For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

For an amalgam restoration of a weakened cusp you should,
A. reduce cusp by 2mm on a flat base for more resistance
B. reduce cusp by 2mm following the outline of the cusp
C. reduce 2mm for retention form
by

1 Answer

Answer :

A. reduce cusp by 2mm on a flat base for more resistance
by

Related questions

How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form

How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Description : How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Last Answer : C. 2mm

When restoring weakened cusps with dental amalgam you should consider: A. 2mm reduction while forming a flattened surface B. 2mm reduction while following the original contour of the cusps C. 4mm reduction while forming a flattened surface D. 4mm reduction while following the original contour of the surface

Description : When restoring weakened cusps with dental amalgam you should consider: A. 2mm reduction while forming a flattened surface B. 2mm reduction while following the original contour of the cusps C ... forming a flattened surface D. 4mm reduction while following the original contour of the surface

Last Answer : A. 2mm reduction while forming a flattened surface

Pin Restoration with which material has the best retention: A. Amalgam B. Gold inlay C. Composite D. Glass Ionomer

Description : Pin Restoration with which material has the best retention:  A. Amalgam  B. Gold inlay  C. Composite  D. Glass Ionomer 

Last Answer : C. Composite 

The retention pin in an amalgam restoration should be placed, A. Parallel to the outer wall B. Parallel to the long axis of tooth

Description : The retention pin in an amalgam restoration should be placed, A. Parallel to the outer wall B. Parallel to the long axis of tooth

Last Answer : A. Parallel to the outer wall

During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

The less mercury remaining in condensed amalgam: A. The stronger the restoration which contains fewer matrix alloys and fewer voids B. The weaker the restoration C. The more matrix alloys D. The more voids E. None of the above

Description : The less mercury remaining in condensed amalgam: A. The stronger the restoration which contains fewer matrix alloys and fewer voids B. The weaker the restoration C. The more matrix alloys D. The more voids E. None of the above

Last Answer : A. The stronger the restoration which contains fewer matrix alloys and fewer voids

Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Description : Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Last Answer : c. Fissure of the surface of the amalgam.

The principal reasons for placing a gingival interproximal wedge in conjunction with a matrix for amalgam condensation are to: 1. separate the teeth slightly 2. keep the band tight at the gingival margin 3. contribute to the interproximal contact of the restoration 4. retract the gingival tissue a. 1,2,3 b. 1,2,4 c. 2,3,4 d. 1,3,4 e. all of the above

Description : The principal reasons for placing a gingival interproximal wedge in conjunction with a matrix for amalgam condensation are to: 1. separate the teeth slightly 2. keep the band tight at the gingival margin 3. contribute to the ... b. 1,2,4 c. 2,3,4 d. 1,3,4 e. all of the above

Last Answer : e. all of the above

Occasional sensitivity in a shallow class I amalgam restoration after two days would be managed by: A. Replace old filing immediately B. Oxide Zinc and eugenol C. Using thicker mix of cements D. Tell patient the discomfort will disappear after 4 t o6 weeks E. Ledermix

Description : Occasional sensitivity in a shallow class I amalgam restoration after two days would be managed by: A. Replace old filing immediately B. Oxide Zinc and eugenol C. Using thicker mix of cements D. Tell patient the discomfort will disappear after 4 t o6 weeks E. Ledermix

Last Answer : D. Tell patient the discomfort will disappear after 4 t o6 weeks

The principle cause of failure of amalgam restoration is: A. Improperly prepared amalgam B. Improper cavity preparation C. Perio involvement D. Particles of amalgam

Description : The principle cause of failure of amalgam restoration is: A. Improperly prepared amalgam B. Improper cavity preparation C. Perio involvement D. Particles of amalgam

Last Answer : B. Improper cavity preparation

The most common cause of fracture at the isthmus of class II dental amalgam restoration is: A. Delayed expansion B. Inadequate depth at the isthmus area C. Inadequate width at the isthmus area

Description : The most common cause of fracture at the isthmus of class II dental amalgam restoration is: A. Delayed expansion B. Inadequate depth at the isthmus area C. Inadequate width at the isthmus area

Last Answer : B. Inadequate depth at the isthmus area

Which of the following restoration material’s strength is not effected by pins: A. Amalgam B. Composite resin

Description : Which of the following restoration material’s strength is not effected by pins: A. Amalgam B. Composite resin

Last Answer : B. Composite resin

When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be performed because it might damage the adjacent tooth C. When extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Description : When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be ... extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Last Answer : A. Always should be performed to minimise marginal leakage

What is the property of high copper amalgam A. Reduced physical creep B. Higher retention

Description : What is the property of high copper amalgam A. Reduced physical creep B. Higher retention

Last Answer : A. Reduced physical creep

Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Last Answer : C. Buccal and lingual undercuts

In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity

Description : In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity

Last Answer : E. Overextension of lining in cavity

The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Description : The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Last Answer : A. Just supragingival whenever is possible

When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Description : When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Last Answer : C. When restoring with GIC base and composite lamination

High copper amalgam lasts longer than low copper amalgam because of:** A. Increased compressive strength B. Increased corrosion resistance C. High creep D. Increased tensile strength E. Decreased setting expansion

Description : High copper amalgam lasts longer than low copper amalgam because of:**  A. Increased compressive strength  B. Increased corrosion resistance  C. High creep  D. Increased tensile strength  E. Decreased setting expansion 

Last Answer : A. Increased compressive strength 

If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Description : If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Last Answer : b.parallel to the nearest external surface

In complete dentures, cheek biting is most likely a result of: A. Reduced Overjet of posterior teeth B. Increased vertical dimension C. Teeth have large cusp inclines

Description : In complete dentures, cheek biting is most likely a result of: A. Reduced Overjet of posterior teeth B. Increased vertical dimension C. Teeth have large cusp inclines

Last Answer : A. Reduced Overjet of posterior teeth

The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent encroachment on the lingual pulp horn IV. Maintain dentinal support of the lingual cusp A. I and II B. I and III C. II and IV D. III and IV E. IV only

Description : The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent ... and II B. I and III C. II and IV D. III and IV E. IV only

Last Answer : C. II and IV

The palatal pulp horn of maxillary molars is located: A. In the pulpchamber under mesiolingual cusp B. In the pulpchamber opposite the mesio distal fissure of the buccal cusp C. Under the disto lingual cusp

Description : The palatal pulp horn of maxillary molars is located: A. In the pulpchamber under mesiolingual cusp B. In the pulpchamber opposite the mesio distal fissure of the buccal cusp C. Under the disto lingual cusp

Last Answer : A. In the pulpchamber under mesiolingual cusp

The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Description : The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Last Answer : B. Mesially

A cusp fracture immediate to Class II inlay can be BEST detected by, A. History B. Visually C. Radiograph D. Percussion E. Touching the tip of the cusp / Pressure on the cusp/

Description : A cusp fracture immediate to Class II inlay can be BEST detected by, A. History B. Visually C. Radiograph D. Percussion E. Touching the tip of the cusp / Pressure on the cusp/

Last Answer : E. Touching the tip of the cusp / Pressure on the cusp/

An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the following should be considered? a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide. b- Place calcium hydroxide directly on the exposed pulp. c- Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Description : An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the ... - Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Last Answer : a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide

In a vital pulp therapy, what is the optimum depth for a pin hole in a tooth: A. 4-5mm B. Approximately 2mm C. Less than 2mm D. 1-1.5mm

Description : In a vital pulp therapy, what is the optimum depth for a pin hole in a tooth: A. 4-5mm B. Approximately 2mm C. Less than 2mm D. 1-1.5mm

Last Answer : A. 4-5mm

8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the following should be considered? M07*********** A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis) B. Place calcium hydroxide directly on the exposed pulp C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Description : 8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the ... C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Last Answer : A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis)

In testing for mobility, which of the following statement is true: a.Heavy pressure must sometimes be used to test mobility. b.Only lateral mobility is significant in diagnosis and treatment of chronic inflammatory periodontal disease. c.Hyper mobility indicates that the tooth supporting structure have been weakened. d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Description : In testing for mobility, which of the following statement is true: a.Heavy pressure must sometimes be used to test mobility. b.Only lateral mobility is significant in diagnosis and ... weakened. d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Last Answer : d.During the periodontal examination each tooth should be tested individually for hyper mobility.

In testing for mobility, which of the following statement is true:** M07 A. Heavy pressure must sometimes be used to test mobility B. Only lateral mobility is significant in diagnosis and treatment of chronic inflammatory periodontal disease C. Hyper mobility indicates that the tooth supporting structures have been weakened D. During the periodontal examination each tooth should be tested individually for hyper mobility E. Reliance on radiograph is essential

Description : In testing for mobility, which of the following statement is true:** M07 A. Heavy pressure must sometimes be used to test mobility B. Only lateral mobility is significant in ... examination each tooth should be tested individually for hyper mobility E. Reliance on radiograph is essential

Last Answer : D. During the periodontal examination each tooth should be tested individually for hyper mobility

What is correct in regard to high copper amalgam, A. Reacts and strengthens the amalgam by its dispersion properties B. Reacts to form copper-tin phase thereby eliminating the tin-mercury phase C. Reacts to form copper-silver phase thereby eliminating the silver mercury phase D. Reacts and strengthens the amalgam by its grain diffusion

Description : What is correct in regard to high copper amalgam, A. Reacts and strengthens the amalgam by its dispersion properties B. Reacts to form copper-tin phase thereby eliminating the tin-mercury ... thereby eliminating the silver mercury phase D. Reacts and strengthens the amalgam by its grain diffusion

Last Answer : B. Reacts to form copper-tin phase thereby eliminating the tin-mercury phase

High content copper amalgam . . . a. generally requires greater energy to accomplish trituration b. should be placed rapidly in large increments c. Continues to leak since the corrosion products do not form d. does not cause galvanism in oral environment e. is equally effective as conventional alloys in clinical studies

Description : High content copper amalgam . . . a. generally requires greater energy to accomplish trituration b. should be placed rapidly in large increments c. Continues to leak since the ... not cause galvanism in oral environment e. is equally effective as conventional alloys in clinical studies

Last Answer : a. generally requires greater energy to accomplish trituration

If a unloaded shunt motor's field were weakened by rheostat resistance or by an open circuit, the motor would _________. A. overspeed due to reduced CEMF B. stop because of low flux C. continue to run at base speed D. slow down and overheat

Description : If a unloaded shunt motor's field were weakened by rheostat resistance or by an open circuit, the motor would _________. A. overspeed due to reduced CEMF B. stop because of low flux C. continue to run at base speed D. slow down and overheat

Last Answer : Answer: A

Two central incisors on a radiograph are showing with what looks like eye drop radiolucency. You decided to start endodontic treatment on these teeth but when you tried to open access to the root canal you find clearly closed orifices with what look like secondary dentine. What is your initial management? A. Leave as it and start a permanent restoration. B. Start systemic antibiotic C. Try to ream and file canals

Description : Two central incisors on a radiograph are showing with what looks like eye drop radiolucency. You decided to start endodontic treatment on these teeth but when you tried to open access to the root ... and start a permanent restoration. B. Start systemic antibiotic C. Try to ream and file canals

Last Answer : C. Try to ream and file canals

While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Description : While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Last Answer : B. You extend your preparation and clean it

When incrementally placing a large composite resin restoration, what effect does an air-inhibited layer on the surface of the first increment have on the bond between the first and the second increments? A. It has no effect on the bond B. It is desirable and improves the bond C. It is undesirable and should be removed

Description : When incrementally placing a large composite resin restoration, what effect does an air-inhibited layer on the surface of the first increment have on the bond between the first and the second increments? A. ... B. It is desirable and improves the bond C. It is undesirable and should be removed

Last Answer : B. It is desirable and improves the bond

A patient complains of sensitivity, on examination you find a composite filling restoring a good cavity preparation without any secondary caries; what is your next step: A. Extirpate the pulp that is obviously inflamed B. Place ZOE dressing to sedate the pulp C. Ask patient to come back in six months D. Repeat restoration

Description : A patient complains of sensitivity, on examination you find a composite filling restoring a good cavity preparation without any secondary caries; what is your next step: A. Extirpate the pulp that is obviously ... to sedate the pulp C. Ask patient to come back in six months D. Repeat restoration

Last Answer : B. Place ZOE dressing to sedate the pulp

On examination of a composite restoration you find a dark attain: A. Replace the composite B. Repair with unfilled resin C. Apply topical fluoride at the margin

Description : On examination of a composite restoration you find a dark attain: A. Replace the composite B. Repair with unfilled resin C. Apply topical fluoride at the margin

Last Answer : A. Replace the composite

On an X ray you find the cement of the previous root canal treatment is extending 1mm beyond the apex without any symptoms; what would you do: A. Remove restoration material and retreat B. Apiectomy C. Leave as is until any complications occur

Description : On an X ray you find the cement of the previous root canal treatment is extending 1mm beyond the apex without any symptoms; what would you do: A. Remove restoration material and retreat B. Apiectomy C. Leave as is until any complications occur

Last Answer : C. Leave as is until any complications occur

On an X ray you find the Gutta Percha cone extending 1mm beyond the apex without any symptoms, what would you do: A. Remove restoration material until you are able to withdraw the Gutta Percha cone B. Apiectomy C. Leave as is until any complications occur

Description : On an X ray you find the Gutta Percha cone extending 1mm beyond the apex without any symptoms, what would you do: A. Remove restoration material until you are able to withdraw the Gutta Percha cone B. Apiectomy C. Leave as is until any complications occur

Last Answer : C. Leave as is until any complications occur

Which of the following may be caused by a newly placed restoration which interferes with the occlusion A. Apical abscess B. Pulpal necrosis C. Apical periodontitist

Description : Which of the following may be caused by a newly placed restoration which interferes with the occlusion A. Apical abscess B. Pulpal necrosis C. Apical periodontitist

Last Answer : C. Apical periodontitist

Reconstructing the occlusal anatomy is based on: A. Functional factors B. Depth of restoration on a tooth C. Necessity to restore normal anatomy

Description : Reconstructing the occlusal anatomy is based on: A. Functional factors B. Depth of restoration on a tooth C. Necessity to restore normal anatomy

Last Answer : A. Functional factors

Reduced occlusal area means: A. More fracture potential for amalgam B. Less fracture potential for amalgam C. Pulpal involvement D. Perio involvement E. None of the above

Description : Reduced occlusal area means: A. More fracture potential for amalgam B. Less fracture potential for amalgam C. Pulpal involvement D. Perio involvement E. None of the above

Last Answer : B. Less fracture potential for amalgam

Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in each other in the molten state. C. Amalgam is an alloy of two or more metals, one of them is mercury D. Amalgam is a metallic substance in powder or tablet from that is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Description : Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in ... is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Last Answer : C. Amalgam is an alloy of two or more metals, one of them is mercury

To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in addition to the direction of individual root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Description : To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in ... root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Last Answer : B. The age and shape of pulp chamber; in addition to the direction of individual root canals.

Oral mucosal pigmentation; what is TRUE: a. Commonly depends on ethnicity. b. Commonly an amalgam tattoo. c. Commonly oral melanoma. d. Commonly melanotic naevus.

Description : Oral mucosal pigmentation; what is TRUE: a. Commonly depends on ethnicity. b. Commonly an amalgam tattoo. c. Commonly oral melanoma. d. Commonly melanotic naevus.

Last Answer : a. Commonly depends on ethnicity.

Burnishing the amalgam after carving, what is the benefit? a.Completing the condensation at the marginal edges. b.eleminating excessive mercury

Description : Burnishing the amalgam after carving, what is the benefit? a.Completing the condensation at the marginal edges. b.eleminating excessive mercury

Last Answer : .Completing the condensation at the marginal edges.

Which one of this restorative methods will be LEAST compromised by a core, A. Amalgam B. Composite C. GIC D. Cast gold

Description : Which one of this restorative methods will be LEAST compromised by a core, A. Amalgam B. Composite C. GIC D. Cast gold

Last Answer : D. Cast gold