mucoperiostal B. Bisect the middle of gingival papillae C. Be at the right angle of the tooth

Last Answer : A. Always extend to the alveolar mucoperiostal

Where is the retentive position on teeth according to the survey line: A. Below the height of contour B. Next to gingival margins

Description : Where is the retentive position on teeth according to the survey line: A. Below the height of contour B. Next to gingival margins

Last Answer : A. Below the height of contour

A patient complains of sensitivity, on examination you find a composite filling restoring a good cavity preparation without any secondary caries; what is your next step: A. Extirpate the pulp that is obviously inflamed B. Place ZOE dressing to sedate the pulp C. Ask patient to come back in six months D. Repeat restoration

Description : A patient complains of sensitivity, on examination you find a composite filling restoring a good cavity preparation without any secondary caries; what is your next step: A. Extirpate the pulp that is obviously ... to sedate the pulp C. Ask patient to come back in six months D. Repeat restoration

Last Answer : B. Place ZOE dressing to sedate the pulp

At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Description : At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Last Answer : C. Obtuse angle

The principle cause of failure of amalgam restoration is: A. Improperly prepared amalgam B. Improper cavity preparation C. Perio involvement D. Particles of amalgam

Description : The principle cause of failure of amalgam restoration is: A. Improperly prepared amalgam B. Improper cavity preparation C. Perio involvement D. Particles of amalgam

Last Answer : B. Improper cavity preparation

At which angle to the external surface of proximal cavity walls should a class II preparation for amalgam be finished A. An acute angle B. An obtuse angle si es el cajon proximal C. A right angle D. An angle of 45°

Description : At which angle to the external surface of proximal cavity walls should a class II preparation for amalgam be finished A. An acute angle B. An obtuse angle si es el cajon proximal C. A right angle D. An angle of 45°

Last Answer : B. An obtuse angle si es el cajon proximal

The gingiva of a child is diagnosed on the basis of all of these except of: A. Contour of gingival papilla B. Sulcus depth C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred D. Tight filling of gingival collar

Description : The gingiva of a child is diagnosed on the basis of all of these except of: A. Contour of gingival papilla B. Sulcus depth C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred D. Tight filling of gingival collar

Last Answer : C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred

The normal range of gingival depth “Epithelial attachment” in healthy mouth is: A. 1-2 mm B. 0-3 mm C. 2-3 mm D. 0-5 mm

Description : The normal range of gingival depth “Epithelial attachment” in healthy mouth is: A. 1-2 mm B. 0-3 mm C. 2-3 mm D. 0-5 mm

Last Answer : C. 2-3 mm

The size of the pulp chamber within the tooth is influenced by: A. Age B. Parafunctional C. History of the tooth /abrasion, erosion, caries/ D. All of the above

Description : The size of the pulp chamber within the tooth is influenced by: A. Age B. Parafunctional C. History of the tooth /abrasion, erosion, caries/ D. All of the above

Last Answer : D. All of the above

An upper deciduous molar has a caries exposure and on X ray the corresponding 2nd permanent premolar is absent. What treatment would you do to the deciduous tooth: A. Pulpotomy B. Endodontic treatment C. Pulp capping

Description : An upper deciduous molar has a caries exposure and on X ray the corresponding 2nd permanent premolar is absent. What treatment would you do to the deciduous tooth: A. Pulpotomy B. Endodontic treatment C. Pulp capping

Last Answer : B. Endodontic treatment

Transillumination is used to detect :** A. intrinsic tooth coloration B. caries C. Pulp-stones D. Hemorrhagic pulp E. Calculus

Description : Transillumination is used to detect :** A. intrinsic tooth coloration B. caries C. Pulp-stones D. Hemorrhagic pulp E. Calculus

Last Answer : B. caries

.Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay declines by 90% to 95% B. Tooth decay declines by 45% to 55% C. Greater reduction in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Description : .Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay ... in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Last Answer : C. Greater reduction in smooth surface caries from in pit and fissures

Of all the factors that increase the resistance of teeth to dental caries, THE MOST EFFECTIVE is,** A. The general nutrition of a child during the period of tooth formation B. The intake of fluoride during the period of enamel mineralization and maturation C. Periodic topical fluoride application by dental health care following tooth eruption D. Sufficient intake of calcium and Vitamin D during the period of enamel mineralization and maturation

Description : Of all the factors that increase the resistance of teeth to dental caries, THE MOST EFFECTIVE is,** A. The general nutrition of a child during the period of tooth formation B. The ... eruption D. Sufficient intake of calcium and Vitamin D during the period of enamel mineralization and maturation

Last Answer : B. The intake of fluoride during the period of enamel mineralization and maturation

Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Description : Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Last Answer : c. Fissure of the surface of the amalgam.

The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Description : The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Last Answer : C. 1.5 mm

Subgingival plaque changes from, A. gram positive to gram negative B. gram negative to gram positive

Description : Subgingival plaque changes from, A. gram positive to gram negative B. gram negative to gram positive

Last Answer : A. gram positive to gram negative

Which one of this restorative methods will be LEAST compromised by a core, A. Amalgam B. Composite C. GIC D. Cast gold

Description : Which one of this restorative methods will be LEAST compromised by a core, A. Amalgam B. Composite C. GIC D. Cast gold

Last Answer : D. Cast gold

In a posterior vital molar with a core the best material to restore is: A. Amalgam B. Composite resin C. GIC

Description : In a posterior vital molar with a core the best material to restore is: A. Amalgam B. Composite resin C. GIC

Last Answer : A. Amalgam

High content copper amalgam . . . a. generally requires greater energy to accomplish trituration b. should be placed rapidly in large increments c. Continues to leak since the corrosion products do not form d. does not cause galvanism in oral environment e. is equally effective as conventional alloys in clinical studies

Description : High content copper amalgam . . . a. generally requires greater energy to accomplish trituration b. should be placed rapidly in large increments c. Continues to leak since the ... not cause galvanism in oral environment e. is equally effective as conventional alloys in clinical studies

Last Answer : a. generally requires greater energy to accomplish trituration

The most common cause of fracture at the isthmus of class II dental amalgam restoration is: A. Delayed expansion B. Inadequate depth at the isthmus area C. Inadequate width at the isthmus area

Description : The most common cause of fracture at the isthmus of class II dental amalgam restoration is: A. Delayed expansion B. Inadequate depth at the isthmus area C. Inadequate width at the isthmus area

Last Answer : B. Inadequate depth at the isthmus area

What is the most common fracture of Class II amalgam restorations: A. Isthmus because of insufficient depth B. Internal fracture C. Marginal ridge site

Description : What is the most common fracture of Class II amalgam restorations: A. Isthmus because of insufficient depth B. Internal fracture C. Marginal ridge site

Last Answer : A. Isthmus because of insufficient depth

An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression material is preferred? A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Description : An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression ... A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Last Answer : D. Vinyl polysiloxane

.When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Description : .When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Last Answer : A. Should not be felt flat

What effect do fissure sealants have on caries progression: A. Reduce new caries and hamper the progress of freshly established caries B. Reduce new caries and hamper the progress of existing caries

Description : What effect do fissure sealants have on caries progression: A. Reduce new caries and hamper the progress of freshly established caries B. Reduce new caries and hamper the progress of existing caries

Last Answer : B. Reduce new caries and hamper the progress of existing caries