When restoring weakened cusps with dental amalgam you should consider: A. 2mm reduction while forming a flattened surface B. 2mm reduction while following the original contour of the cusps C. 4mm reduction while forming a flattened surface D. 4mm reduction while following the original contour of the surface

When restoring weakened cusps with dental amalgam you should consider:
A. 2mm reduction while forming a flattened surface
B. 2mm reduction while following the original contour of the cusps
C. 4mm reduction while forming a flattened surface
D. 4mm reduction while following the original contour of the surface
by

1 Answer

Answer :

A. 2mm reduction while forming a flattened surface
by

Related questions

How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Description : How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Last Answer : C. 2mm

For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

Description : For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

Last Answer : A. reduce cusp by 2mm on a flat base for more resistance

In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form

Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent formation of an “overhang” D. Provide adequate physiological contour for the proximal surface E. Provide an acceptable surface texture to the proximal surface F. All of the above

Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above

Last Answer : F. All of the above

When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Description : When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Last Answer : C. When restoring with GIC base and composite lamination

An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Description : An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Last Answer : A. Palatal reduction may be of minimal thickness.

An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Description : An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Last Answer : A. Palatal reduction may be of minimal thickness

The most common cause of fracture at the isthmus of class II dental amalgam restoration is: A. Delayed expansion B. Inadequate depth at the isthmus area C. Inadequate width at the isthmus area

Description : The most common cause of fracture at the isthmus of class II dental amalgam restoration is: A. Delayed expansion B. Inadequate depth at the isthmus area C. Inadequate width at the isthmus area

Last Answer : B. Inadequate depth at the isthmus area

An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the following should be considered? a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide. b- Place calcium hydroxide directly on the exposed pulp. c- Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Description : An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the ... - Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Last Answer : a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide

8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the following should be considered? M07*********** A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis) B. Place calcium hydroxide directly on the exposed pulp C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Description : 8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the ... C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Last Answer : A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis)

The initial condylar guidance of 25 degrees was wrong and is changed to 45 degrees. What changes will you make to achieve balanced occlusion: A. Decrease incisal guidance B. Reduce cusps height C. Increase compensation curve

Description : The initial condylar guidance of 25 degrees was wrong and is changed to 45 degrees. What changes will you make to achieve balanced occlusion: A. Decrease incisal guidance B. Reduce cusps height C. Increase compensation curve

Last Answer : C. Increase compensation curve

Which of the following cusps is more prone to crack: A. Buccal of lower molars B. Lingual of lower molars C. Lingual of upper molars D. Buccal of upper molars

Description : Which of the following cusps is more prone to crack: A. Buccal of lower molars B. Lingual of lower molars C. Lingual of upper molars D. Buccal of upper molars

Last Answer : B. Lingual of lower molars

Decision to employ cusped or without cusps teeth is influenced by:** A. Reverse Overjet B. TMJ problems C. Cranio mandibular skeletal relationship

Description : Decision to employ cusped or without cusps teeth is influenced by:** A. Reverse Overjet B. TMJ problems C. Cranio mandibular skeletal relationship

Last Answer : C. Cranio mandibular skeletal relationship

Which one of the following cellular parts is correctly described? (a) Thylakoids - flattened membranous sacs forming the grana of chloroplasts (b) Centrioles - sites for active RNA synthesis (c) Ribosomes - those on chloroplasts are larger (80S) while those in the cytoplasm are smaller (70S) (d) Lysosomes - optimally active at a pH of about 8.5

Description : Which one of the following cellular parts is correctly described? (a) Thylakoids - flattened membranous sacs forming the grana of chloroplasts (b) Centrioles - sites for active RNA synthesis (c) Ribosomes - ... cytoplasm are smaller (70S) (d) Lysosomes - optimally active at a pH of about 8.5

Last Answer : (a) Thylakoids - flattened membranous sacs forming the grana of chloroplasts

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Description : Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Last Answer : c. Fissure of the surface of the amalgam.

At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Description : At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Last Answer : C. Obtuse angle

At which angle to the external surface of proximal cavity walls should a class II preparation for amalgam be finished A. An acute angle B. An obtuse angle si es el cajon proximal C. A right angle D. An angle of 45°

Description : At which angle to the external surface of proximal cavity walls should a class II preparation for amalgam be finished A. An acute angle B. An obtuse angle si es el cajon proximal C. A right angle D. An angle of 45°

Last Answer : B. An obtuse angle si es el cajon proximal

The optimum cavosurface angle for occlusal amalgam surface is: A. 45-60° B. 70-85° C. 45-80° D. 95-110° E. 130-150°

Description : The optimum cavosurface angle for occlusal amalgam surface is: A. 45-60° B. 70-85° C. 45-80° D. 95-110° E. 130-150°

Last Answer : D. 95-110°

In a vital pulp therapy, what is the optimum depth for a pin hole in a tooth: A. 4-5mm B. Approximately 2mm C. Less than 2mm D. 1-1.5mm

Description : In a vital pulp therapy, what is the optimum depth for a pin hole in a tooth: A. 4-5mm B. Approximately 2mm C. Less than 2mm D. 1-1.5mm

Last Answer : A. 4-5mm

During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

In testing for mobility, which of the following statement is true: a.Heavy pressure must sometimes be used to test mobility. b.Only lateral mobility is significant in diagnosis and treatment of chronic inflammatory periodontal disease. c.Hyper mobility indicates that the tooth supporting structure have been weakened. d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Description : In testing for mobility, which of the following statement is true: a.Heavy pressure must sometimes be used to test mobility. b.Only lateral mobility is significant in diagnosis and ... weakened. d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Last Answer : d.During the periodontal examination each tooth should be tested individually for hyper mobility.

In testing for mobility, which of the following statement is true:** M07 A. Heavy pressure must sometimes be used to test mobility B. Only lateral mobility is significant in diagnosis and treatment of chronic inflammatory periodontal disease C. Hyper mobility indicates that the tooth supporting structures have been weakened D. During the periodontal examination each tooth should be tested individually for hyper mobility E. Reliance on radiograph is essential

Description : In testing for mobility, which of the following statement is true:** M07 A. Heavy pressure must sometimes be used to test mobility B. Only lateral mobility is significant in ... examination each tooth should be tested individually for hyper mobility E. Reliance on radiograph is essential

Last Answer : D. During the periodontal examination each tooth should be tested individually for hyper mobility

The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Description : The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Last Answer : A. Perpendicular to the outer surface of the tooth

Consider the following statements: 1. Bordeaux mixture consists of sodium bromide and lime 2. Toothpastes contain calcium carbonate 3. Zinc amalgam is used in dental fillings 4. Liquid sodium is used as a coolant in nuclear reactors The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Bordeaux mixture consists of sodium bromide and lime 2. Toothpastes contain calcium carbonate 3. Zinc amalgam is used in dental fillings 4. Liquid sodium is used as a coolant in nuclear reactors The ... 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Last Answer : Ans:(c)

A patient complains of sensitivity, on examination you find a composite filling restoring a good cavity preparation without any secondary caries; what is your next step: A. Extirpate the pulp that is obviously inflamed B. Place ZOE dressing to sedate the pulp C. Ask patient to come back in six months D. Repeat restoration

Description : A patient complains of sensitivity, on examination you find a composite filling restoring a good cavity preparation without any secondary caries; what is your next step: A. Extirpate the pulp that is obviously ... to sedate the pulp C. Ask patient to come back in six months D. Repeat restoration

Last Answer : B. Place ZOE dressing to sedate the pulp

Oral mucosal pigmentation; what is TRUE: a. Commonly depends on ethnicity. b. Commonly an amalgam tattoo. c. Commonly oral melanoma. d. Commonly melanotic naevus.

Description : Oral mucosal pigmentation; what is TRUE: a. Commonly depends on ethnicity. b. Commonly an amalgam tattoo. c. Commonly oral melanoma. d. Commonly melanotic naevus.

Last Answer : a. Commonly depends on ethnicity.

Burnishing the amalgam after carving, what is the benefit? a.Completing the condensation at the marginal edges. b.eleminating excessive mercury

Description : Burnishing the amalgam after carving, what is the benefit? a.Completing the condensation at the marginal edges. b.eleminating excessive mercury

Last Answer : .Completing the condensation at the marginal edges.

What is correct in regard to high copper amalgam, A. Reacts and strengthens the amalgam by its dispersion properties B. Reacts to form copper-tin phase thereby eliminating the tin-mercury phase C. Reacts to form copper-silver phase thereby eliminating the silver mercury phase D. Reacts and strengthens the amalgam by its grain diffusion

Description : What is correct in regard to high copper amalgam, A. Reacts and strengthens the amalgam by its dispersion properties B. Reacts to form copper-tin phase thereby eliminating the tin-mercury ... thereby eliminating the silver mercury phase D. Reacts and strengthens the amalgam by its grain diffusion

Last Answer : B. Reacts to form copper-tin phase thereby eliminating the tin-mercury phase

Which one of this restorative methods will be LEAST compromised by a core, A. Amalgam B. Composite C. GIC D. Cast gold

Description : Which one of this restorative methods will be LEAST compromised by a core, A. Amalgam B. Composite C. GIC D. Cast gold

Last Answer : D. Cast gold

What is the property of high copper amalgam A. Reduced physical creep B. Higher retention

Description : What is the property of high copper amalgam A. Reduced physical creep B. Higher retention

Last Answer : A. Reduced physical creep

After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas

Description : After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas

Last Answer : A. Occlusal height

The principal reasons for placing a gingival interproximal wedge in conjunction with a matrix for amalgam condensation are to: 1. separate the teeth slightly 2. keep the band tight at the gingival margin 3. contribute to the interproximal contact of the restoration 4. retract the gingival tissue a. 1,2,3 b. 1,2,4 c. 2,3,4 d. 1,3,4 e. all of the above

Description : The principal reasons for placing a gingival interproximal wedge in conjunction with a matrix for amalgam condensation are to: 1. separate the teeth slightly 2. keep the band tight at the gingival margin 3. contribute to the ... b. 1,2,4 c. 2,3,4 d. 1,3,4 e. all of the above

Last Answer : e. all of the above

High content copper amalgam . . . a. generally requires greater energy to accomplish trituration b. should be placed rapidly in large increments c. Continues to leak since the corrosion products do not form d. does not cause galvanism in oral environment e. is equally effective as conventional alloys in clinical studies

Description : High content copper amalgam . . . a. generally requires greater energy to accomplish trituration b. should be placed rapidly in large increments c. Continues to leak since the ... not cause galvanism in oral environment e. is equally effective as conventional alloys in clinical studies

Last Answer : a. generally requires greater energy to accomplish trituration

Occasional sensitivity in a shallow class I amalgam restoration after two days would be managed by: A. Replace old filing immediately B. Oxide Zinc and eugenol C. Using thicker mix of cements D. Tell patient the discomfort will disappear after 4 t o6 weeks E. Ledermix

Description : Occasional sensitivity in a shallow class I amalgam restoration after two days would be managed by: A. Replace old filing immediately B. Oxide Zinc and eugenol C. Using thicker mix of cements D. Tell patient the discomfort will disappear after 4 t o6 weeks E. Ledermix

Last Answer : D. Tell patient the discomfort will disappear after 4 t o6 weeks

In a posterior vital molar with a core the best material to restore is: A. Amalgam B. Composite resin C. GIC

Description : In a posterior vital molar with a core the best material to restore is: A. Amalgam B. Composite resin C. GIC

Last Answer : A. Amalgam

What is TRUE about Oral mucosal pigmentation;: A. Commonly seen in ethnic groups B. Commonly an amalgam tattoo C. Commonly oral melanoma D. Commonly melanotic naevus What is TRUE about Oral mucosal pigmentation;: A. Commonly seen in ethnic groups B. Commonly an amalgam tattoo C. Commonly oral melanoma D. Commonly melanotic naevus

Description : What is TRUE about Oral mucosal pigmentation;: A. Commonly seen in ethnic groups B. Commonly an amalgam tattoo C. Commonly oral melanoma D. Commonly melanotic naevus

Last Answer : A. Commonly seen in ethnic groups

A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Description : A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Last Answer : B. Between core and cement

In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop

Description : In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop

Last Answer : A. The wider the gap the better the chance of secondary caries

The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Description : The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Last Answer : A. Just supragingival whenever is possible

Corrosion and discolouration of amalgam restorations is usually caused by: A. Sulphur oxides B. Oxygen C. Chlorides D. Over trituration

Description : Corrosion and discolouration of amalgam restorations is usually caused by: A. Sulphur oxides B. Oxygen C. Chlorides D. Over trituration

Last Answer : A. Sulphur oxides

The less mercury remaining in condensed amalgam: A. The stronger the restoration which contains fewer matrix alloys and fewer voids B. The weaker the restoration C. The more matrix alloys D. The more voids E. None of the above

Description : The less mercury remaining in condensed amalgam: A. The stronger the restoration which contains fewer matrix alloys and fewer voids B. The weaker the restoration C. The more matrix alloys D. The more voids E. None of the above

Last Answer : A. The stronger the restoration which contains fewer matrix alloys and fewer voids

Reduced occlusal area means: A. More fracture potential for amalgam B. Less fracture potential for amalgam C. Pulpal involvement D. Perio involvement E. None of the above

Description : Reduced occlusal area means: A. More fracture potential for amalgam B. Less fracture potential for amalgam C. Pulpal involvement D. Perio involvement E. None of the above

Last Answer : B. Less fracture potential for amalgam

The principle cause of failure of amalgam restoration is: A. Improperly prepared amalgam B. Improper cavity preparation C. Perio involvement D. Particles of amalgam

Description : The principle cause of failure of amalgam restoration is: A. Improperly prepared amalgam B. Improper cavity preparation C. Perio involvement D. Particles of amalgam

Last Answer : B. Improper cavity preparation

Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Last Answer : C. Buccal and lingual undercuts

High copper amalgam lasts longer than low copper amalgam because of:** A. Increased compressive strength B. Increased corrosion resistance C. High creep D. Increased tensile strength E. Decreased setting expansion

Description : High copper amalgam lasts longer than low copper amalgam because of:**  A. Increased compressive strength  B. Increased corrosion resistance  C. High creep  D. Increased tensile strength  E. Decreased setting expansion 

Last Answer : A. Increased compressive strength 

Pin Restoration with which material has the best retention: A. Amalgam B. Gold inlay C. Composite D. Glass Ionomer

Description : Pin Restoration with which material has the best retention:  A. Amalgam  B. Gold inlay  C. Composite  D. Glass Ionomer 

Last Answer : C. Composite 

If amalgam gets contaminated with moisture, the most uncommon result is:** A. Blister formation B. Post operative pain C. Secondary caries D. Lower compressive strength

Description : If amalgam gets contaminated with moisture, the most uncommon result is:** A. Blister formation B. Post operative pain C. Secondary caries D. Lower compressive strength

Last Answer : C. Secondary caries