Which of the following is the costliest material of construction used in pressure vessel construction? (A) Low alloy steel (B) Lead (C) Titanium (D) High alloy steel

Which of the following is the costliest material of construction used in pressure vessel construction?
(A) Low alloy steel
(B) Lead
(C) Titanium
(D) High alloy steel
by

1 Answer

Answer :

(C) Titanium
by

Related questions

Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms

Description : Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms

Last Answer : (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature

Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron

Description : Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron

Last Answer : (A) Lead

Which of the following has the highest density and the lowest melting point? (A) Stainless steel (B) Titanium (C) Lead (D) Aluminium

Description : Which of the following has the highest density and the lowest melting point? (A) Stainless steel (B) Titanium (C) Lead (D) Aluminium

Last Answer : (C) Lead

Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Description : Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Last Answer : Option B

Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel(B) 18/8 stainless steel(C) Mild steel(D) High silicon iron (14% Si)

Description : Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel (B) 18/8 stainless steel (C) Mild steel (D) High silicon iron (14% Si)

Last Answer : (A) Molybdenum stainless steel

The commonly used base for iron and steel work, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Description : The commonly used base for iron and steel work, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Last Answer : Answer: Option A

Cutter bar is made up of which material a) High grade steel. b) Low carbon alloy steel. c) Platinum. d) High speed tool steel

Description : Cutter bar is made up of which material a) High grade steel. b) Low carbon alloy steel. c) Platinum. d) High speed tool steel

Last Answer : High grade steel

The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Last Answer : (B) Lead

Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel

Description : Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel

Last Answer : (B) Cast iron

Material of construction of foundry crucible is (A) Lead (B) Stainless steel (C) Graphite

Description : Material of construction of foundry crucible is (A) Lead (B) Stainless steel (C) Graphite

Last Answer : Option C

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

Titanium is used in dentistry A. In a very pure form in implants B. In an alloy with aluminium in casting for crowns and bridges C. In an alloy with nickel in orthodontic wires D. A and B E. A, B and C

Description : Titanium is used in dentistry A. In a very pure form in implants B. In an alloy with aluminium in casting for crowns and bridges C. In an alloy with nickel in orthodontic wires D. A and B E. A, B and C

Last Answer : E. A, B and C

Discuss the properties and applications of Ti-6Al-4V titanium alloy.

Description : Discuss the properties and applications of Ti-6Al-4V titanium alloy.

Last Answer : Properties of Ti-6Al-4V 1. The high strength 2. Low weight ratio 3. Outstanding corrosion resistance 4. Good machinability 5. Excellent mechanical properties Applications: Ti6Al4V is ... as implants and prosthesis 3. Marine applications 4. Chemical industry 5. Gas turbines Powder

most suitable material of construction for a sewer to carry sewage under high pressure is (A) Asbestos cement (B) Steel (C) Cement concrete (D) Stoneware

Description : most suitable material of construction for a sewer to carry sewage under high pressure is (A) Asbestos cement (B) Steel (C) Cement concrete (D) Stoneware

Last Answer : Option B

Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Description : Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Last Answer : (B) Carbide

Molten phthalic anhydride is stored in a/an __________ vessel. (A) Aluminium (B) Nickel clad steel (C) Lead lined steel (D) Glass lined steel

Description : Molten phthalic anhydride is stored in a/an __________ vessel. (A) Aluminium (B) Nickel clad steel (C) Lead lined steel (D) Glass lined steel

Last Answer : (A) Aluminium

Hydrochloric acid is stored in a __________ steel vessel. (A) Lead lined (B) Rubber lined (C) Glass lined (D) Stainless

Description : Hydrochloric acid is stored in a __________ steel vessel. (A) Lead lined (B) Rubber lined (C) Glass lined (D) Stainless

Last Answer : (B) Rubber lined

Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Last Answer : (B) Lead

Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Last Answer : (A) Low carbon

Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy

Last Answer : (A) Low carbon

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Last Answer : (B) Cast iron

Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Last Answer : (C) Cast iron

The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Description : The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Last Answer : Answer: D

Which of the following is an yellow pigment? (A) Titanium dioxide (B) Ferrous sulphate (C) Lead chromates (D) Zinc sulphides

Description : Which of the following is an yellow pigment? (A) Titanium dioxide (B) Ferrous sulphate (C) Lead chromates (D) Zinc sulphides

Last Answer : (C) Lead chromates

Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Last Answer : (A) Electrolysis of water

Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven gas(B) Steam reforming of naphtha(C) Cracking of natural gas(D) Electrolysis of water

Description : Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven ga (B) Steam reforming of naphtha (C) Cracking of natural gas (D) Electrolysis of water

Last Answer : (D) Electrolysis of water

Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Description : Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Last Answer : Berl saddles

Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Description : Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Last Answer : (C) Electrolysis of water

Which of the following low melting alloy containing bismuth and lead is used for electric fuse? (A) Wood's metal (B) Babbitt metal (C) Monel metal (D) Duralumin

Description : Which of the following low melting alloy containing bismuth and lead is used for electric fuse? (A) Wood's metal (B) Babbitt metal (C) Monel metal (D) Duralumin

Last Answer : Option A

__________ alloys have the highest specific strength of all the structural materials out of the following. (A) Magnetic steel (B) Titanium (C) Chromium (D) Magnesium

Description : __________ alloys have the highest specific strength of all the structural materials out of the following. (A) Magnetic steel (B) Titanium (C) Chromium (D) Magnesium

Last Answer : (B) Titanium

In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Description : In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Last Answer : (B) Cast iron

Which of the following commonly used condenser tube materials has the lowest thermal conductivity? (A) Admiralty brass (B) Stainless steel (C) Aluminium brass (D) Titanium

Description : Which of the following commonly used condenser tube materials has the lowest thermal conductivity? (A) Admiralty brass (B) Stainless steel (C) Aluminium brass (D) Titanium

Last Answer : (B) Stainless steel

Liquid nitrogen containers can be made from (A) Ferritic stainless steel (B) HSLA steel (C) Titanium (D) Austenitic stainless steel

Description : Liquid nitrogen containers can be made from (A) Ferritic stainless steel (B) HSLA steel (C) Titanium (D) Austenitic stainless steel

Last Answer : Option B

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

__________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel

Description : __________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel

Last Answer : Option D

Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low (B) Very high pressure is required resulting in costly pressure vessel (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Description : Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low ... (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Last Answer : (A) Rate of reaction is very low

The most commonly used base for timber painting, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Description : The most commonly used base for timber painting, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Last Answer : Answer: Option C

What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Description : What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Last Answer : a) Titanium dioxide

Which is the world's costliest car ? -Do You Know?

Description : Which is the world's costliest car ? -Do You Know?

Last Answer : Bugatti La Voiture Noire Bugatti La Voiture Noire: $18.68 million or Rs 132 crore Bugatti takes home the trophy for the most expensive car in the world. Making its debut a year ago at the Geneva International Motor Show, the one-of-a-kind La Voiture Noire is priced at $18.68 million.

Economic saving of time results by crashing (A) Cheapest critical activity (B) Cheapest noncritical activity (C) Costliest critical activity (D) Costliest noncritical activity

Description : Economic saving of time results by crashing (A) Cheapest critical activity (B) Cheapest noncritical activity (C) Costliest critical activity (D) Costliest noncritical activity

Last Answer : (A) Cheapest critical activity

Which braking system on the locomotives is the costliest among the following?

Description :  Which braking system on the locomotives is the costliest among the following? A) Vacuum braking on diesel locomotives B) Vacuum braking on steam locomotives C) Regenerative braking on electric locomotives D) All braking systems are equally costly

Last Answer : Which braking system on the locomotives is the costliest among the following? A) Vacuum braking on diesel locomotives B) Vacuum braking on steam locomotives C) Regenerative braking on electric locomotives D) All braking systems are equally costly

The type of steel used for precision levelling staff, is (A) Titanium steel (B) Carbon steel (C) Invar (D) Stainless ste

Description : The type of steel used for precision levelling staff, is (A) Titanium steel (B) Carbon steel (C) Invar (D) Stainless steel

Last Answer : Answer: Option C

Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Description : Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Last Answer : d) Austenitic stainless steels

Specialty low-alloy steel DMR-1700 a cost-effective replacement of mar- aging steels is product of (a) DLRL (b) DEAL (c) DMRL (d) DEBEL

Description : Specialty low-alloy steel DMR-1700 a cost-effective replacement of mar- aging steels is product of (a) DLRL (b) DEAL (c) DMRL (d) DEBEL

Last Answer : (c) DMRL

Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Description : Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Last Answer : (B) Silicon sheet steel.

Refined acetic acid storage vessel are made of (A) Copper (B) Aluminium (C) High carbon steel (D) Nickel

Description : Refined acetic acid storage vessel are made of (A) Copper (B) Aluminium (C) High carbon steel (D) Nickel

Last Answer : (B) Aluminium