Where is brake accumulator located?

Where is brake accumulator located?
by

1 Answer

Answer :

The brake accumulator is located on the right  hand side of the aft frame of the main landing  gear wheel well area.
by

Related questions

How many times we can use the brake accumulator without the system pressurized?

Description : How many times we can use the brake accumulator without the system pressurized?

Last Answer : The brake accumulator is used to supply pressurized fluid for operation of parking brake. Without the yellow system pressurized, we can apply parking brakes for a maximum of 7 times.

How much torque would you apply to tighten the nut of brake assembly?

Description : How much torque would you apply to tighten the nut of brake assembly?

Last Answer : 150 ft.-lbs.

Which hydraulic system supplies brake pressure?

Description : Which hydraulic system supplies brake pressure?

Last Answer : The green system pressurized the normal braking system while the yellow hydraulic system provides hydraulic pressure for alternate braking and parking brake.

Tell me about IDG? Or How the IDG functions?

Description : Tell me about IDG? Or How the IDG functions?

Last Answer : IDG or Integrated Drive Generator is an AC generator integrated with a Constant Speed Drive or CSD. The CSD is driven by the Accessory Gear Box (AGB) which is in turn driven by the engine. Since engine speed varies

What is the range of fuelling?

Description : What is the range of fuelling?

Last Answer : A circular area of 6 meter radius from the fuelling point or fuelling nozzle is termed as the range of fuelling.

What is LRU? Mention some of the LRUs in engine and airframe?

Description : What is LRU? Mention some of the LRUs in engine and airframe?

Last Answer : LRU or Line Replaceable Unit is a complex unit of the aircraft which can be quickly and easily removed while the aircraft is at bay or ramp area. It is a sealed unit designed for quick ... Valve. Some of the LRUs in airframe are all communication and navigation antennas, black box etc.

What is flap asymmetry? What will be the action should there is a flap asymmetry?

Description : What is flap asymmetry? What will be the action should there is a flap asymmetry?

Last Answer : If flaps of left and right wing are moving at different speed or the inboard and outboard flap of the same wing are moving a different speeds, then one flap will travel to a higher ... take-off thrust. The full authority type EEC is called FADEC or Full Authority Digital Electronic Control.

What are the meanings of different colours of the annunciator lights in cockpit?

Description : What are the meanings of different colours of the annunciator lights in cockpit?

Last Answer : RED: It indicates a failure in the system that requires immediate attention and action of the crew. AMBER: It indicates a failure or malfunction of a system that requires crew awareness, ... operation of a back up system. BLUE: It indicates normal operation of a temporarily used system.

How APU is started?

Description : How APU is started?

Last Answer : To start the APU a. Put the BAT switches ON. b. Push the MASTER SWITCH. A blue light will illuminate. c. Wait until FLAP OPEN indication appears on the ECAM System Display. d. Once intake flap is open ... g. Push the EXT PWR switch to OFF. h. Put the APU BLEED ON, indicated by a blue light.

How will you drain the reservoir if it is overfilled?

Description : How will you drain the reservoir if it is overfilled?

Last Answer : To drain the excess amount of fluid filled, a drain port is provided at the bottom of the yellow and green reservoir. For blue system, a drain port is provided on the blue hydraulic panel.

What are the safety precautions will you take before re-filling the hydraulic reservoirs?

Description : What are the safety precautions will you take before re-filling the hydraulic reservoirs?

Last Answer : The safety precautions for servicing of hydraulic reservoirs can be stated as below: a. Hydraulic system depressurized. b. All slats and flaps are retracted. c. Thrust reverser is closed. d. Landing gear doors closed. e. Cargo doors closed.

What are the modules of this engine?

Description : What are the modules of this engine?

Last Answer : There are 5 modules in this engine. They are a. Fan b. Low Pressure (LP) compressor and intermediate case c. High Pressure (HP) system d. Low Pressure turbine e. Accessory Gearbox

What are the specification of this engine?

Description : What are the specification of this engine?

Last Answer : It is a two-spool high-bypass ratio engine having take-off thrust of 30,000 lbs. flat rated to approximately +30 degree Celsius. The engine has a single stage fan and 4 booster stages driven by 5 low pressure turbine and 10 high pressure compressor stages driven by 2 high pressure turbine.

What does each digit and character specifies?

Description : What does each digit and character specifies?

Last Answer : IAE stands for the manufacturer International Aero Engine. V25 designates that this engine comes under original V2500 series engines. 27 designates the rated sea-level thrust of the engine as ... to install on aircraft of Airbus Industrie. 5 designates the mechanical standard of the engine.

Which engine is installed in our (Indigo Airlines) aircraft?

Description : Which engine is installed in our (Indigo Airlines) aircraft?

Last Answer : IAE V2527-A5.

How APU provide constant electrical supply?

Description : How APU provide constant electrical supply?

Last Answer : Once acceleration phase of starting cycle is completed, the APU rpm is governed by fly weight mechanism. Any change in the rpm of the output shaft causes the force on the flyweight to change ... rpm. Thus the APU generator can supply electrical supply of constant frequency at 400 Hz 115 V.

In aircraft operation, the centre tank is used up before wing tanks? Why?

Description : In aircraft operation, the centre tank is used up before wing tanks? Why?

Last Answer : In normal operation, first fuel from the centre tank is used and then from wing inner fuel cell and at last from the wing outer cell. The centre tank is used first in order to obtain better ... the fuel can flow from wing to engine under gravity also which is not possible from the centre tank.

Up to what altitude APU can be operated?

Description : Up to what altitude APU can be operated?

Last Answer : APU can be operated up to around FL420. Up to around FL 250, the APU can provide electrical power of 90 kVA ampere rating as well as pneumatic power for air conditioning/pressurization and ... of providing pneumatic power and electrical power it provide drops to power rating of 66 kVA.

What is THS? Why is it used?

Description : What is THS? Why is it used?

Last Answer : THS or Trimmable Horizontal Stabilizer is actually a horizontal stabilizer, or tail plane as it is sometimes called, which can change its incidence angle in flight, automatically or manually to ... angle of attack of the entire horizontal stabilizer to maintain a correct angle of attack of the

What are the solvents used in compressor wash?

Description : What are the solvents used in compressor wash?

Last Answer : In eco wash, pure demineralized water is used.

What is the difference between eco wash and compressor wash?

Description : What is the difference between eco wash and compressor wash?

Last Answer : Eco wash itself is basically a compressor wash. In early compressor wash, the water being used in compressor wash are discarded as it is expelled through the engine core exhaust. But in eco wash, ... its ecological balance and that is why this type of compressor wash is termed as eco wash.

What is eco wash?

Description : What is eco wash?

Last Answer : Eco wash is the name given to compressor wash being employed in now-a-days.

What are the initial and final torque values for A321 main landing gear wheels?

Description : What are the initial and final torque values for A321 main landing gear wheels?

Last Answer : The initial or bearing setting torque value for A321 main landing gear wheel is 310 ft.-lbs. and the final torque value is 160 ft.-lbs.

What are the electrical supply provided by the different supply sources of aircraft?

Description : What are the electrical supply provided by the different supply sources of aircraft?

Last Answer : The IDGs installed on each engine and the APU generator supply 115V 400 Hz 3 phase AC supply of 90 kVA. The emergency generator i.e. CSM/G supply 115 V 400 Hz 3 phase AC supply of 5 kVA ... supply connected to the aircraft should supply 115 V 400 Hz 3 phase AC supply of 90 kVA power rating.

What are the conditions that deploys the RAT?

Description : What are the conditions that deploys the RAT?

Last Answer : RAT is automatically deployed if it senses a. Both hydraulic system EDPs failed and loss of pressure b. Failure of both AC bus 1 and 2. c. Aircraft speed is above 100 knots.

How RAT provides hydraulic and electrical power? What is the electrical supply from CSMG?

Description : How RAT provides hydraulic and electrical power? What is the electrical supply from CSMG?

Last Answer : As RAT is deployed, its blades rotates at a high speed. The shaft is connected to a driving part of blue hydraulic system emergency pressure pump. Thus the blue hydraulic system is pressurized and ... the aircraft the emergency electrical supply of 115 V 400 Hz AC supply of 5 kVA rating.

What are the systems powered by RAT?

Description : What are the systems powered by RAT?

Last Answer : RAT powers the blue hydraulic system and provides basic electrical power through Constant Speed Motor/Generator (CSM/G).

What is RAT?

Description : What is RAT?

Last Answer : RAT or Ram Air Turbine is a small unit having to small aerofoil shaped blade installed in it. When it is deployed to the incoming airstream, the blades rotate at high speed providing emergency drive for the blue hydraulic system pressure pump.

What are computers used in A321 related to landing gear and flight controls?

Description : What are computers used in A321 related to landing gear and flight controls?

Last Answer : Landing gear related computers are LGCIU - Landing Gear Control and Interface Unit BSCU - Brake and Steering Control Unit ABCU - Alternate Braking Control Unit Flight controls related ... Computer FMGC - Flight Management and Guidance Computer FCDC - Flight Control Data Concentrators

What is air pressure charge in hydraulic accumulators in A321?

Description : What is air pressure charge in hydraulic accumulators in A321?

Last Answer : The three system accumulators are pressurized with N2 to a pressure of 1950 psi. The brake accumulator is pressurized to 1200 psi pressure.

What have you learnt in the last 6 months? (Where have you worked recently and what have you learnt?)

Description : What have you learnt in the last 6 months? (Where have you worked recently and what have you learnt?)

Last Answer : I have undergone apprenticeship in Air India recently. I have performed wheel change, IDG oil filter change, accumulator air pressure charging, hydraulic system servicing, compressor eco wash on Airbus A321.

Which of the two hydraulic systems, Yellow and Blue, is generally used on ground? Give your reasons for that.

Description : Which of the two hydraulic systems, Yellow and Blue, is generally used on ground? Give your reasons for that.

Last Answer : Normally the yellow hydraulic system used. Firstly because, if at any point, if we require the green system to be pressurized for operation of some component, we can pressurize it with the ... need yellow hydraulic system to be pressurized. Blue system is not available for cargo door operation.

If hydraulic power is required on ground, which hydraulic system can be used and why?

Description : If hydraulic power is required on ground, which hydraulic system can be used and why?

Last Answer : Both Yellow and Blue hydraulic system can be used. Because, only Yellow and Blue hydraulic systems are equipped with electric pump?

A hyper metal accumulator is

Description : A hyper metal accumulator is

Last Answer : A hyper metal accumulator is A. Daucos carota B. Nicotiana tabacum C. Arabidopsis D. Thlaspi geosingensis

A potentiometer wire has length `4 m` and resistance `8 Omega`. The resistance that must be connected in series with the wire and an accumulator of e.

Description : A potentiometer wire has length `4 m` and resistance `8 Omega`. The resistance that must be connected in series with the wire and an accumulator of e.

Last Answer : A potentiometer wire has length `4 m` and resistance `8 Omega`. The resistance that must be connected in ... Omega` C. `44 Omega` D. `48 Omega`

What is an accumulator bet?

Description : What is an accumulator bet?

Last Answer : What is the answer ?

What is the definition of accumulator?

Description : What is the definition of accumulator?

Last Answer : An accumulator is a collector, or a person who accumulates things. In engineering terms, a hydraulic accumulator is a hydraulic flywheel that stores potential energy

What the Difference between accumulator and instruction register 8080?

Description : What the Difference between accumulator and instruction register 8080?

Last Answer : Examples: /360: no accumulator 8080: A 6800: A and B 8086: AX ...

Main storage is also called A) Accumulator B) Control Unit C) Register Unit D) Memory

Description : Main storage is also called A) Accumulator B) Control Unit C) Register Unit D) Memory

Last Answer : Answer : D

A storage area used to store data to a compensate for the difference in speed at which the different units can handle data is A) Memory B) Buffer C) Accumulator D) Address

Description : A storage area used to store data to a compensate for the difference in speed at which the different units can handle data is A) Memory B) Buffer C) Accumulator D) Address

Last Answer : Answer : B

In a flooded evaporator refrigerator, an accumulator at suction of compressor is used to (a) collect liquid refrigerant and prevent it from going to compressor (b) detect liquid in vapour (c) superheat the vapour (d) increase refrigeration effect

Description : In a flooded evaporator refrigerator, an accumulator at suction of compressor is used to (a) collect liquid refrigerant and prevent it from going to compressor (b) detect liquid in vapour (c) superheat the vapour (d) increase refrigeration effect

Last Answer : Ans: a

The ___________ contains the address of the next instruction to be executed. a) IR b) PC c) Accumulator d) System counter

Description : The ___________ contains the address of the next instruction to be executed. a) IR b) PC c) Accumulator d) System counter

Last Answer : Answer: b Explanation: PC stands for program counter (It contains the address of the next instruction to be executed)

A group of bits that tell the computer to perform a specific operation is known as_______ A. Instruction code B. Micro-operation C. Accumulator D. Register

Description : A group of bits that tell the computer to perform a specific operation is known as_______ A. Instruction code B. Micro-operation C. Accumulator D. Register

Last Answer : A. Instruction code

The load instruction is mostly used to designate a transfer from memory to a processor register known as_________ A. Accumulator B. Instruction Register C. Program counter D. Memory address Register

Description : The load instruction is mostly used to designate a transfer from memory to a processor register known as_________ A. Accumulator B. Instruction Register C. Program counter D. Memory address Register

Last Answer : A. Accumulator

A basic instruction that can be interpreted by computer generally has ________ A. An operand and an address B. decoder and an accumulator C. Sequence register and decoder D. None of the Above

Description : A basic instruction that can be interpreted by computer generally has ________ A. An operand and an address B. decoder and an accumulator C. Sequence register and decoder D. None of the Above

Last Answer : A. An operand and an address

________ is a register for Short-term, intermediate storage of arithmetic and logic data in a Computer’s CPU. A. Accumulator B. Bus C. Buffer D. None of the Above

Description : ________ is a register for Short-term, intermediate storage of arithmetic and logic data in a Computer’s CPU. A. Accumulator B. Bus C. Buffer D. None of the Above

Last Answer : A. Accumulator

What are the functions of an accumulator?

Description : What are the functions of an accumulator?

Last Answer : The accumulator is the register associated with the ALU operations and sometimes I/O operations. It is an integral part of ALU. It holds one of data to be processed by ALU. It also temporarily stores the result of the operation performed by the ALU.

what is full form of EDSAC: a. Electronic delay source accumulator calculator b. Electronic delay storage automatic code c. Electronic destination source automatic calculator d. Electronic delay storage automatic calculator

Description : what is full form of EDSAC: a. Electronic delay source accumulator calculator b. Electronic delay storage automatic code c. Electronic destination source automatic calculator d. Electronic delay storage automatic calculator

Last Answer : d. Electronic delay storage automatic calculator

The function of these microinstructions is to issue the micro orders to_ _ a. CPU b. Memory c. Register d. Accumulator

Description : The function of these microinstructions is to issue the micro orders to_ _ a. CPU b. Memory c. Register d. Accumulator

Last Answer : a. CPU

Various machine level components are: a. Address register > Program counter c Data register d. Accumulator register e. Memory of 2K,16 bits/word RAM f. Multiplexers g. Allof these

Description : Various machine level components are: a. Address register > Program counter c Data register d. Accumulator register e. Memory of 2K,16 bits/word RAM f. Multiplexers g. Allof these

Last Answer : g. Allof these