Titanium is used in dentistry A. In a very pure form in implants B. In an alloy with aluminium in casting for crowns and bridges C. In an alloy with nickel in orthodontic wires D. A and B E. A, B and C

Titanium is used in dentistry
A. In a very pure form in implants
B. In an alloy with aluminium in casting for crowns and bridges
C. In an alloy with nickel in orthodontic wires
D. A and B
E. A, B and C
by

1 Answer

Answer :

E. A, B and C
by

Related questions

hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?

Description : hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?

Last Answer : You would need to go to a dental school and get certfied as a technition.

Which of the following Gold casting alloys are available: A. Medium alloy “Type II” B. ard alloy “Type III” C. Extra ard alloy “Type IV” D. All of the above

Description : Which of the following Gold casting alloys are available: A. Medium alloy “Type II” B. ard alloy “Type III” C. Extra ard alloy “Type IV” D. All of the above

Last Answer : D. All of the above

.In regard to Gold casting alloys which one is available for bridge A. Hard alloy “Type IV B. Type II

Description : .In regard to Gold casting alloys which one is available for bridge A. Hard alloy “Type IV B. Type II

Last Answer : A. Hard alloy “Type IV

Denture stomatitis is commonly associated with, A. The continuous wearing of removable orthodontic appliances in otherwise healthy patient B. The proliferation of hypertrophic tissue at the denture periphery C. The overgrowth of some constituents of oral normal microflora D. Allergy to denture base material

Description : Denture stomatitis is commonly associated with, A. The continuous wearing of removable orthodontic appliances in otherwise healthy patient B. The proliferation of hypertrophic tissue at the denture ... overgrowth of some constituents of oral normal microflora D. Allergy to denture base material

Last Answer : C. The overgrowth of some constituents of oral normal microflora

A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no other pathology. What is your management: A. Remove the dentigerous cyst B. Soft tissues recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Description : A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no ... recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Last Answer : C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

What is TRUE about Benzodiazepine and diazepam in 5-10mg oral dose used for oral sedation in dentistry: A. Good analgesic effect if given 1 hour prior to dental sessions B. Would be reversed by flumazepil because it is a Benzodiazepam C. Post operative headache D. There is a profound amnesic action and no side affects

Description : What is TRUE about Benzodiazepine and diazepam in 5-10mg oral dose used for oral sedation in dentistry: A. Good analgesic effect if given 1 hour prior to dental sessions B. Would be reversed ... Benzodiazepam C. Post operative headache D. There is a profound amnesic action and no side affects

Last Answer : B. Would be reversed by flumazepil because it is a Benzodiazepam

The most common cause of porosity in porcelain jacket crowns is, A. Moisture contamination B. Excessive firing temperature C. Failure to anneal the platinum matrix D. Excessive condensation of the porcelain E. Inadequate condensation of the porcelain

Description : The most common cause of porosity in porcelain jacket crowns is, A. Moisture contamination B. Excessive firing temperature C. Failure to anneal the platinum matrix D. Excessive condensation of the porcelain E. Inadequate condensation of the porcelain

Last Answer : E. Inadequate condensation of the porcelain

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

Gemination is: a. Division of single tooth, twining. b. Fusion of two or more crowns of teeth c. Fusion of two or more roots.

Description : Gemination is: a. Division of single tooth, twining. b. Fusion of two or more crowns of teeth c. Fusion of two or more roots.

Last Answer : a. Division of single tooth, twining.

An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Description : An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Last Answer : A. Palatal reduction may be of minimal thickness.

What is the minimal labial reduction for porcelain metal crowns: A. 1mm B. 1.5mm C. 0.5mm

Description : What is the minimal labial reduction for porcelain metal crowns: A. 1mm B. 1.5mm C. 0.5mm

Last Answer : B. 1.5mm

Gemination is:** A. Division of single tooth, twining B. Fusion of two or more crowns of teeth C. Fusion of two or more roots

Description : Gemination is:** A. Division of single tooth, twining B. Fusion of two or more crowns of teeth C. Fusion of two or more roots

Last Answer : A. Division of single tooth, twining

Which is correct in regard to shade selection of crowns: A. It should be selected before starting preparation B. Chroma is the lightness/darkness of colours C. Value is the colour itself D. Hue is the concentration of colours

Description : Which is correct in regard to shade selection of crowns: A. It should be selected before starting preparation B. Chroma is the lightness/darkness of colours C. Value is the colour itself D. Hue is the concentration of colours

Last Answer : A. It should be selected before starting preparation

An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Description : An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Last Answer : A. Palatal reduction may be of minimal thickness

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

German silver used for making utensils is an alloy of – (1) Copper, silver, nickel (2) Copper, zinc, nickel (3) copper, zinc, aluminium (4) copper, nickel, aluminium

Description : German silver used for making utensils is an alloy of – (1) Copper, silver, nickel (2) Copper, zinc, nickel (3) copper, zinc, aluminium (4) copper, nickel, aluminium

Last Answer : (2) Copper, zinc, nickel Explanation: Nickel silver, also known as German silver, Argentan, new silver, nickel brass, albata, alpacca, or electrum, is a copper alloy with nickel and often ... to its development by 19th-century German metalworkers in imitation of the Chinese alloy known as paktong.

German silver is an alloy of - (1) copper, nickel and silver (2) silver, copper and aluminium (3) zinc, copper and nickel (4) silver, zinc and copper

Description : German silver is an alloy of - (1) copper, nickel and silver (2) silver, copper and aluminium (3) zinc, copper and nickel (4) silver, zinc and copper

Last Answer : (3) zinc, copper and nickel Explanation: German silver is a copper alloy with nickel and often zinc. The usual formulation is 60% copper, 20% nickel and 20% zinc.

German silver is an alloy of – (1) copper, nickel and silver (2) silver, copper and aluminium (3) zinc, copper and nickel (4) zinc, silver and copper

Description : German silver is an alloy of – (1) copper, nickel and silver (2) silver, copper and aluminium (3) zinc, copper and nickel (4) zinc, silver and copper

Last Answer : (3) zinc, copper and nickel Explanation: Nickel silver, also known as German silver, Argentan, new silver, nickel brass, albata, alpacca, or electrum, is a copper alloy with nickel and often ... . Nickel silver is named for its silvery appearance, but it contains no elemental silver unless plated.

A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Last Answer : (2) an alloy of tin and lead Explanation: Electric fuse wire is an alloy made of tin (63 % lead 37 %. The cross sectional area determines the melting point at a certain current. Alloys (e.g. ... resulting combination of good conductivity (due to the tin) with a low melting point due to the lead).

German silver in an alloy of (A) Copper, nickel and zinc (B) Copper, aluminium and silver (C) Silver, zinc and aluminium (D) Silver, nickel and zinc

Description : German silver in an alloy of (A) Copper, nickel and zinc (B) Copper, aluminium and silver (C) Silver, zinc and aluminium (D) Silver, nickel and zinc

Last Answer : (A) Copper, nickel and zinc

Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Description : Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Last Answer : (A) Aluminium, copper and manganese

Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Description : Chromel (Nichrome) is an alloy of (A) Chromium and molybdenum (B) Nickel and chromium (C) Molybdenum and nickel (D) Chromium and aluminium

Last Answer : (B) Nickel and chromium

Monel metal is an alloy of (A) Molybdenum and nickel (B) Nickel and copper (C) Molybdenum and aluminium (D) Molybdenum and zinc

Description : Monel metal is an alloy of (A) Molybdenum and nickel (B) Nickel and copper (C) Molybdenum and aluminium (D) Molybdenum and zinc

Last Answer : (B) Nickel and copper

Manganin is an alloy of (A) copper, manganese and nickel. (B) copper and manganese. (C) manganese and nickel. (D) manganese, aluminium and nickel.

Description : Manganin is an alloy of (A) copper, manganese and nickel. (B) copper and manganese. (C) manganese and nickel. (D) manganese, aluminium and nickel.

Last Answer : (A) copper, manganese and nickel.

German silver used for making utensils is an alloy of (1) copper, silver, nickel (2) copper, zinc, nickel (3) copper, zinc, aluminium (4) copper, nickel, aluminium

Description : German silver used for making utensils is an alloy of (1) copper, silver, nickel (2) copper, zinc, nickel (3) copper, zinc, aluminium (4) copper, nickel, aluminium

Last Answer : copper, zinc, nickel

German silver is an alloy of (1) copper, nickel and silver (2) silver, copper and aluminium (3) zinc, copper and nickel (4) zinc, silver and copper

Description : German silver is an alloy of (1) copper, nickel and silver (2) silver, copper and aluminium (3) zinc, copper and nickel (4) zinc, silver and copper

Last Answer : zinc, copper and nickel

A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Last Answer : an alloy of tin and lead

I craft crowns of gold and bridges of silver. Who am I? -Riddles

Description : I craft crowns of gold and bridges of silver. Who am I? -Riddles

Last Answer : A dentist!

I dig out tiny caves and store gold and silver in them. I also build bridges of silver and make crowns of gold. They are the smallest you could imagine. Sooner or later everybody needs my help, yet many people are afraid to let me help them. Who am I? -Riddles

Description : I dig out tiny caves and store gold and silver in them. I also build bridges of silver and make crowns of gold. They are the smallest you could imagine. Sooner or later everybody needs my help, yet many people are afraid to let me help them. Who am I? -Riddles

Last Answer : I am a Dentist.

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Description : A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Last Answer : C. Distortion of impression

The setting expansion of casting investment is approximately A. 0 to 0.1% B. 0.1 to 0.5% C. 0.5 to 1% D. 1.1 to 1.6%

Description : The setting expansion of casting investment is approximately A. 0 to 0.1% B. 0.1 to 0.5% C. 0.5 to 1% D. 1.1 to 1.6%

Last Answer : B. 0.1 to 0.5%

In cementing Maryland or Roche bridges, the effect is generally to, a. Lighten the colour of the teeth by the opacity of the cement b. Darken the colour of the abutment by the presence of metal on the lingual c. Have no detrimental colour effect. d. Darken the abutment teeth by incisal metal coverage

Description : In cementing Maryland or Roche bridges, the effect is generally to, a. Lighten the colour of the teeth by the opacity of the cement b. Darken the colour of the abutment by the presence ... lingual c. Have no detrimental colour effect. d. Darken the abutment teeth by incisal metal coverage

Last Answer : c. Have no detrimental colour effect.

What sort of alloys do you use for bridges: A. Ductile B. Hard C. High sensitivity

Description : What sort of alloys do you use for bridges: A. Ductile B. Hard C. High sensitivity

Last Answer : B. Hard

The type of gold that is used for dental bridges is, A. Hard 18% B. Type IV 75%

Description : The type of gold that is used for dental bridges is, A. Hard 18% B. Type IV 75%

Last Answer : B. Type IV 75%

Where do Maryland bridges lose retention often: A. Resin-metal B. Resin enamel C. Resin layer

Description : Where do Maryland bridges lose retention often: A. Resin-metal B. Resin enamel C. Resin layer

Last Answer : A. Resin-metal

Which of the following is the costliest material of construction used in pressure vessel construction? (A) Low alloy steel (B) Lead (C) Titanium (D) High alloy steel

Description : Which of the following is the costliest material of construction used in pressure vessel construction? (A) Low alloy steel (B) Lead (C) Titanium (D) High alloy steel

Last Answer : (C) Titanium

Discuss the properties and applications of Ti-6Al-4V titanium alloy.

Description : Discuss the properties and applications of Ti-6Al-4V titanium alloy.

Last Answer : Properties of Ti-6Al-4V 1. The high strength 2. Low weight ratio 3. Outstanding corrosion resistance 4. Good machinability 5. Excellent mechanical properties Applications: Ti6Al4V is ... as implants and prosthesis 3. Marine applications 4. Chemical industry 5. Gas turbines Powder

Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in each other in the molten state. C. Amalgam is an alloy of two or more metals, one of them is mercury D. Amalgam is a metallic substance in powder or tablet from that is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Description : Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in ... is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Last Answer : C. Amalgam is an alloy of two or more metals, one of them is mercury

A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with extra mercury to give easier manipulative qualities C. Several small mixes, sequentially triturated D. Several small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Description : A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with ... small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Last Answer : C. Several small mixes, sequentially triturated

Which of the following is universally employed as the low expansion metal in the bimetallic thermometer, which is an iron-nickel alloy containing 36% nickel and has very low co-efficient of expansion (1/20th of ordinary metals) ? (A) Invar (B) Constantan (C) Chromel (D) Alumel

Description : Which of the following is universally employed as the low expansion metal in the bimetallic thermometer, which is an iron-nickel alloy containing 36% nickel and has very low co-efficient of expansion (1/20th of ordinary metals) ? (A) Invar (B) Constantan (C) Chromel (D) Alumel

Last Answer : (A) Invar

Which oxide of the following metals is often used as a pigment in white paint? w) titanium x) cobalt y) nickel z) vanadium

Description : Which oxide of the following metals is often used as a pigment in white paint? w) titanium x) cobalt y) nickel z) vanadium

Last Answer : ANSWER: W -- TITANIUM

Name the alloy used for casting engine parts?

Description : Name the alloy used for casting engine parts?

Last Answer : Silumin

The contraction (Gaseous) porosity in inlays is related to:** A. Overheating of the alloy B. Molten gases C. Diameter of the sprue D. Overheating of investment

Description : The contraction (Gaseous) porosity in inlays is related to:** A. Overheating of the alloy B. Molten gases C. Diameter of the sprue D. Overheating of investment

Last Answer : B. Molten gases

Which of the following elements replaced eka-Aluminium in Mendeleev's Periodic Table? (1) Scandium (2) Gallium (3) Titanium (4) Germanium

Description : Which of the following elements replaced eka-Aluminium in Mendeleev's Periodic Table? (1) Scandium (2) Gallium (3) Titanium (4) Germanium

Last Answer : (2) Gallium

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

Which of the following has the highest density and the lowest melting point? (A) Stainless steel (B) Titanium (C) Lead (D) Aluminium

Description : Which of the following has the highest density and the lowest melting point? (A) Stainless steel (B) Titanium (C) Lead (D) Aluminium

Last Answer : (C) Lead

Which of the following is the lightest of engineering metals? (A) Magnesium (B) Aluminium (C) Titanium (D) Tin

Description : Which of the following is the lightest of engineering metals? (A) Magnesium (B) Aluminium (C) Titanium (D) Tin

Last Answer : (A) Magnesium

The most abundant metal present in the earth's crust is; (A) Iron (B) Copper (C) Titanium (D) Aluminium

Description : The most abundant metal present in the earth's crust is; (A) Iron (B) Copper (C) Titanium (D) Aluminium

Last Answer : (D) Aluminium