In a vital pulp therapy, what is the optimum depth for a pin hole in a tooth:
A. 4-5mm
B. Approximately 2mm
C. Less than 2mm
D. 1-1.5mm

1 Answer

Answer :

A. 4-5mm

Related questions

Description : A seven years-old boy fell off his bicycle 2 weeks ago and broke his maxillary central incisor. The pulp horn is visible as a pin point. The tooth is vital. Your treatment will be: A. Pulpectomy B. Place calcium hydroxide and fill with composite resin C. Calcium hydroxide pulpotomy

Last Answer : C. Calcium hydroxide pulpotomy

Description : How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Last Answer : C. 2mm

Description : What contraindicates pulp capping: A. Accidental exposure on vital young molars B. When inflammation of radicular pulp is already present C. When roots are greatly curved and tortuous D. When anterior tooth is vital and immature with wide open apices E. None of the above

Last Answer : B. When inflammation of radicular pulp is already present

Description : A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Last Answer : B. Between core and cement

Description : An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the ... - Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Last Answer : a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide

Description : 8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the ... C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Last Answer : A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis)

Description : Treatment of gangrenous tooth: A. Pulp capping B. Root canal therapy C. Pulpotomy

Last Answer : B. Root canal therapy

Description : The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Last Answer : B. 50%

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

Description : An endodontic therapy was completed on a tooth with a periapical radiolucency. Marked reduction in size of radiolucency is expected in approximately: A. One year B. 6 months C. 3 months

Last Answer : A. One year

Description : The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Last Answer : C. 1.5 mm

Description : A patient suffers a blow to his maxillary central incisor without resulting in fracture. The pulp may: A. Show immediate necrosis B. Become non-vital but only if treatment is delayed too long C. Become non vital irrespective of treatment D. No changes are seen later if fracture does not occur

Last Answer : C. Become non vital irrespective of treatment

Description : To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in ... root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Last Answer : B. The age and shape of pulp chamber; in addition to the direction of individual root canals.

Description : Optimum penetration of a .024 or .031 inch self-threading pin in dentin is . . . a. 0.5 mm b. 1.0 mm c. 2.0 mm d. 2.5 mm e. 3.0 mm

Last Answer : c. 2.0 mm

Description : Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Last Answer : c. Fissure of the surface of the amalgam.

Description : What is contraindicated to the use of calcium hydroxide for pulp capping: A. Accidental exposure of pulp B. Carious exposure of pulp in otherwise asymptomatic tooth C. Carious exposure of pulp in tooth that has been painful for weeks

Last Answer : C. Carious exposure of pulp in tooth that has been painful for weeks

Description : The size of the pulp chamber within the tooth is influenced by: A. Age B. Parafunctional C. History of the tooth /abrasion, erosion, caries/ D. All of the above

Last Answer : D. All of the above

Description : Where does the bone resorption show in a pulp necrosis of a deciduous molar:  A. At the root apex  B. At the bifurcation  C. On the buccal side of the tooth  D. On the lingual side of the tooth 

Last Answer : B. At the bifurcation 

Description : An upper deciduous molar has a caries exposure and on X ray the corresponding 2nd permanent premolar is absent. What treatment would you do to the deciduous tooth: A. Pulpotomy B. Endodontic treatment C. Pulp capping

Last Answer : B. Endodontic treatment

Description : Tooth under occlusal trauma may show: A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation E. All of the above

Last Answer : E. All of the above

Description : After replantation of an avulsed tooth 2 ½ hours after incident; the most likely diagnosis is, A. External resorption B. Internal resorption C. Pulp stones

Last Answer : A. External resorption

Description : Transillumination is used to detect :** A. intrinsic tooth coloration B. caries C. Pulp-stones D. Hemorrhagic pulp E. Calculus

Last Answer : B. caries

Description : .In which situation is the translucency of a tooth lost:CHECK A. Death of the pulp B. Complete calcification of pulp chamber C. Hyperaemia D. Pulp stone E. All of the above

Last Answer : E. All of the above

Description : When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be ... extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Last Answer : A. Always should be performed to minimise marginal leakage

Description : A tooth under occlusal trauma shows A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation Vertical defects occur adjacent to a tooth and usually in the form of a triangular area of missing bone, known as triangulation E. All of the above

Last Answer : E. All of the above

Description : the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio-Lingual in upper first molars B. Mesio-Buccal in ... first molars D. Mesio-Lingual in lower first molars E. Mesio- Buccal in lower first molar

Last Answer : B. Mesio–Buccal in upper first molars

Description : A healthy 6 years-old child presents with carious maxillary second primary molar with a necrotic pulp. Which treatment would be preferred? A. Extraction B. Indirect pulp treatment C. ... normal exfoliation) D. Pulpectomy to preserve the tooth as a space manteiner. E. Antibiotic coverage

Last Answer : D. Pulpectomy to preserve the tooth as a space manteiner.

Description : What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Last Answer : A. Obtain baseline response

Description : Following trauma to tooth, the next day there was no response to pulp tests you should?* A. Review again later B. Start endodontic treatment C. Extraction of tooth

Last Answer : A. Review again later

Description : A 10 years-old boy presents with a non-vital, non-mobile tooth. Treatment is: A. Pulpectomy with calcium hydroxide B. Pulpectomy with Zinc oxide eugenol C. Pulpotomy with formocresol D. No treatment is required if tooth is asymptomatic

Last Answer : A. Pulpectomy with calcium hydroxide

Description : A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with ... small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Last Answer : C. Several small mixes, sequentially triturated

Description : A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Last Answer : b. 3.14 mm

Description : In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Last Answer : (i) +0.5mm, -0 mm in vertical *

Description : The OPTIMUM crown to root ratio for abutment tooth is:** A. 2:3 B. 1:1

Last Answer : A. 2:3

Description : .Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay ... in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Last Answer : C. Greater reduction in smooth surface caries from in pit and fissures

Description : The retention pin in an amalgam restoration should be placed, A. Parallel to the outer wall B. Parallel to the long axis of tooth

Last Answer : A. Parallel to the outer wall

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form

Description : When restoring weakened cusps with dental amalgam you should consider: A. 2mm reduction while forming a flattened surface B. 2mm reduction while following the original contour of the cusps C ... forming a flattened surface D. 4mm reduction while following the original contour of the surface

Last Answer : A. 2mm reduction while forming a flattened surface

Description : For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

Last Answer : A. reduce cusp by 2mm on a flat base for more resistance

Description : The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Last Answer : A. Just supragingival whenever is possible

Description : Reconstructing the occlusal anatomy is based on: A. Functional factors B. Depth of restoration on a tooth C. Necessity to restore normal anatomy

Last Answer : A. Functional factors

Description : What is the minimal labial reduction for porcelain metal crowns: A. 1mm B. 1.5mm C. 0.5mm

Last Answer : B. 1.5mm

Description : The width of the normal periodontal ligament space is: A. 0.25 to 0.5mm B. 1mm

Last Answer : A. 0.25 to 0.5mm

Description : When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Last Answer : D. Wrought gold

Description : A patient on the dental chair has cardiac arrest. What is INCORRECT, A. Observing the vital signs and check that the air way is clear is at high importance B. Expired air has 15% O2 only, ... D. Intermittent positive pressure is better than mouth to mouth when it has been given at the same rate.

Last Answer : C. Intermittent positive pressure at the rate of 40/min will reduce the chances of cerebral hypoxia

Description : An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Last Answer : A. Palatal reduction may be of minimal thickness.

Description : An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Last Answer : A. Palatal reduction may be of minimal thickness

Description : Patient reported to you 30 min after trauma to central incisor. Patient is 10 yrs old and there is traumatic exposure of pulp. What will be the line of treatment- 1) coronal pulpotomy and Ca-hydr. ... 3) 1-2 mm. of coronal pulp extirpated and Ca hydroxide and then permanent filling 4) Pulpectomy

Last Answer : 3) 1-2 mm. of coronal pulp extirpated and Ca hydroxide and then permanent filling