hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?

hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?
by

1 Answer

Answer :

You would need to go to a dental school and get certfied as a technition.
by

Related questions

In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Description : In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Last Answer : A. Contour the wax as part of the fabrication of the working cast

Titanium is used in dentistry A. In a very pure form in implants B. In an alloy with aluminium in casting for crowns and bridges C. In an alloy with nickel in orthodontic wires D. A and B E. A, B and C

Description : Titanium is used in dentistry A. In a very pure form in implants B. In an alloy with aluminium in casting for crowns and bridges C. In an alloy with nickel in orthodontic wires D. A and B E. A, B and C

Last Answer : E. A, B and C

Do plastic retainers leach carcinogens?

Description : Do plastic retainers leach carcinogens?

Last Answer : nahhh, you’re good!

Does your employer offer orthodontic and/or vision insurance?

Description : Does your employer offer orthodontic and/or vision insurance?

Last Answer : answer:No coverage…...however they offer reimbursement w/ pretax dollars of income. So we effectively get the coverage for a discount.

Prices For Braces: Orthodontic Treatment Costs?

Description : Prices For Braces: Orthodontic Treatment Costs?

Last Answer : Orthodontic treatment is usually not covered by most health insurance plans because it is considered a cosmetic procedure. This means that people who want to wear braces will have to pay for the ... is a much better solution than placing more than five thousand dollars up front before treatment.

Parents' Guide to Considering the Cost of Orthodontic Braces?

Description : Parents' Guide to Considering the Cost of Orthodontic Braces?

Last Answer : One of the most common expenses that a parent must consider for growing children is braces. Orthodontic work in general tends to be costly. During consultation, the orthodontist will give a better assessment of ... . The severity of the issues that need to be corrected will be a huge factor in cost

Denture stomatitis is commonly associated with, A. The continuous wearing of removable orthodontic appliances in otherwise healthy patient B. The proliferation of hypertrophic tissue at the denture periphery C. The overgrowth of some constituents of oral normal microflora D. Allergy to denture base material

Description : Denture stomatitis is commonly associated with, A. The continuous wearing of removable orthodontic appliances in otherwise healthy patient B. The proliferation of hypertrophic tissue at the denture ... overgrowth of some constituents of oral normal microflora D. Allergy to denture base material

Last Answer : C. The overgrowth of some constituents of oral normal microflora

The removable partial denture requires relining what would be the most appropriate action, A. take a new impression by asking the patient to occlude on it B. Provide equal space (maybe it was thickness) between denture and gingival tissues. C. Make sure the framework and retainers are seated in place before taking impression

Description : The removable partial denture requires relining what would be the most appropriate action, A. take a new impression by asking the patient to occlude on it B. Provide equal space (maybe it was ... gingival tissues. C. Make sure the framework and retainers are seated in place before taking impression

Last Answer : C. Make sure the framework and retainers are seated in place before taking impression

A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no other pathology. What is your management: A. Remove the dentigerous cyst B. Soft tissues recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Description : A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no ... recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Last Answer : C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Description : What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Last Answer : A. Gingival /Below/

After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask patient to bite firmly while impression is setting B. Hold the metal base frame against the abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Description : After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask ... abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Last Answer : B. Hold the metal base frame against the abutment tooth while setting

In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each other C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

Hi, I am from Hyderabad. I have worked in Non-IT Sector for 2.6years. Now, I would like to move into IT Sector. Which is the best course to learn in these conditions?

Description : Hi, I am from Hyderabad. I have worked in Non-IT Sector for 2.6years. Now, I would like to move into IT Sector. Which is the best course to learn in these conditions?

Last Answer : This Fluther meme will never die. I suppose the appliance service center has an I.T. department. A network+ certification will get you in the door for simple desktop support. Then you can study for ... help you with this. It's self study so ignore anyone posting links to schools or prep courses.

Does anyone know if Jonathan Wright's story Firehouse Down is true or a fabrication?

Description : Does anyone know if Jonathan Wright's story Firehouse Down is true or a fabrication?

Last Answer : answer:This would not be the first hoax to come from self-described heroes and experts of 9/11. There was another reference recently to another security consultant who claimed to have been ... find that out. But you might ask how the school official has already determined that for himself.

Can somebody recommend any good book on steel structure fabrication?

Description : Can somebody recommend any good book on steel structure fabrication?

Last Answer : Bf is a structural engineer. What type of structures are you interested in and are you looking for info re: bolted or welded? You might try asking on forums like eng-tips.com (think that’s the right URL, might have ta Google) or http://cr4.globalspec.com also.

Which is the Best Steel Fabrication company in Dubai?

Description : Which is the Best Steel Fabrication company in Dubai?

Last Answer : Al Baraq Steel , One of the leading steel fabrication Company in UAE

What are some popular fabrication choices for deer-proof garden fences?

Description : What are some popular fabrication choices for deer-proof garden fences?

Last Answer : There are several companies that provide deer-proof garden fence fabrication. Fabrication choices include polyprophylene.

Where can I find a good place online that handles aluminum fabrication?

Description : Where can I find a good place online that handles aluminum fabrication?

Last Answer : Check out Custom Aluminum Works. They specialize in Aluminum Fabrication for fire and rescue vehicles, but they do good work. Aluminum Marine handles aluminum fabrication for boats, but I'm sure they could do some specialized work for you also.

What is true, half true, or a complete fabrication we tell students about the first Thanksgiving?

Description : What is true, half true, or a complete fabrication we tell students about the first Thanksgiving?

Last Answer : The history of Thanksgiving touches on just about everything—from fresh venison and questionable bathing habits to “Mary Had a Little Lamb.” And it’s probably a lot more complicated than you think.

The material used in the fabrication of a transistor is – (1) Aluminium (2) Copper (3) Silicon (4) Silver

Description : The material used in the fabrication of a transistor is – (1) Aluminium (2) Copper (3) Silicon (4) Silver

Last Answer : (3) Silicon Explanation: A transistor is a semiconductor device used to amplify and switch electronic signals and electrical power. The first transistors were made from germanium (Ge). ... compound semiconductor material gallium arsenide (GaAs) and the semiconductor alloy silicon germanium (SiGe).

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication(C) Develop new improved properties not present in the original resin(D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resin (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing

Description : Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing

Last Answer : (A) Welding

Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Description : Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Last Answer : (B) High pressure drop of the gas

Which of the following has the greatest effect on product's reliability and maintenance characteristic? 1. conceptualization 2. product design 3. fabrication 4. a and b

Description : Which of the following has the greatest effect on product's reliability and maintenance  characteristic? 1. conceptualization  2. product design  3. fabrication  4. a and b

Last Answer : 4. a and b

Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Description : Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Last Answer : (C) To obtain higher heat transfer co-efficient and shorter tube

The type of threats on the security of a computer system or network are …………………….. i) Interruption ii)Interception iii) Modification iv) Creation v)Fabrication a) i, ii, iii and iv only b) ii, iii, iv and v only c) i, ii, iii and v only d) All i, ii, iii, iv and v

Description : The type of threats on the security of a computer system or network are …………………….. i) Interruption ii)Interception iii) Modification iv) Creation v)Fabrication a) i, ii, iii and iv only b) ii, iii, iv and v only c) i, ii, iii and v only d) All i, ii, iii, iv and v

Last Answer : c) i, ii, iii and v only

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

How can loss be reduced during construction (or fabrication) of optical fibers?

Description : How can loss be reduced during construction (or fabrication) of optical fibers?

Last Answer : By removing the impurities from optical fiber.

Explain the silicon semiconductor fabrication process.

Description : Explain the silicon semiconductor fabrication process.

Last Answer : Silicon wafer Preparation (2) Epitaxial Growth (2) Oxidation (2) Photolithography (2) Diffusion(2) Ion Implantation (2) Isolation technique (2) Metallization (1) Assembly processing & Packaging (1)

explain with neat diagrams the various CMOS fabrication

Description : explain with neat diagrams the various CMOS fabrication

Last Answer : technology P-well process (4) N-well process (4) Silicon-On-Insulator Process (4) Twin- tub Process (4)

Give the basic process for IC fabrication

Description : Give the basic process for IC fabrication

Last Answer : _ Silicon wafer Preparation _ Epitaxial Growth _ Oxidation _ Photolithography _ Diffusion _ Ion Implantation _ Isolation technique _ Metallization _ Assembly processing & Packaging

How is preheat for tack welds during assembly and fit up determined? a) By the welders as they have extensive knowledge b) The fabrication specification/WPS will give the requirements c) The fabrication drawing will give all the information d) Any temperature will do as it is only a tack weld

Description : How is preheat for tack welds during assembly and fit up determined? a) By the welders as they have extensive knowledge b) The fabrication specification/WPS will give the requirements c) The fabrication drawing will give all the information d) Any temperature will do as it is only a tack weld

Last Answer : b) The fabrication specification/WPS will give the requirements

The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Description : The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Last Answer : C. 2/3 tooth/root length

Why would you invest the wax pattern as soon as possible in an indirect inlay fabrication: A. Minimise distortion B. Avoid contraction C. Avoid expansion

Description : Why would you invest the wax pattern as soon as possible in an indirect inlay fabrication: A. Minimise distortion B. Avoid contraction C. Avoid expansion

Last Answer : A. Minimise distortion

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages

During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than the original impression C. The strength of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Description : Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than ... of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Last Answer : A. They lack accurate reproduction of surface details

The type of threats on the security of a computer system or network are …………………….. i) Interruption ii) Interception iii) Modification iv) Creation v) Fabrication A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, ii, iii and v only D) All i, ii, iii, iv and v

Description : The type of threats on the security of a computer system or network are …………………….. i) Interruption ii) Interception iii) Modification iv) Creation v) Fabrication A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, ii, iii and v only D) All i, ii, iii, iv and v

Last Answer : C) i, ii, iii and v only

The information in ROM is stored (A) By the user any number of times. (B) By the manufacturer during fabrication of the device. (C) By the user using ultraviolet light. (D) By the user once and only once.

Description : The information in ROM is stored (A) By the user any number of times. (B) By the manufacturer during fabrication of the device. (C) By the user using ultraviolet light. (D) By the user once and only once.

Last Answer : (B) By the manufacturer during fabrication of the device.

What is the name of the white clay which has been used for thousands of years in the fabrication of ceramic bodies? Is it: w) Talc x) Kaolin y) Feldspar z) Quartz

Description : What is the name of the white clay which has been used for thousands of years in the fabrication of ceramic bodies? Is it: w) Talc x) Kaolin y) Feldspar z) Quartz

Last Answer : ANSWER: X -- KAOLIN

The material used in the fabrication of a transistor is (1) Aluminium (2) Copper (3) Silicon (4) Silver

Description : The material used in the fabrication of a transistor is (1) Aluminium (2) Copper (3) Silicon (4) Silver

Last Answer : Silicon

fabrication of semiconductor device and describe its need.

Description : State any four materials used in fabrication of semiconductor device and describe its need.

Last Answer : For fabrication of semiconductor devices like transistors diode, solar cell etc. we have to make use of following types of materials  1. Substrate: o It is used for deposition of thin ... . o Metal cans and sealed glass containers satisfy the extreme requirements of space and military users.

Explain fabrication using N-well process.

Description : Explain fabrication using N-well process.

Last Answer : N-Well process: The N-well CMOS circuits are getting more popular because of the lower substrate bias effect on transistor threshold voltage and lower parasitic capacitances associated with source ... overall passivation layer is formed and the openings for accessing bonding pads are defined. 

State any one process for wafer fabrication with diagram

Description : State any one process for wafer fabrication with diagram

Last Answer : Wafer Processing: The basis raw material used is a disk of silicon, which is between 75 mm to 150 mm in diameter and is less than 1mm thick used in semi-conductor plants. Wafers are cut ... Following slicing at least one face of the wafer is polished to flat scratch free mirror finish surface.

What is the correct sequence of the following step in the fabrication of a monolithic, bipolar junction

Description : What is the correct sequence of the following step in the fabrication of a monolithic, bipolar junction transistor? 1. Emitter diffusion 2. Base diffusion 3. Buried layer formation 4. Epi-layer formation Select the correct answer using the codes given ... 2) 4, 3, 1, 2 (3) 3, 4, 2, 1 (4) 4, 3, 2, 1 

Last Answer : What is the correct sequence of the following step in the fabrication of a monolithic, bipolar junction transistor? 1. Emitter diffusion 2. Base diffusion 3. Buried layer formation 4. Epi-layer formation Select the correct answer using the codes ... ) 4, 3, 1, 2 (3) 3, 4, 2, 1 (4) 4, 3, 2, 1 

Why is gold bullion malleable while gold teeth crowns not?

Description : Why is gold bullion malleable while gold teeth crowns not?

Last Answer : The gold in a filling has been melted and mixed with a hardening mineral (palladium, tin, etc.) so it will last longer.

I've had more than two sets of adult teeth should I get my crowns and teeth removed and hope that I get an additional set?

Description : I've had more than two sets of adult teeth should I get my crowns and teeth removed and hope that I get an additional set?

Last Answer : First I must say that I have never heard of anything like that ever. I seriously doubt there would be more to come. Xrays would show however if there were. You can see them on Xrays of children. The adult teeth are visible under the baby teeth.

What can you tell us about your dental crowns or other dental work?

Description : What can you tell us about your dental crowns or other dental work?

Last Answer : I had a few crowns fitted at the local dental school many years ago. They are great and have given me no trouble. Theyare almost as good as the original teeth through I have to be careful when biting apples. The only tip I can give you is to use interdental brushes to clean them.

Had any dental fillings lately? Not crowns; fillings.

Description : Had any dental fillings lately? Not crowns; fillings.

Last Answer : It seems like the fluoride in water is making cavities less common but also you get less as you age, I’ve heard. Many of the problems – crowns, etc. – come from old fillings that have worn out or weakened the tooth.