The MAIN purpose of burnishing is: A. To help eliminating excess mercury (condensing) B. To condense margins C. Polishing of filling

The MAIN purpose of burnishing is:
A. To help eliminating excess mercury (condensing)
B. To condense margins
C. Polishing of filling
by

1 Answer

Answer :

B. To condense margins
by

Related questions

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

Burnishing the amalgam after carving, what is the benefit? a.Completing the condensation at the marginal edges. b.eleminating excessive mercury

Description : Burnishing the amalgam after carving, what is the benefit? a.Completing the condensation at the marginal edges. b.eleminating excessive mercury

Last Answer : .Completing the condensation at the marginal edges.

What is correct in regard to high copper amalgam, A. Reacts and strengthens the amalgam by its dispersion properties B. Reacts to form copper-tin phase thereby eliminating the tin-mercury phase C. Reacts to form copper-silver phase thereby eliminating the silver mercury phase D. Reacts and strengthens the amalgam by its grain diffusion

Description : What is correct in regard to high copper amalgam, A. Reacts and strengthens the amalgam by its dispersion properties B. Reacts to form copper-tin phase thereby eliminating the tin-mercury ... thereby eliminating the silver mercury phase D. Reacts and strengthens the amalgam by its grain diffusion

Last Answer : B. Reacts to form copper-tin phase thereby eliminating the tin-mercury phase

A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Description : A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Last Answer : B. Take a new impression and make new crown

When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

A physician refers a nine years-old boy to you to confirm diagnosis. The boy has a fever of 40°C and coughing. When you focus your light into his eyes he turns away. Intra-orally there are white spots surrounded by red margins. The disease and lesions are: A. Measles and Koplik’s spots B. AHGS vesicles

Description : A physician refers a nine years-old boy to you to confirm diagnosis. The boy has a fever of 40°C and coughing. When you focus your light into his eyes he turns away. Intra-orally there are white ... by red margins. The disease and lesions are: A. Measles and Koplik's spots B. AHGS vesicles

Last Answer : A. Measles and Koplik’s spots

A patient is complaining of an open sore on the buccal mucosa. The lesion is painless, ulcerated, has indurated margins, 1.5 cm in diameter, covered by greyish-white exudate, enlarged lymph nodes and tender, negative tuberculin test and positive serology. The diagnosis is

Description : A patient is complaining of an open sore on the buccal mucosa. The lesion is painless, ulcerated, has  indurated margins, 1.5 cm in diameter, covered by greyish-white exudate, enlarged lymph nodes  and tender, negative tuberculin test and positive serology. The diagnosis is

Last Answer : Chancre /Primary lesion of syphilis 

Where is the retentive position on teeth according to the survey line: A. Below the height of contour B. Next to gingival margins

Description : Where is the retentive position on teeth according to the survey line: A. Below the height of contour B. Next to gingival margins

Last Answer : A. Below the height of contour

A major difference between light cured and chemical cured composite is that during setting or in function the light cured material tends to:******** VERY IMP A. Seal the margins better and completely B. Exhibit less wear on time C. Undergo greater colour change D. Shrink more rapidly E. Posses greater fracture toughness

Description : A major difference between light cured and chemical cured composite is that during setting or in function the light cured material tends to:******** VERY IMP A. Seal the margins better and ... on time C. Undergo greater colour change D. Shrink more rapidly E. Posses greater fracture toughness

Last Answer : D. Shrink more rapidly

Which of the following statement about the defective margins of amalgam restorations is true?+M07 A. The larger the breakdown, the greater the chance of decay. IF THERE IS MARGINAL BREAKDOWN THIS DOSNT NECESSITATE THE PRESENCE OF CARIES ALONG MARGIN So the ans is Chances are increased

Description : Which of the following statement about the defective margins of amalgam restorations is true?+M07 A. The larger the breakdown, the greater the chance of decay. IF THERE IS MARGINAL BREAKDOWN THIS DOSNT NECESSITATE THE PRESENCE OF CARIES ALONG MARGIN So the ans is Chances are increased

Last Answer : A. The larger the breakdown, the greater the chance of decay.

Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Description : Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Last Answer : (C) Remove condensate and inert gases

The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the windings when the machine is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Description : The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the ... is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Last Answer : Answer: B

The main purpose of an electric space heater installed in a large AC generator is to _____________. A. prevent the windings from becoming brittle B. prevent moisture from condensing in the windings during shutdown C. prevent acidic pitting of the slip rings D. keep the lube oil warm for quick starting

Description : The main purpose of an electric space heater installed in a large AC generator is to _____________. A. prevent the windings from becoming brittle B. prevent moisture from condensing in the windings during ... C. prevent acidic pitting of the slip rings D. keep the lube oil warm for quick starting

Last Answer : Answer: B

Patient reported to you 30 min after trauma to central incisor. Patient is 10 yrs old and there is traumatic exposure of pulp. What will be the line of treatment— 1) coronal pulpotomy and Ca-hydr. Base and then permanent filling 2) Ca-hydroxide base and permanent filling 3) 1-2 mm. of coronal pulp extirpated and Ca hydroxide and then permanent filling 4) Pulpectomy

Description : Patient reported to you 30 min after trauma to central incisor. Patient is 10 yrs old and there is traumatic exposure of pulp. What will be the line of treatment- 1) coronal pulpotomy and Ca-hydr. ... 3) 1-2 mm. of coronal pulp extirpated and Ca hydroxide and then permanent filling 4) Pulpectomy

Last Answer : 3) 1-2 mm. of coronal pulp extirpated and Ca hydroxide and then permanent filling

Patient has hot and cold sensation and pain on percussion after the filling of class III Cavity with GIC base and composite. What will be possible cause – 1) bacterial microleakage 2) mechanical trauma of cavity cutting 3) Exothermic reaction while setting GIC

Description : Patient has hot and cold sensation and pain on percussion after the filling of class III Cavity with GIC base and composite. What will be possible cause – 1) bacterial microleakage 2) mechanical trauma of cavity cutting 3) Exothermic reaction while setting GIC

Last Answer : 2) mechanical trauma of cavity cutting

An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the following should be considered? a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide. b- Place calcium hydroxide directly on the exposed pulp. c- Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Description : An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the ... - Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Last Answer : a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide

A female patient comes to you complaining of persistent pain in a heavily restored central incisor; you suspect pulpitis and you have been told that she is in transit leaving by plane next day. Your treatment will be, A. Remove filling and place a sedative dressings B. Pulp extirpation and obturate with Ledermix dressings C. Prescribe analgesics and systemic antibiotic

Description : A female patient comes to you complaining of persistent pain in a heavily restored central incisor; you suspect pulpitis and you have been told that she is in transit leaving by plane ... B. Pulp extirpation and obturate with Ledermix dressings C. Prescribe analgesics and systemic antibiotic

Last Answer : B. Pulp extirpation and obturate with Ledermix dressings

A patient complains of sensitivity, on examination you find a composite filling restoring a good cavity preparation without any secondary caries; what is your next step: A. Extirpate the pulp that is obviously inflamed B. Place ZOE dressing to sedate the pulp C. Ask patient to come back in six months D. Repeat restoration

Description : A patient complains of sensitivity, on examination you find a composite filling restoring a good cavity preparation without any secondary caries; what is your next step: A. Extirpate the pulp that is obviously ... to sedate the pulp C. Ask patient to come back in six months D. Repeat restoration

Last Answer : B. Place ZOE dressing to sedate the pulp

How long would it take to notice significant reduction in radiolucency after finishing a root filling in a tooth with a periapical lesion: A. 6 months B. 1 month C. 3 months

Description : How long would it take to notice significant reduction in radiolucency after finishing a root filling in a tooth with a periapical lesion: A. 6 months B. 1 month C. 3 months

Last Answer : A. 6 months

At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Description : At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Last Answer : C. Obtuse angle

X rays are used in endodontic treatment to: A. Aid in the diagnosis of periapical hard tissue lesion B. Determine the number, location, shape, size and direction of roots and root canals C. Confirm the length of root canals D. Evaluate the adequacy of the complete root canal filling E. All of the above

Description : X rays are used in endodontic treatment to: A. Aid in the diagnosis of periapical hard tissue lesion B. Determine the number, location, shape, size and direction of roots and root canals C. Confirm ... root canals D. Evaluate the adequacy of the complete root canal filling E. All of the above

Last Answer : E. All of the above

What indicates for a periapical surgery: A. Where performing an endodontic treatment on existing root canal filling may lead to fracture of the root B. When root canal treatment is faulty C. When there is danger of involving other structures D. When the bony defect is so extensive that the edges of the incisors will collapse E. None of the above

Description : What indicates for a periapical surgery: A. Where performing an endodontic treatment on existing root canal filling may lead to fracture of the root B. When root canal treatment is faulty C. When ... bony defect is so extensive that the edges of the incisors will collapse E. None of the above

Last Answer : A. Where performing an endodontic treatment on existing root canal filling may lead to fracture of the root

In RCT the ideal root filling: A. Ends at the apex B. Extends beyond apex to achieve a good seal C. Ends at the dentino-cemental junction

Description : In RCT the ideal root filling: A. Ends at the apex B. Extends beyond apex to achieve a good seal C. Ends at the dentino-cemental junction

Last Answer : C. Ends at the dentino-cemental junction

Why can Class IV gold not be used in cavity as a filling material: A. Can not be polished “burnished” B. The corrosive properties

Description : Why can Class IV gold not be used in cavity as a filling material: A. Can not be polished “burnished” B. The corrosive properties

Last Answer : A. Can not be polished “burnished”

.The most resistant filling materials to fill class IV cavities are: A. Resins with silicone dioxide (SiO2) B. Resins with glass or quartz C. Silico-phosphate D. Silicates

Description : .The most resistant filling materials to fill class IV cavities are: A. Resins with silicone dioxide (SiO2) B. Resins with glass or quartz C. Silico-phosphate D. Silicates

Last Answer : B. Resins with glass or quartz

.In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. A higher coefficient of thermal expansion and a lower crashing strength C. A lower coefficient of thermal expansion and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Description : .In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. ... and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Last Answer : B. A higher coefficient of thermal expansion and a lower crashing strength

The gingiva of a child is diagnosed on the basis of all of these except of: A. Contour of gingival papilla B. Sulcus depth C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred D. Tight filling of gingival collar

Description : The gingiva of a child is diagnosed on the basis of all of these except of: A. Contour of gingival papilla B. Sulcus depth C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred D. Tight filling of gingival collar

Last Answer : C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred

8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the following should be considered? M07*********** A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis) B. Place calcium hydroxide directly on the exposed pulp C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Description : 8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the ... C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Last Answer : A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis)

Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly

Description : Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly

Last Answer : A. Clean with pumice, rubber cup, water and weak acid

The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Description : The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Last Answer : Answer: D

The main purpose of periodontal treatment is, A. Elimination of plaque and calculus B. Elimination of periodontal pockets C. Reformation of all the periodontal ligaments D. The elimination of all occlusal trauma

Description : The main purpose of periodontal treatment is, A. Elimination of plaque and calculus B. Elimination of periodontal pockets C. Reformation of all the periodontal ligaments D. The elimination of all occlusal trauma

Last Answer : A. Elimination of plaque and calculus

What is the main purpose of using corticosteroids in pulpal obturation material? A. For their antibiotic action B. For their antiinflammatory action C. To relief pulp pressure

Description : What is the main purpose of using corticosteroids in pulpal obturation material? A. For their antibiotic action B. For their antiinflammatory action C. To relief pulp pressure

Last Answer : B. For their antiinflammatory action

The main purpose of finishing the enamel walls is, A. Remove loose enamel rods B. Provide a better surface for the adoption of restorative material The main purpose of finishing the enamel walls is, A. Remove loose enamel rods B. Provide a better surface for the adoption of restorative material

Description : The main purpose of finishing the enamel walls is, A. Remove loose enamel rods B. Provide a better surface for the adoption of restorative material

Last Answer : A. Remove loose enamel rods

What is the main purpose of using corticosteroids in pulpal obturation material: A. For their antibiotic action B. For their antiinflammatory action C. To relief pulp pressure

Description : What is the main purpose of using corticosteroids in pulpal obturation material: A. For their antibiotic action B. For their antiinflammatory action C. To relief pulp pressure

Last Answer : B. For their antiinflammatory action

What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Description : What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Last Answer : C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Description : What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Last Answer : A. Obtain baseline response

The less mercury remaining in condensed amalgam: A. The stronger the restoration which contains fewer matrix alloys and fewer voids B. The weaker the restoration C. The more matrix alloys D. The more voids E. None of the above

Description : The less mercury remaining in condensed amalgam: A. The stronger the restoration which contains fewer matrix alloys and fewer voids B. The weaker the restoration C. The more matrix alloys D. The more voids E. None of the above

Last Answer : A. The stronger the restoration which contains fewer matrix alloys and fewer voids

Mercury is dangerous when it turns into vapour form because of, A. It is accumulative and causes liver poison B. It is accumulative and causes kidney poison C. It induces neoplasia in the liver D. It is accumulative and causes brain poison E. It induces neoplasia in the brain

Description : Mercury is dangerous when it turns into vapour form because of, A. It is accumulative and causes liver poison B. It is accumulative and causes kidney poison C. It induces neoplasia in the liver D. It is accumulative and causes brain poison E. It induces neoplasia in the brain

Last Answer : D. It is accumulative and causes brain poison

Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in each other in the molten state. C. Amalgam is an alloy of two or more metals, one of them is mercury D. Amalgam is a metallic substance in powder or tablet from that is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Description : Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in ... is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Last Answer : C. Amalgam is an alloy of two or more metals, one of them is mercury

A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with extra mercury to give easier manipulative qualities C. Several small mixes, sequentially triturated D. Several small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Description : A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with ... small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Last Answer : C. Several small mixes, sequentially triturated

Which of the following methods should be used to dress the face of silver-plated contacts? A. Filing B. Burnishing C. Sanding with 0000 sandpaper D. All of the above are correct.

Description : Which of the following methods should be used to dress the face of silver-plated contacts? A. Filing B. Burnishing C. Sanding with 0000 sandpaper D. All of the above are correct.

Last Answer : Answer: C

-The method used to induce a layer of residual compressive stress on the surface of the spring wire, is (A) shot peening (B) burnishing (C) lapping (D) none of the above

Description : -The method used to induce a layer of residual compressive stress on the surface of the spring wire, is (A) shot peening (B) burnishing (C) lapping (D) none of the above

Last Answer : (A) shot peening

Give application of lapping, honing, buffing and burnishing.

Description : Give application of lapping, honing, buffing and burnishing.

Last Answer : Applications of Lapping: Press work dies, Moulding dies, Limit gauges, Surface plates, Engine valve and valve seat, Races of ball and roller bearings, Gears, Piston rings, Slip gauges, ... the surface. Burnishing components are Cam & followers, matting parts of engine, aesthetical components etc.

Polishing silver without silver polish?

Description : Polishing silver without silver polish?

Last Answer : answer:it’s here I’ve tried it and it does work!

Why diatoms are used in filtration and polishing?

Description : Why diatoms are used in filtration and polishing?

Last Answer : Why diatoms are used in filtration and polishing?

The luster of a metal is due to - (1) high polishing (2) high density (3) chemical inertness (4) presence of free electrons

Description : The luster of a metal is due to - (1) high polishing (2) high density (3) chemical inertness (4) presence of free electrons

Last Answer : (4) presence of free electrons Explanation: Lustre or luster is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the Latin lux, meaning "light", and generally implies radiance, gloss, or brilliance.

The vitamin present in rice polishing is?

Description : The vitamin present in rice polishing is?

Last Answer : Vitamin B2 RADIO ACTIVITY

Explain electro polishing.

Description : Explain electro polishing.

Last Answer : The article to be electro polished is taken as anode in the electrolytic bath with copper or lead cathode and a suitable electrolyte. When direct current is passed through the electrolyte, the ... the anode is electro polished. Ex: Sandwiched cookers are manufactured by the electro polishing method.

What is electro polishing?

Description : What is electro polishing?

Last Answer : Electro polishing is an electrochemical process that removes material from a metallic article. It is the reverse of electroplating.

Pollution by particulate matter emission in the atmosphere does not take place during metal (A) Grinding (B) Machining(C) Cutting(D) Polishing

Description : Pollution by particulate matter emission in the atmosphere does not take place during metal (A) Grinding (B) Machining (C) Cutting (D) Polishing

Last Answer : (D) Polishing